Микроконтроллеры

Товары (18756)

C8051F016 - 25MHz Mixed-Signal 32KB MCU | Silicon Labs
C8051F016

C8051F016 - 25MHz Mixed-Signal 32KB MCU | Silicon Labs

Silicon Labs C8051F016 is a mixed-signal 8-bit microcontroller with a 25MHz 8051 core, 32KB flash memory, and a 48-pin TQFP package. Its headline resources are 25 MIPS execution performance, a 10-bit ADC, and two 12-bit DACs. The integrated analog peripherals and on-chip temperature sensor make the device suited to embedded measurement, control, and signal-generation systems. The C8051F016 belongs to the mixed-signal microcontroller hierarchy: an MCU combines a microprocessor core, embedded flash, RAM, timers, interrupts, serial interfaces, and analog conversion peripherals on one semiconductor device. The 8051-compatible core provides a familiar embedded-control software platform, while the C8051F01x family's mixed-signal resources reduce the need for external converters in instrumentation and industrial-control designs. Key features include 32KB of ISP flash, a 10-bit ADC with eight external inputs, programmable throughput up to 100 ksps, and two 12-bit voltage-output DACs with 10 usec settling. Two comparators and an on-chip temperature sensor expand the device's suitability for threshold detection, control loops, and temperature-aware systems. Direct memory access allows sampled ADC data to be stored in RAM without software intervention, improving control-loop responsiveness. The device is identified as an 8051 C8051F01x MCU with 25MHz operation and 32K x 8 flash organization. The verified distributor data specifically associates C8051F016 with the 48-pin TQFP, 7 x 7 mm package. The C8051F016-GQ ordering code is also listed by DigiKey, while C8051F016-GQR is listed by Mouser; these are ordering/package variants and are not treated as distinct functional alternatives here. Typical applications include industrial process monitoring, sensor acquisition, programmable control, mixed-signal instrumentation, data logging, and low-speed signal generation. For designs requiring higher conversion throughput or different analog resources, engineers should compare the complete C8051F00x/01x family and verify the selected order code, package, pinout, memory size, and peripheral map before release. A key design practice is to preserve the 8051 memory and peripheral mapping in firmware while validating the exact device variant's register definitions. Analog layout should use short, well-referenced signal paths, suitable decoupling, and controlled return currents. This page consolidates verified device facts, sourcing links, application guidance, and a conservative replacement analysis rather than treating unverified equivalents as drop-in parts.

Запрос цены Контакты
C8051F020 - 25MHz 8051 Mixed-Signal MCU | Silicon Labs
C8051F020

C8051F020 - 25MHz 8051 Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F020 is a mixed-signal 8-bit system-on-a-chip microcontroller featuring a 25 MHz 8051 core, 64 kB of Flash memory, 4.25 kB of RAM, and mixed-signal peripherals in a 100-pin TQFP package measuring 14 x 14 mm. Its principal specifications include an 8-channel, 12-bit ADC capable of 100 ksps, a 12-bit dual-channel DAC, two comparators, and five 16-bit timers, making it suitable for embedded measurement, industrial control, and analog-monitoring systems. A microcontroller is a semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The C8051F020 belongs to the hierarchy of MCU, mixed-signal microcontroller, 8-bit MCU, and embedded system-on-a-chip. Its analog and digital integration lets a compact embedded design acquire, process, and act on measured signals without requiring several separate external devices. The device provides 64 digital I/O pins, according to the manufacturer data, and combines serial communications with timer and analog resources. The 12-bit ADC includes an eight-channel multiplexer and programmable-gain stage, while the two-channel DAC provides a 12-bit output interface. Five 16-bit timers support accurate event timing, periodic events, and system timing. These resources are significant for designs requiring more than simple digital control. The C8051F020/1/2/3 family combines an 8051-compatible processing core with programmable analog peripherals and dedicated digital interfaces. At the family level, the on-board SAR ADC is described as having an eight-channel input multiplexer, programmable gain amplifier, and maximum throughput of 500 ksps. The individual C8051F020 product page specifies a 100 ksps, eight-channel, 12-bit ADC, so designers should use the device-specific value for this exact selection. Typical applications include industrial process monitoring, sensor acquisition, motor and actuator control, laboratory instrumentation, embedded data logging, and analog control systems. The device is particularly appropriate when an application needs synchronized sampling, precision timing, programmable analog gain, and a compact mixed-signal controller on the same board. When designing around the C8051F020, verify the exact package suffix, supply-voltage limits, clock configuration, analog input range, and exposed-pin assignments against the manufacturer datasheet. The base MPN C8051F020 is associated with a 100-pin TQFP in distributor listings, while ordering suffixes such as -GQ and -GQR identify specific package or shipping variants and must not be treated as interchangeable without checking ordering information. This page combines verified manufacturer specifications, distributor availability and pricing references, strict same-package replacement analysis, and practical design guidance. It is intended to provide engineering context beyond a raw parameter list, helping developers assess the C8051F020 against same-footprint family variants and redesign-level alternatives.

Запрос цены Контакты
C8051F020-GQ - 25MHz 64KB Flash MCU | Silicon Labs
C8051F020-GQ

C8051F020-GQ - 25MHz 64KB Flash MCU | Silicon Labs

The Silicon Labs C8051F020-GQ is an 8-bit mixed-signal microcontroller with a 25 MHz maximum clock, 64 KB of flash memory, and a 100-pin TQFP package measuring 14 x 14 mm. Its integrated system-on-chip design combines a 8051-compatible core, digital I/O, analog conversion, timers, serial communication, memory, and monitoring functions. A microcontroller is a programmable semiconductor device that integrates a CPU, memory, and peripherals into one device. The C8051F02x family belongs to the 8051 microcontroller hierarchy and is designed for embedded control and data-acquisition systems. The C8051F020-GQ can provide 64 digital I/O pins or 32 digital I/O pins according to its configuration, while its mixed-signal peripherals allow analog measurement and control functions to share one device. Key verified features include a 25 MHz operating frequency, 64 KB flash, and an on-chip ADC identified by distributor listings. Retrieved family data also reports two 16-bit SAR ADCs, 16-bit resolution, programmable throughput up to 1 Msps, and operation as two single-ended or one differential converter. An on-chip VDD monitor, watchdog timer, and clock oscillator reduce the amount of external support circuitry required. The device belongs to the C8051F02x mixed-signal MCU family and is positioned for industrial embedded-control, instrumentation, and data-acquisition designs. Its flash memory supports firmware storage, while the high-pin-count TQFP package exposes substantial digital and analog connectivity. The package is appropriate for conventional multilayer PCB assembly rather than a compact BGA or QFN redesign. Typical use cases include sensor acquisition, process monitoring, digital control, communications, and compact embedded instruments. The verified family description highlights two SAR ADC channels and DMA support, allowing sampled data to be transferred into RAM without requiring each byte to be handled directly by software. A critical design requirement is to verify the complete 100-pin assignment, exposed analog functions, supply limits, oscillator options, and peripheral multiplexing against the manufacturer datasheet before layout. The 100-pin package needs adequate routing space, and analog signal paths require careful grounding and decoupling to preserve measurement quality. This page consolidates verified distributor listings, manufacturer product information, package details, and practical replacement guidance. It distinguishes confirmed data from fields that still require schematic- and datasheet-level confirmation, helping engineers evaluate procurement and migration without confusing a similar MCU with a true drop-in replacement.

Запрос цены Контакты
C8051F021 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs
C8051F021

C8051F021 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs

Silicon Labs C8051F021 is a highly integrated mixed-signal 8-bit microcontroller with a powerful 25 MHz 8051-compatible core, 64 kB of Flash memory, 4.25 kB of RAM, and a 10 mm × 10 mm 64-pin QFP package. The device combines 32 digital I/O pins with a 12-bit, 8-channel, 100 ksps ADC and a 12-bit, 2-channel DAC, making it suitable for embedded control, data acquisition, and analog signal conditioning. A microcontroller integrates a processor core, memory, digital peripherals, and analog conversion functions on one semiconductor device. The C8051F021 belongs to the 8-bit microcontroller hierarchy and provides a compact platform for controlling motors, reading sensors, driving displays, and executing real-time embedded algorithms. Its mixed-signal resources reduce the need for separate ADC and DAC components when the required conversion rates and resolution are sufficient. The principal verified specifications include 25 MHz performance, 64 kB of Flash, 4.25 kB of RAM, 32 digital I/O pins, a 12-bit 8-channel ADC capable of 100 ksps, a 12-bit 2-channel DAC, two comparators, and five 16-bit timers. The manufacturer describes the device as an analog-intensive MCU with additional communication interfaces. Exact interface assignments, electrical limits, clock details, and programming requirements should be confirmed in the manufacturer datasheet before layout or firmware design. C8051F021 uses the Silicon Labs C8051F02x family architecture and is identified as a mixed-signal system-on-a-chip MCU. Its combination of Flash memory, RAM, ADC, DAC, comparators, timers, and serial communications supports compact control boards where analog measurements and control outputs share the same MCU. The QFP64 package also provides a mechanically accessible footprint for conventional through-hole assembly or leaded PCB layouts. Typical applications include industrial sensor acquisition, laboratory instrumentation, motor and actuator control, process monitoring, embedded measurement systems, and communication-enabled control nodes. The ADC can sample multiple analog inputs at up to 100 ksps, while the DAC supports two analog outputs. Firmware should configure the converter channels, establish reference and acquisition timing, and calibrate results according to the electrical characteristics in the official documentation. For PCB design, place the MCU close to its bypass capacitors and keep analog signal routing away from high-current switching nodes. Use a stable clock and decoupling arrangement, confirm all package-specific pin functions, and provide adequate power and ground connectivity. Because the verified search results do not include complete electrical, timing, pin-function, or environmental tables, those values remain marked as data needed rather than inferred.

Запрос цены Контакты
C8051F022 - 25MHz Mixed-Signal MCU | Silicon Labs
C8051F022

C8051F022 - 25MHz Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F022 is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 kB of Flash memory, 4.25 kB of RAM, and a 100-pin QFP package. Its integrated analog peripherals include a 10-bit, 8-channel, 100 ksps ADC, a 12-bit, 2-channel DAC, and two comparators. The device also provides 64 digital I/O pins, communication interfaces, and five 16-bit timers for embedded control, data acquisition, and signal-conditioning applications. A microcontroller such as the C8051F022 integrates a processor core, memory, digital I/O, timers, and analog conversion functions on one mixed-signal system-on-chip. The 8051 architecture belongs to the broader 8-bit microcontroller hierarchy and is suited to compact control systems that require deterministic peripheral integration without a separate external ADC or DAC. Its mixed-signal feature set is particularly useful when analog measurements, control outputs, and digital communications must share one device. The C8051F022 combines 25 MHz processing performance with 64 kB Flash and 4.25 kB RAM. The 10-bit ADC supports eight channels at up to 100 ksps, while the 12-bit DAC provides two channels for analog output generation. Two comparators support thresholding and basic signal decisions, and five 16-bit timers help implement timing, waveform generation, and periodic control functions. The manufacturer product page identifies the device as analog-intensive and provides the key feature selection for the C8051F02x family. The device is designed around the CIP-51 8051-compatible core, with integrated mixed-signal peripherals intended to reduce external component count. A 100-pin QFP package provides access to the device's digital and analog resources, but the high pin count also requires careful PCB routing and decoupling. Verified distributor data identifies the commercial orderable variant as C8051F022-GQ in a 100-TQFP package measuring 14 x 14 mm. Typical uses include industrial measurement and control, data-acquisition systems, analog signal generation, communications equipment, and embedded products requiring simultaneous MCU and analog-peripheral operation. The ADC can sample multiple external inputs, the DAC can produce programmable analog outputs, and the comparators can monitor thresholds without requiring separate comparator ICs. Firmware selection should account for the peripheral mix and the required I/O count rather than treating the MCU only as a general-purpose controller. For PCB implementation, place bypass capacitors close to the power pins and route sensitive analog signals away from high-current switching paths. The manufacturer documentation should be used to confirm the complete package pinout, electrical limits, programming method, and peripheral multiplexing before layout release. This page combines verified manufacturer and distributor facts with application-oriented design guidance and explicitly flags information not present in the supplied data.

Запрос цены Контакты
C8051F023 - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs
C8051F023

C8051F023 - 25MHz Mixed-Signal 8-Bit MCU | Silicon Labs

Silicon Labs C8051F023 is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 kB of Flash, 4.25 kB of RAM, and a 64-pin QFP package. It integrates a 10-bit, 8-channel, 100 ksps ADC, a 12-bit, 2-channel DAC, two comparators, five 16-bit timers, and additional communication interfaces for compact embedded control systems. A mixed-signal microcontroller combines a digital processor with analog conversion and comparison functions on one semiconductor die. The C8051F023 sits in the hierarchy MCU → mixed-signal microcontroller → 8-bit microcontroller → embedded semiconductor, providing sensor acquisition, control output, communications, and timing in one device. Its integrated analog peripherals reduce the need for separate ADC, DAC, and comparator components when board space or cost is important. Key features include the 25 MHz processor performance, 64 kB program Flash, 4.25 kB RAM, 8-channel 10-bit ADC sampling at 100 ksps, 2-channel 12-bit DAC, and two comparators. Five 16-bit timers support precise timing, periodic control, and communication tasks. The verified distributor listing identifies the device in a 64-TQFP package measuring 10 mm by 10 mm. The device architecture combines the established 8051 instruction set with analog-intensive peripherals in a mixed-signal system-on-chip design. The ADC and DAC provide conversion functions directly in the control loop, while comparators can support threshold detection and signal monitoring. The package provides 64 digital I/O pins according to the verified C8051F02x datasheet snippet, although exact pin assignments and package details should be confirmed against the manufacturer documentation. Typical uses include industrial measurement and control, data acquisition, sensor-interface systems, analog signal conditioning, and compact embedded instruments. The 100 ksps ADC is suitable for many low-to-moderate-bandwidth acquisition tasks, while the DAC supports programmable analog output in test equipment and control systems. A key design consideration is analog signal integrity. Place ADC inputs, DAC outputs, reference connections, and power pins according to the manufacturer layout guidance, keeping high-current switching paths away from sensitive analog traces and providing appropriate decoupling. The verified web data does not provide complete pinout, operating-temperature, supply-voltage, lifecycle, or compliance values, so those details require confirmation before production release.

Запрос цены Контакты
C8051F126 - 50MHz 8051 MCU, 128KB Flash, 100-TQFP | Silicon Labs
C8051F126

C8051F126 - 50MHz 8051 MCU, 128KB Flash, 100-TQFP | Silicon Labs

The Silicon Labs C8051F126 is a highly integrated mixed-signal 8-bit microcontroller (MCU) featuring a high-performance 8051 core running at 50 MHz peak instruction throughput. This analog-intensive MCU integrates a 10-bit, 8-channel, 100 ksps successive-approximation ADC, a 12-bit, 2-channel DAC, and two on-chip comparators, making it well-suited to closed-loop control and precision sensing applications. The device ships with 128 kB of in-system programmable Flash and 8 kB of RAM, plus five 16-bit timers and multiple serial interfaces, all housed in a 14x14 mm, 100-pin TQFP package. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path; it is widely used for embedded control tasks where deterministic real-time behavior, low power, and rich analog/mixed-signal integration outweigh the need for high-end DSP or MPU performance. The C8051F126 belongs to the mixed-signal MCU category, which extends a baseline 8051 core with precision analog peripherals - placing it in the hierarchy: 8051 core -> 8-bit MCU -> mixed-signal MCU -> microcontroller -> embedded processor -> semiconductor. Key features include the 50 MHz pipelined 8051-compatible core delivering up to 50 MIPS, a true 12-bit (or 10-bit mode) ADC with programmable amplifier gain of 0.5/1/2/4/8/16, two 12-bit DACs, and an internal 2% accurate 24.5 MHz oscillator that can drive the system clock without an external crystal. The part supports up to 64 digital I/O pins (the lower pin-count 64-pin package variants expose 32), tolerates 2.7 V to 3.6 V supply, and operates across the -40 C to +85 C industrial temperature range. Typical applications include industrial process control, optical networking modules, point-of-sale terminals, motor control, smart sensors, and portable instrumentation. The wide operating voltage and rich analog integration allow direct interfacing with sensors, bridge circuits, and actuators without a separate analog front-end IC. When designing with this device, ensure the decoupling network follows the datasheet's recommended 1 nF plus bulk capacitor arrangement and that JTAG/programming pins are reserved for in-system programming. Boundary-scan is not supported - functional test coverage must be designed in.

Запрос цены Контакты
C8051F126-GQR - 50MHz 8051 MCU, 128KB Flash, 100-TQFP | Silicon Labs
C8051F126-GQR

C8051F126-GQR - 50MHz 8051 MCU, 128KB Flash, 100-TQFP | Silicon Labs

The Silicon Labs C8051F126-GQR is a highly integrated mixed-signal 8-bit microcontroller built on the legacy 8051 core, delivering 50 MHz (100 MIPS peak) performance in a 100-pin TQFP (14x14 mm) package. It integrates 128 KB of in-system programmable flash, 8.25 KB RAM, a 10-bit 8-channel 100 ksps ADC, two 12-bit DACs, two comparators, and 64 digital I/O pins, making it a true System-on-a-Chip for embedded analog and control designs. What is a mixed-signal 8051 microcontroller? An 8051 MCU is a single-chip computer based on Intel's classic MCS-51 instruction set, extended over decades with on-chip peripherals, flash, and RAM. Mixed-signal devices add analog peripherals (ADC, DAC, comparators, voltage reference) directly to the digital core, eliminating the need for external converters and shrinking BOM cost. The C8051F126 sits in the broader hierarchy: 8-bit MCU -> 8051 family -> mixed-signal SoC -> embedded controller. It is commonly used as a step-up from discrete analog signal conditioning plus external ADC designs in industrial and instrumentation applications. Compared with a Cortex-M0/M3 device, an 8051 core is slower code-favored only for low-cost portability; the F126's value comes from analog silicon density. Key features include a pipelined 8051 core that executes 70% of instructions in 1-2 system clocks, a 2-cycle 16x16 MAC engine for DSP-style math, programmable gain amplifier (PGA) gain settings of 0.5/1/2/4/8/16 on the ADC inputs, and a data-dependent windowed interrupt for adaptive sampling. Communication interfaces typically span two UARTs, an SMBus-compatible I2C bus, and an SPI bus for external peripherals and controllers. The -GQR suffix indicates a lead-free, RoHS-compliant 100-pin TQFP reel-packaged grade. The original device's supply range is 2.7 V to 3.6 V, and the operating range is -40 C to +85 C. The C8051F2 architecture centers on an analog-friendly pipeline, an on-chip 2.2 V reference, and programmable throughput. The optional on-chip PLL supports up to 480 MHz - higher throughput without speed loss. A 2-cycle 16x16 MAC engine accelerates DSP-style math. These specifications highlight durability for high-throughput DSP-style industrial control. Typical applications span precision data acquisition, process control loops, motor control feedback, optical networking modules, instrumentation front-ends, and embedded control systems. The 64 I/O plus device pins and memory density also enable mid-tier designs with adequate peripheral headroom. When designing with this device, ensure adequate decoupling at the supply pin (10uF bulk) per the digital core. The original code's flash legacy ensures portable migration from discrete silicon designs.

Запрос цены Контакты
C8051F206 - 25MHz 8KB Flash Mixed-Signal MCU | Silicon Labs
C8051F206

C8051F206 - 25MHz 8KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F206 is an 8-bit C8051 mixed-signal microcontroller operating at 25 MHz, with 8 KB of program Flash, 1.25 KB of RAM, a 12-bit ADC, 32 I/O pins, and a 48-pin TQFP package measuring 7 mm by 7 mm. It combines an 8051-compatible processing core with mixed-signal acquisition resources and multiple communication interfaces for compact embedded-control designs. A microcontroller is a programmable integrated circuit that executes embedded software, reads inputs, controls outputs, and manages system timing. The C8051F206 belongs to the C8051F2xx family of 8-bit MCUs and occupies the MCU hierarchy above the processor core while integrating Flash memory, RAM, analog-to-digital conversion, timers, and serial communications on one package. The supplied data identifies 25 MIPS performance, 8 kB Flash, 1.25 kB RAM, a 12-bit ADC, 32 I/O pins, three 16-bit timers, and a 2.7 V to 3.6 V supply range. Its 48-TQFP package provides more external connections than smaller 32-pin devices, supporting projects that need parallel digital I/O alongside analog measurement and serial communications. The package is surface-mount technology, but dimensions, pin assignments, and thermal details beyond the supplied 7 mm by 7 mm indication remain to be confirmed from the manufacturer documentation. Technically, the part combines an 8051 core with mixed-signal peripherals. The 12-bit ADC suits sensor acquisition, while the three 16-bit timers support timing, pulse measurement, and periodic control tasks. The 8 KB Flash limits firmware complexity, so code size, boot code, library size, and update requirements should be checked early. The 25 MHz maximum clock supports faster control-loop and communication handling than lower-speed members of the same family, provided the firmware and peripherals remain within documented timing limits. Typical uses include industrial sensor controllers, compact data-acquisition modules, embedded instrumentation, communications equipment, and general mixed-signal control boards. A design can place analog sensing and digital control in one device, reducing the need for a separate ADC or controller when the 32 available I/O pins and specified RAM are sufficient. Design planning should begin with the manufacturer's datasheet rather than distributor summaries. Confirm the exact 48-pin assignments, exposed versus non-exposed thermal arrangements, oscillator requirements, reset behavior, ADC reference limits, and peripheral multiplexing. Because Flash and RAM are modest for many contemporary workloads, prototype firmware should be compiled early and measured for code and data-memory margins. This page combines verified distributor specifications, source links, application guidance, and replacement-screening criteria. It also distinguishes confirmed values from missing parameters, avoiding unsupported electrical claims while highlighting where a PCB or firmware revision may be required before substitution.

Запрос цены Контакты
C8051F220 - 25MHz 8KB Flash 8051 MCU | Silicon Labs
C8051F220

C8051F220 - 25MHz 8KB Flash 8051 MCU | Silicon Labs

The Silicon Labs C8051F220 is an 8-bit C8051F2xx mixed-signal microcontroller with a 25 MHz maximum clock, 8 KB of ISP flash memory, and a 48-pin TQFP package. It combines an 8-bit 8051-compatible core with an integrated 8-bit ADC, programmable analog gain, multiple timers, UART, and mixed-signal peripherals for embedded control and measurement designs. A microcontroller is a programmable integrated circuit that executes firmware, reads inputs, controls outputs, and manages embedded-system timing. The C8051F2xx family belongs to the broader 8-bit MCU hierarchy and is intended for applications requiring mixed-signal measurement, serial communication, and compact control functions without a larger external processor. Verified device features include 8 KB flash organized as 8K x 8, 32 external ADC inputs, programmable ADC throughput up to 100 ksps, and programmable amplifier gains of 0.5, 1, 2, 4, 8, and 16. The ADC has a reported ±1/2 LSB integral nonlinearity figure and no missing codes in the supplied product description. The C8051F220 is identified as an 8051 C8051F2xx MCU with an 8-bit data bus and a maximum clock of 25 MHz in the distributor records. Its 48-TQFP package provides a surface-mount implementation with 7 x 7 mm dimensions as listed by DigiKey. The supplied sources do not provide a verified manufacturer ordering-code suffix or complete pin-level electrical table. Typical applications include industrial sensor acquisition, temperature and process measurement, digital control panels, low-speed serial equipment, embedded instrumentation, and compact mixed-signal control systems. The ADC and programmable gain make the device useful for analog front ends where multiple inputs must be scanned rapidly. When designing around the C8051F220, confirm the exact package variant, oscillator requirements, supply voltage, programming interface, and ADC reference arrangement against the selected ordering code and manufacturer documentation. Do not infer missing specifications from similarly named C8051F2xx devices.

Запрос цены Контакты
C8051F221 - 8-Bit 25MHz Mixed-Signal MCU | Silicon Labs
C8051F221

C8051F221 - 8-Bit 25MHz Mixed-Signal MCU | Silicon Labs

Silicon Labs C8051F221 is an 8-bit C8051F2xx mixed-signal microcontroller operating up to 25 MHz, with 8 KB of Flash memory, 256 bytes of RAM, and analog conversion and comparator resources integrated in a 32-LQFP 7 x 7 mm package. Its 2.7 V to 3.6 V supply range makes it suitable for low-voltage embedded control systems that require more capability than a basic 8-bit controller. A microcontroller is a programmable semiconductor that integrates a CPU, memory, digital I/O, and peripherals on one chip. The 8051 instruction set and embedded-control architecture place this device within the microcontroller hierarchy: C8051F2xx family -> 8051-compatible MCU -> mixed-signal microcontroller -> embedded processor -> semiconductor. Mixed-signal MCUs combine digital control with analog measurement or comparison functions, reducing the number of discrete components required in instrumentation and control products. The C8051F221 provides an 8-bit ADC with a 22-channel input multiplexer. Port I/O can be assigned as ADC inputs during operation, while the analog section supports throughput up to 100 ksps. The integrated analog peripherals make the MCU useful for sensor acquisition, threshold detection, process monitoring, and compact industrial control panels. The supplied search data identifies 25 MIPS performance, 8 kB of ISP Flash, and an 8-bit ADC, while another result lists 256 x 8 RAM organization. Communication and programming are supported through the C8051F2xx mixed-signal platform and ISP-oriented Flash. ISP capability lets a production or field-update workflow program Flash without a separate programming socket, provided the board exposes the required programming interface and supports the associated operating procedure. Designers should consult the manufacturer datasheet for exact ISP pin requirements, clock limits, and reset behavior before laying out a programming connector. The 32-LQFP package exposes digital I/O and analog inputs while supporting compact surface-mount assembly. Its 7 x 7 mm body is larger than the smallest leadless packages but easier to inspect and solder than a very fine-pitch BGA. Adequate soldermask-defined land patterns, thermal vias where appropriate, and clean supply decoupling are necessary for reliable production assembly. Typical applications include industrial process measurement, environmental sensor interfaces, digital potentiometer and threshold-control systems, panel controls, and compact embedded instruments. When selecting the MCU, verify that the required I/O count, ADC input assignment, programming method, memory footprint, and 2.7 V to 3.6 V power supply match the complete board architecture. This page consolidates verified distributor specifications, package information, analog-feature details, application guidance, and drop-in comparison data. It also distinguishes confirmed values from specifications that require confirmation in the manufacturer datasheet, helping engineers make faster sourcing and design decisions without relying on generic microcontroller assumptions.

Запрос цены Контакты
C8051F226 - 25MHz 8KB Mixed-Signal MCU | Silicon Labs
C8051F226

C8051F226 - 25MHz 8KB Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F226 is an 8-bit mixed-signal microcontroller operating at 25MHz, with 8KB of flash program memory, 1.25KB of RAM, a 32-channel 8-bit ADC, and a 48-pin TQFP package measuring 7x7mm. Its 8051 core executes up to 25 MIPS, while integrated analog and timing peripherals support embedded measurement, control, and communication designs. A mixed-signal MCU is a microcontroller that combines a digital processor core with analog and timing functions on one integrated circuit. In the broader semiconductor hierarchy, this C8051 device belongs to the microcontroller class and provides sensing, control, communications, and programmable I/O in a single package. It is positioned between simple 8-bit control devices and higher-performance 32-bit embedded processors. Verified device features include 8KB of ISP flash, 1.25KB of RAM, 32 I/O lines, an 8-bit ADC with 32 channels and configurable throughput up to 100ksps, two comparators, three 16-bit timers, and a 25MHz maximum clock. The ADC is reported as a 32-channel mixed-signal peripheral, with port I/O configurable as analog inputs. Exact voltage, temperature, package marking, and interface details must be confirmed in the manufacturer datasheet before design release. The C8051F226 is useful when a compact 8-bit controller needs both digital control and on-chip analog measurement. Its 8051 instruction set and peripheral set suit embedded control, industrial sensing, instrumentation, and communication-oriented embedded products. The 48-TQFP package provides a conventional pin-count-compatible platform for external memory, bus, and peripheral connections where the specific pin functions are confirmed from the datasheet. A replacement should not be selected from the MPN name alone. Verify the exact package, pinout, memory map, oscillator requirements, ADC characteristics, peripheral assignments, and software compatibility. The provided cross-reference search identifies C8051F005-GQ as a comparison item, but the available evidence does not establish that it is pin-to-pin compatible or a drop-in replacement for C8051F226.

Запрос цены Контакты
C8051F230 - 25MHz 8-Bit Flash MCU | Silicon Labs
C8051F230

C8051F230 - 25MHz 8-Bit Flash MCU | Silicon Labs

The Silicon Labs C8051F230 is an 8-bit C8051F2xx mixed-signal microcontroller operating at 25 MHz with 8 KB of Flash memory and housed in a 48-pin TQFP (7x7 mm) package. According to the verified distributor data, the device provides an 8-bit architecture, 25 MHz performance, and 8 KB of programmable Flash. The C8051F230 family is positioned for embedded control applications requiring an 8051-compatible core, mixed-signal peripherals, and in-system programming support. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one package. The C8051F230 belongs to the C8051F2xx family and is an 8-bit MCU, meaning its internal data path and instruction set operate on 8-bit values. Its 25 MHz clock provides the timing basis for executing firmware and controlling external hardware, while the 8 KB Flash memory stores program code. This device is distinct from a general-purpose microprocessor because it also incorporates embedded-system peripherals and digital I/O. The verified C8051F230 information identifies the part as a highly integrated mixed-signal 8-bit MCU. The family also includes communication and timing resources referenced in the cross-reference data, including SPI, UART, and three 16-bit timers. The 48-TQFP package exposes the device's I/O and mixed-signal connections through a relatively high pin count, making it suitable for prototypes and embedded industrial or control designs that need more external connectivity than a small-package MCU. C8051F230 is primarily suited to embedded control, data acquisition, communication, and low-to-medium-speed automation. Its 8-bit architecture can handle digital control, sensor conditioning, actuator control, and communication tasks when firmware requirements do not demand a high-performance 32-bit processor. The mixed-signal positioning is useful when a design must combine digital control with analog or sensor-related functions, although exact ADC, DAC, timer, and electrical details must be confirmed in the manufacturer documentation before final design release. Designers should preserve the 48-TQFP footprint, verify pin multiplexing, and confirm the device-specific oscillator, reset, programming, and peripheral requirements against the manufacturer datasheet. Software compatibility must also be checked because a family-compatible MCU can differ in memory size, peripheral availability, and package pin assignment. The provided verified data supports the 25 MHz core speed, 8-bit architecture, 8 KB Flash memory, and 48-pin TQFP package, but does not provide a complete electrical timing or pin-function table. This product page combines verified distributor specifications, package information, lifecycle caveat handling, comparison fields, and engineering-oriented design guidance. It is intended to support initial component selection and sourcing review, while final procurement and firmware deployment should use the latest manufacturer datasheet and authorized distributor inventory data as of 2026-10-23.

Запрос цены Контакты
C8051F231 - 25MHz 8KB Flash 32-LQFP MCU | Silicon Labs
C8051F231

C8051F231 - 25MHz 8KB Flash 32-LQFP MCU | Silicon Labs

The Silicon Labs C8051F231 is a 25 MHz, 8-bit mixed-signal microcontroller with 8 KB of ISP Flash, 256 bytes of RAM, 22 I/O pins, and a 32-LQFP 7 mm × 7 mm package. It operates from a 2.7 V to 3.6 V supply. According to the available datasheet summaries, the device combines an 8051-compatible core with mixed-signal peripherals and on-chip debug support. A microcontroller is a programmable integrated circuit that integrates a CPU core, memory, I/O ports, timers, serial interfaces, and analog or mixed-signal peripherals on one package. Within the semiconductor hierarchy, the C8051F231 belongs to the 8-bit microcontroller and embedded-processing categories. Its 8 KB Flash stores firmware, while its 256-byte RAM supports working variables, stack operations, and short-lived control data. The C8051F231 provides 22 I/O pins, a 25 MHz clock, two comparators with programmable hysteresis, configurable comparator interrupts or reset behavior, a VDD monitor, and a brown-out detector. Its on-chip JTAG debug circuit supports full-speed, non-intrusive in-system debugging without an external emulator, which can shorten firmware bring-up and board validation. These features make it useful where compact mixed-signal control is required. The C8051F231 is positioned for embedded control, sensor acquisition, industrial monitoring, and low-cost peripheral control. Its 2.7 V to 3.6 V operating range suits systems using regulated 3.3 V rails, while the 32-LQFP package provides a conventional surface-mount footprint for PCB assembly. Compared with larger microcontrollers, its 8 KB Flash and 256-byte RAM constrain application size, so firmware budgeting and peripheral sharing are important. For analog signal conditioning, the integrated comparators can monitor thresholds and cooperate with the VDD monitor and brown-out detector. The brown-out detector helps supervise the supply, while the VDD monitor supports power-related detection. Exact threshold, timing, and electrical limits should be confirmed from the manufacturer datasheet before production release. The principal design consideration is resource planning. Allocate Flash and RAM before adding libraries, and avoid assuming that a general-purpose 8051 replacement will preserve firmware timing, startup behavior, or peripheral compatibility. Validate the pin multiplexing, interrupt vectors, clock configuration, debug interface, and mixed-signal routing on the assembled PCB. This product data synthesizes verified distributor listings, package information, memory and clock specifications, and practical design guidance. It is intended as an engineering starting point, not as a substitute for the complete Silicon Labs datasheet, errata, or application-specific validation.

Запрос цены Контакты
C8051F236 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
C8051F236

C8051F236 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F236 is a mixed-signal 8-bit microcontroller with a 25 MIPS C8051 core, 8 kB of Flash memory, 1.25 kB of RAM, three 16-bit timers, and integrated analog peripherals in a 48-pin QFP package. Its combination of digital control and on-chip mixed-signal resources supports compact embedded measurement, control, and communications designs. A microcontroller is an integrated semiconductor containing a processor core, memory, and peripherals such as timers, serial interfaces, analog converters, comparators, and interrupt controls. In the system hierarchy, the C8051F236 belongs to the 8-bit microcontroller class, combines a digital processor with analog functions, and is used as the control and measurement hub of an embedded system. Key features include up to 25 MIPS performance, 8 kB of ISP Flash, 1.25 kB of RAM, three 16-bit timers, two comparators with programmable hysteresis, a VDD monitor with brown-out detection, and on-chip JTAG debug circuitry. The integrated analog and timing resources can reduce the need for external components while simplifying firmware-driven measurement and control. The C8051F236 uses an 8-bit C8051 architecture with an integrated mixed-signal feature set. Its three 16-bit timers support timing, event counting, and periodic control functions. The two comparators can generate interrupts or resets, while the VDD monitor helps supervise the supply. On-chip JTAG debug supports full-speed, non-intrusive in-system debugging without a separate emulator. Typical applications include industrial sensor conditioning, data acquisition modules, small motor and actuator controllers, embedded instrumentation, and low-cost control systems where analog monitoring and precise timing are required. The 48-pin QFP package provides a conventional surface-mount format, although the QFP footprint is generally larger than modern compact packages. When designing a board, preserve the required power, clock, reset, programming, and ground connections according to the manufacturer datasheet. Provide local decoupling near the supply pins and route programming and debug signals away from noisy analog inputs. Verify the exact pin names, voltage limits, and peripheral multiplexing before final PCB release because those details are not included in the supplied web excerpts. This page consolidates verified C8051F236 specifications, distributor references, package information, and design guidance into a compact engineering reference. It also distinguishes verified facts from missing datasheet parameters and avoids presenting unverified alternatives as drop-in replacements.

Запрос цены Контакты
C8051F330-GM - 25MHz Mixed-Signal MCU | Silicon Labs
C8051F330-GM

C8051F330-GM - 25MHz Mixed-Signal MCU | Silicon Labs

Silicon Labs C8051F330-GM is a mixed-signal 8-bit microcontroller with a 25 MHz 8051-compatible core, 8 kB Flash memory, 0.75 kB RAM, and communication peripherals including I2C, SPI, and UART. It is packaged in a 20-pin QFN, identified by DigiKey as 20-MLP (4x4). The device is designed for compact embedded control systems that require integrated mixed-signal processing, serial connectivity, and multiple timer resources in a small surface-mount footprint. A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripherals, and input/output functions on one integrated circuit. In the broader electronics hierarchy, the C8051F330-GM belongs to the 8-bit MCU category, integrates digital control with analog and communication functions, and is used as the central controller in embedded products. Its mixed-signal architecture allows software to coordinate sensing, timing, serial data transfer, and external control functions without requiring several separate discrete components. Key features include 25 MHz performance, 8 kB of Flash, 0.75 kB of RAM, four 16-bit timers, I2C, SPI, UART, and 21 I/O ports as reported in the verified distributor data. The MCU is designed for applications that need more peripheral integration than a basic general-purpose logic controller while retaining the simplicity of an 8-bit architecture. Its compact 4 mm by 4 mm package supports space-constrained boards and high-density embedded equipment. The manufacturer describes the device as a highly integrated mixed-signal 8-bit MCU and identifies its core as a pipelined 8051-compatible architecture capable of up to 25 MIPS in the family documentation. The available verified information specifies a 2.7 V to 3.6 V supply range for this device in one distributor result, while detailed timing, ADC, comparator, oscillator, and electrical characteristics remain dependent on the manufacturer datasheet and must be confirmed before design release. Typical applications include compact sensor controllers, industrial monitoring equipment, consumer accessories, communication modules, and low-power embedded control boards. I2C and SPI support can simplify connection to sensors, displays, memory, and digital peripherals, while the four 16-bit timers are useful for periodic sampling, timing, motor-control sequencing, or pulse-width-related tasks. The small package makes the device suitable for designs where board area is limited. Designers should confirm the exact pin functions, exposed-pad connection, recommended decoupling, clock configuration, programming method, and mixed-signal layout requirements from the official C8051F33x datasheet. Because this is a mixed-signal MCU, analog and digital return paths, power distribution, and exposed-pad thermal treatment should be planned with the same care used for precision analog circuitry. This page consolidates the verified distributor and manufacturer specifications, explains the role of the C8051F330-GM in embedded mixed-signal systems, and separates confirmed values from parameters that require datasheet review before production design.

Запрос цены Контакты
C8051F340-GQ - 8-Bit 48 MHz USB MCU | Silicon Labs
C8051F340-GQ

C8051F340-GQ - 8-Bit 48 MHz USB MCU | Silicon Labs

The Silicon Labs C8051F340-GQ is an 8-bit C8051F34x mixed-signal microcontroller with a 48 MHz maximum clock, 64 KB of Flash program memory, 4.25 KB of RAM, and USB 2.0 connectivity, housed in a 48-pin TQFP package measuring 7 x 7 mm. Its integrated USB controller includes a transceiver and on-chip clock recovery, allowing USB applications without external resistors, crystal, voltage regulator, EEPROM, or other USB interface components. A microcontroller is a programmable integrated circuit containing a CPU core, memory, peripherals, and input/output interfaces. The C8051F34x belongs to the 8051 microcontroller family and combines digital control with mixed-signal measurement functions. Its 8-bit data bus supports embedded control, while the high-speed C8051F34x core executes firmware for protocol handling, data acquisition, and device control. Key features include a 10-bit, 20-channel ADC operating to 200 ksps, a voltage reference, two comparators, an internal temperature sensor, a watchdog timer, an internal oscillator, a power-on reset, a VDD monitor, and an integrated voltage regulator. The USB 2.0 function controller supports direct USB-connected products, while 5 V-tolerant port I/O and RST inputs support mixed-voltage external interfaces. The device combines an 8051-compatible control core with integrated analog peripherals, reducing external component count in USB instrumentation, data acquisition, human-interface, and embedded control systems. Its 64 KB Flash memory provides room for application firmware and USB code, while 4.25 KB RAM supports working data and stack operations. The integrated analog block enables sensor reading, threshold detection, and control functions without a separate ADC. Typical applications include USB-connected test equipment, measurement instruments, data-acquisition modules, industrial control products, and embedded USB peripherals. The 48 MHz clock specification is listed by DigiKey, while Mouser describes the part as a 50 MHz 8-bit MCU; engineers should verify the exact operating conditions and clock configuration in the manufacturer datasheet before design release. The principal design consideration is package and power planning. This exact orderable suffix uses the 48-pin TQFP footprint, and the manufacturer documents other C8051F34x devices in 32-pin LQFP or QFN packages. USB routing, analog-reference grounding, decoupling, and crystal or clock selection must be planned according to the manufacturer’s recommended layout and USB application requirements. This page combines the verified manufacturer feature summary, package information, distributor listings, and cross-reference evidence into a practical component-selection record. It also distinguishes verified drop-in evidence from family variants and highlights where a replacement requires pinout, firmware, memory, and peripheral verification before approval.

Запрос цены Контакты
C8051F506-IM - 50MHz 8051 32KB Flash Automotive MCU | Silicon Labs
C8051F506-IM

C8051F506-IM - 50MHz 8051 32KB Flash Automotive MCU | Silicon Labs

The Silicon Labs C8051F506-IM is an 8-bit 8051-core mixed-signal microcontroller running at 50 MHz, integrating 32 KB of in-system programmable Flash and 4.25 KB of RAM in a 32-pin QFN (5x5 mm) package. It is AEC-Q100 qualified for automotive and industrial use, supports an extended operating temperature range up to +125 °C, and operates from a 1.8 V to 5.25 V supply. According to the Silicon Labs product page, the device is positioned as a highly integrated automotive and industrial MCU with integrated communication interfaces including CAN and LIN. An 8051 microcontroller is a Harvard-architecture 8-bit CPU originally introduced by Intel in 1980 and now widely licensed and extended by Silicon Labs (formerly Cygnal), Nuvoton, and others. The C8051F50x family belongs to the broader Mixed-Signal ISP Flash MCU Family - a hypernym hierarchy that places it under 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. Modern 8051 cores from Silicon Labs achieve up to 50 MIPS throughput and integrate analog peripherals such as ADC, DAC, comparators, voltage references, and communication controllers onto a single die, eliminating external analog components. Key features of the C8051F506-IM include 32 KB (32K x 8) Flash, 4.25 KB RAM (256 bytes standard + 4 KB AUX RAM), a 12-bit ADC with up to 25 channels, an on-chip temperature sensor, two analog comparators, integrated CAN 2.0B and LIN 2.1 controllers, and 25 digital I/O lines. The 50 MHz core delivers 50 MIPS instruction throughput, making it suitable for real-time control loops. On-chip oscillators (24 MHz internal) eliminate external crystals in many designs. Typical applications include automotive body controllers and sensor nodes, LIN/CAN-connected ECUs, industrial CANopen or DeviceNet slaves, brushless DC motor control, and low-power sensor hubs. The AEC-Q100 grade and 125 °C capability let designers deploy the same firmware into under-hood and cabin environments. The wide 1.8 V-5.25 V supply range also enables direct connection to Li-ion or 3.3 V digital rails without level shifters. When designing with the C8051F506-IM, place the bypass capacitors (one 0.1 µF plus one 4.7 µF bulk) within 5 mm of the VDD pin to minimize digital switching noise on the analog reference. For automotive applications, follow the Silicon Labs EMC guidelines for CAN bus termination (typically 120 Ω split termination) and route LIN bus traces away from switching nodes. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes that go beyond what is in the manufacturer datasheet, helping engineers shorten evaluation cycles and make informed replacement decisions.

Запрос цены Контакты
CC3220SF12ARGKR - SimpleLink Wi-Fi MCU, 1MB Flash, 256kB RAM | Texas Instruments
CC3220SF12ARGKR

CC3220SF12ARGKR - SimpleLink Wi-Fi MCU, 1MB Flash, 256kB RAM | Texas Instruments

The Texas Instruments CC3220SF12ARGKR is a SimpleLink 32-bit Arm Cortex-M4 Wi-Fi wireless microcontroller SoC with 1MB of internal Flash and 256kB of RAM, offered in a 64-pin VQFN (RGK) package with exposed thermal pad. It integrates an RF transceiver supporting IEEE 802.11 b/g/n at 2.4 GHz with 18 dBm transmit power output and -96 dBm receive sensitivity, alongside an applications Cortex-M4 MCU that runs user application code directly on-die. The part is the highest-memory variant of the three-member CC3220x family, distinguished by its dedicated 1MB user Flash. A SimpleLink Wi-Fi wireless MCU is a single-chip solution that combines an industry-standard microcontroller core with a Wi-Fi network processor, offloading the complex 802.11 MAC/PHY stack so the host MCU can focus on application logic. The CC3220x family sits within TI's broader SimpleLink MCU platform, which also includes low-energy Bluetooth, Sub-1 GHz, and host MCUs that share a common SDK and toolchain. The network processor subsystem includes its own ARM Cortex-M3 dedicated to Wi-Fi, hardware crypto engines, and a TCP/IP stack, allowing the application Cortex-M4 to wake only when needed for ultra-low-power IoT operation. Key features include integrated Wi-Fi security with hardware-accelerated WPA2 and WPA3, 27 GPIO pins, and a rich serial peripheral set including ADC, I2C, SPI, UART, and PCM interfaces. The wide supply range of 2.1V to 3.6V supports direct connection to a single Li-ion cell or 3.3V regulated rail. The CC3220SF12ARGKR is the SF (Secure Flash) variant with 1MB user Flash, building on the CC3220S's MCU-level file-system encryption, secure boot, and debug security, and the CC3220R's IoT networking security and device identity/keys. Architecturally, the CC3220SF separates the Wi-Fi network processor from the user application MCU, allowing independent firmware updates for each subsystem. The integrated hardware crypto block accelerates AES, SHA, and TLS handshake operations, offloading the application MCU. This makes it well-suited for cloud-connected IoT nodes where TLS handshake latency and power budget are critical. Typical applications include cloud-connected home automation gateways, industrial IoT sensor nodes reporting over MQTT, Wi-Fi-enabled medical telemetry devices, smart appliances with Over-The-Air update capability, and asset tracking beacons. The 1MB Flash supports richer application code than the CC3220S variant. When designing with this device, carefully follow TI's layout guidelines for the RF section, paying particular attention to the 50-ohm antenna trace impedance and ground plane stitching. The CC3220SF includes a 4-wire JTAG debug interface; ensure the debugger reset line is correctly pulled during flash programming to avoid bricking. This page synthesizes distributor pricing, drop-in CC3220x family alternatives, and practical design considerations not found in a quick scan of the manufacturer datasheet.

Запрос цены Контакты
CH32V203C8T6 - 144MHz RISC-V MCU, 64KB Flash, USB/CAN, LQFP-48 | WCH
CH32V203C8T6

CH32V203C8T6 - 144MHz RISC-V MCU, 64KB Flash, USB/CAN, LQFP-48 | WCH

The WCH (Nanjing Qinheng) CH32V203C8T6 is an industrial-grade, enhanced low-power 32-bit RISC-V microcontroller operating up to 144 MHz with 64 KB Flash and 20 KB SRAM, housed in a 48-pin LQFP package. The CH32V203C8T6 integrates dual USB (Host + Device) controllers, one CAN 2.0B interface, USB type-C PD support, and 12-bit ADC, making it well suited to industrial control, USB peripherals, and motor-control applications. What is an MCU? A microcontroller unit (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripheral interfaces (ADC, timers, communication buses). In the power-management hierarchy, an MCU sits above the power supply and below the application firmware; in taxonomy terms, it belongs to the class microcontrollers -> 32-bit MCUs -> RISC-V MCUs -> industrial-grade general-purpose MCUs. The RISC-V ISA is an open, royalty-free instruction-set architecture, in contrast to closed ISAs such as ARM Cortex-M, allowing WCH to deliver cost-optimized silicon. Key features include up to 64 KB on-chip program memory, 20 KB SRAM, an enhanced I/O port structure, a 12-bit ADC, and a low-power Run mode of approximately 49.3 uA/MHz. The CH32V203C8T6 supports both USB Host and USB Device roles simultaneously and adds a CAN 2.0B interface for industrial networking, with USB Type-C PD 3.0 negotiation support. Architecturally, the CH32V203C8T6 uses a 32-bit RISC-V core with separate instruction and data buses that can operate in parallel with DMA, reducing CPU load during high-throughput peripheral transactions. Multi-bus synchronous operation enables deterministic latency for time-critical USB and CAN traffic. Typical applications include industrial USB-to-CAN bridges, USB HID devices, USB type-C PD chargers, low-power sensor nodes, and consumer peripherals. The combination of dual-role USB and CAN is rare at this price point, simplifying BOMs for industrial gateways. When designing with the CH32V203C8T6, ensure the USB pins are routed with 90-ohm differential impedance and that the LQFP-48 thermal pad (if any) is soldered for power dissipation. Decouple each VDD pin with a 100-nF ceramic capacitor placed within 2 mm of the pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты
COP8SAC720M8 - 8-Bit 10MHz OTP MCU 4KB | Texas Instruments
COP8SAC720M8

COP8SAC720M8 - 8-Bit 10MHz OTP MCU 4KB | Texas Instruments

The Texas Instruments COP8SAC720M8 is an 8-bit CMOS ROM-based and One-Time Programmable (OTP) microcontroller belonging to the COP8™ 8SA family, operating at up to 10 MHz with 4KB (4K x 8) of program memory and 128 bytes of RAM, packaged in a 20-pin SOIC Wide (7.50 mm). The MIC 555 timer companion ecosystem is unrelated. Key features include 16 digital I/O pins, an integrated power-on-reset (POR) circuit, and a low-pin-count 20-SOIC footprint aimed at very small package applications. Background: An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, RAM, peripherals, and I/O on one silicon die. The COP8 (Controller Oriented Processor 8-bit) is Texas Instruments' CISC 8-bit architecture featuring a register-based design optimized for embedded control. OTP microcontrollers ship with one-time-programmable memory, allowing low-volume custom firmware for cost-sensitive and secure applications where code flexibility is sacrificed for unit price. Key features include 4KB (4K x 8) OTP program memory, 128 x 8 RAM, 16 I/O lines, on-chip Power-On-Reset eliminating external reset circuitry, and an integrated oscillator. The 20-pin SOIC Wide (0.295 inch / 7.50 mm body) gives the part MIC 0603-style PCB handling ease for through-hole-style hand-soldering and inspection, while still being surface-mount. Technical depth: The COP8SA family uses a CISC Harvard-like architecture with separate program and data spaces, a multi-source interrupt controller, and on-chip peripherals including timers and a watchdog timer. The 10 MHz clock yields ~1 µs instruction cycle, suitable for slow control tasks, sensor signal conditioning, and human-interface key-driven panels. Operating voltage spans 2.7V to 5.5V. Typical applications include white goods and HVAC control modules, simple sensor signal conditioning, low-cost consumer keypads, and industrial pushbutton interface boards. The MIC 5150 family of hot-swap controllers is unrelated to this MCU. This part is suited where code size below 4KB suffices and BOM cost is critical. Design consideration: Because this part is OTP, firmware cannot be field-updated. For prototypes or low-volume runs, choose FLASH-based parts like ATMEGA48A-AU. Always verify the LTB voltage drop tolerance before substituting. The COP8SAC7D2 should not be confused with this MPN (M7D2 suffix differs). This page synthesizes distributor pricing, lifecycle status, package detail, and drop-in alternatives not found on the manufacturer datasheet alone, providing an integrated resource for engineers sourcing the COP8SAC720M8.

Запрос цены Контакты
COP8SAC720M8/NOPB - 8-bit 10MHz 4KB OTP MCU | Texas Instruments
COP8SAC720M8/NOPB

COP8SAC720M8/NOPB - 8-bit 10MHz 4KB OTP MCU | Texas Instruments

The Texas Instruments COP8SAC720M8/NOPB is an 8-bit CMOS microcontroller from the COP8 family (8SA sub-series) featuring 4KB of One-Time Programmable (OTP) program memory, 128 bytes of RAM, and 16 digital I/O lines, housed in a 20-pin SOIC (0.295" / 7.50mm width) package. It runs at 10MHz from a single 3.3V or 5V supply, integrates power-on reset (POR), and provides a very small form factor for space-constrained applications. The /NOPB suffix designates a lead-free, RoHS-compliant shipping version. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (ROM/Flash/OTP), data memory (RAM), and programmable I/O peripherals on one IC. OTP microcontrollers ship blank and are programmed once by the OEM or via a programming socket before deployment - ideal for low-cost, medium-volume production where mask-ROM NRE charges are not justified. The COP8 core uses a CISC instruction set optimized for byte-level bit manipulation, common in white-goods and appliance control. Key features of the COP8SAC720M8/NOPB include 4KB (4K x 8) OTP program memory, 128 x 8 RAM, an integrated power-on reset circuit that holds the CPU in reset until VDD stabilizes, 16 general-purpose I/O pins multiplexed with peripheral functions, a programmable watchdog timer, and an 8-bit timer/counter. The 10MHz clock supports instruction-cycle execution in the 200ns range, sufficient for slow loop-control and user-interface scanning tasks. Typical applications for the COP8SAC720M8/NOPB include white-goods controllers (washing machines, dishwashers, microwave ovens), HVAC thermostats, low-end remote controls, simple sensor read-out boards, and replacement of discrete 8-bit logic in legacy product lines. Its 20-SOIC footprint and wide operating voltage range make retrofit into existing COP8-based designs straightforward. When designing with this part, note that OTP programming requires a special programmer or gang programmer prior to solder; firmware cannot be updated in the field. The part is RoHS-compliant (lead-free /NOPB suffix) per the addressable manufacturing data. Programming model and peripheral registers follow the COP8 architecture reference - consult the manufacturer datasheet for the full register map, interrupt vector table, and timing diagrams before prototyping.

Запрос цены Контакты
COP8SAC720M8X/NOPB - 8-Bit 10MHz 4KB OTP MCU | Texas Instruments
COP8SAC720M8X/NOPB

COP8SAC720M8X/NOPB - 8-Bit 10MHz 4KB OTP MCU | Texas Instruments

The Texas Instruments COP8SAC720M8X/NOPB is an 8-bit CMOS ROM-based and One-Time Programmable (OTP) microcontroller from the COP8™ 8SA family, delivering 10 MHz CPU performance with 4 KB of program memory and 128 bytes of RAM in a 20-pin SOIC package. Per the manufacturer datasheet, this device integrates power-on reset, low-EMI oscillator design, and very small packaging, making it suited for cost-sensitive embedded applications requiring reliable one-time-programmable code storage. The COP8 (Controller Oriented Processor) family is a mature 8-bit CISC architecture originated by National Semiconductor and now maintained by Texas Instruments. COP8 microcontrollers are accumulator-based Harvard-architecture devices featuring a rich instruction set, multiple addressing modes, and integrated peripherals such as timers, A/D converters, and serial interfaces. They are widely deployed in white-goods, appliance, industrial-control, and consumer-electronics applications where deterministic behavior, low EMI, and OTP-based code security are valued. The COP8SAC720M8X/NOPB is the OTP variant of the COP8SA family, intended for prototyping and low-to-medium volume production. Key features include 16 GPIO pins, an 8-bit accumulator-based CPU core, on-chip power-on reset eliminating external reset circuitry, and a wide operating voltage range of 2.7 V to 5.5 V. The 20-SOIC package measures 7.50 mm in body width, and the device operates over the industrial -40 °C to +85 °C temperature range. The integrated oscillator with low-EMI feature reduces electromagnetic emissions in noise-sensitive applications. The COP8SAC720M8X/NOPB is pin-compatible with other COP8SA family members including COP8SAB720M8 and COP8SAC744M8, enabling designers to migrate between memory sizes without PCB rework. It supports in-system programming via TI's development toolchain and is supported by the COP8-ICE emulator. According to the manufacturer datasheet, the device includes a multi-source interrupt controller, two 16-bit timers, and a UART-compatible serial port. Typical applications include appliance control boards, HVAC thermostat controllers, security alarm panels, battery charger control, and small home-automation sensor nodes. The OTP memory provides one-time programmability for low-volume or secure code storage, eliminating the need for external EEPROM in many designs. When designing with this part, ensure the OTP programming voltage and timing requirements are observed during code development. The COP8 instruction set is non-standard, so engineers must use the TI COP8 assembler and toolchain for code development.

Запрос цены Контакты
CP80C88-2Z - 80C88 8MHz CMOS CPU 40-PDIP | Renesas/Intersil
CP80C88-2Z

CP80C88-2Z - 80C88 8MHz CMOS CPU 40-PDIP | Renesas/Intersil

The Renesas/Intersil CP80C88-2Z is an 8/16-bit CMOS microprocessor (CPU) from the 80C88 family operating at 8 MHz from a single 5 V supply, housed in a 40-pin PDIP (0.600 in / 15.24 mm) through-hole package. It is a drop-in CMOS successor to the NMOS 8088, executing the same x86 real-mode instruction set while dramatically reducing power consumption. A microprocessor (MPU) is the central processing unit of a computer system: it fetches instructions from memory, decodes them, and executes arithmetic, logic, and I/O operations. The 80C88 sits within the x86 processor hierarchy (8086 -> 8088 -> 80C88 -> 80186/80286), making it software-compatible with the vast ecosystem of 8086/8088 code, BIOS implementations, and peripherals such as the 8284 clock generator and 8288 bus controller. Key features of the CP80C88-2Z include an 8 MHz maximum clock frequency, a multiplexed 8-bit external data bus with a 16-bit internal architecture, a 20-bit address bus addressing up to 1 MB of memory, and two operating modes: MINimum mode for small single-processor systems and MAXimum mode for larger multiprocessor applications. CMOS fabrication (self-aligned silicon gate, scaled SAJI IV process) gives it far lower static and dynamic power draw than the original NMOS 8088. Technically, the device uses a prefetch queue and bus interface unit separated from the execution unit, allowing instruction fetch and execution to overlap. The 2 suffix denotes the 8 MHz speed grade, and the Z suffix denotes lead-free, RoHS-compliant construction. Compatible support chips (8284A, 8288, 8259A, 8237A) allow a full board-level system design. Typical applications include legacy industrial control systems, embedded x86 single-board computers, avionics and test-equipment maintenance, and educational/retro-computing platforms that require authentic 8088 bus timing. Design consideration: use the 8284A clock generator for a properly phased CLK signal, and ensure READY-based wait states for slow EPROM/EEPROM memories; do not exceed the 5 V +/-10% supply range. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

Запрос цены Контакты