AD977AN vs AD977ANZ Сравнение
Подробное сравнение бок о бок AD977AN от Analog Devices и AD977ANZ от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | AD977AN | AD977ANZ |
|---|---|---|
| Бренд | Analog Devices | Analog Devices |
| Категория | ADC/DAC | ADC/DAC |
| Статус жизненного цикла | Активен | Активен |
| Разрешение | 16 bit | 16 bit |
| Conversion Throughput | 100 kSPS | — |
| Analog Input Count | 1 input | — |
| Architecture | Successive-approximation switched-capacitor ADC | — |
| Process Technology | BiCMOS | — |
| Напряжение питания | 5 V | 5 V |
| Internal Reference | 2.5 V | 2.5 V |
| Unipolar Input Range 1 | 0 V to 5 V | — |
| Unipolar Input Range 2 | 0 V to 4 V | — |
| Bipolar Input Range 1 | -5 V to +5 V | — |
| Bipolar Input Range 2 | -3.3 V to +3.3 V | — |
| Maximum Power Dissipation | 100 mW | — |
| Power-Down Mode | Supported | — |
| Factory Calibration | Yes | — |
| Интерфейс | High-speed serial interface | — |
| Корпус | 20-pin PDIP | 20-pin PDIP |
| Тип монтажа | Through-hole | Through-hole |
| Диапазон рабочих температур | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Analog Input Type | [DATA_NEEDED: analog input type] | — |
| Input Impedance | [DATA_NEEDED: input impedance] | — |
| SNR | [DATA_NEEDED: signal-to-noise ratio] | — |
| THD | [DATA_NEEDED: total harmonic distortion] | — |
| ENOB | [DATA_NEEDED: effective number of bits] | — |
| Статус RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Converter Type | — | Successive-approximation ADC |
| Throughput Rate | — | 100 kSPS |
| Input Architecture | — | Single-ended, 1 input |
| Output Interface | — | Serial |
| ADC Architecture | — | Switched-capacitor SAR |
| Temperature Grade | — | Industrial |
| Power Consumption | — | [DATA_NEEDED: power consumption] |
| Analog Input Range | — | [DATA_NEEDED: analog input range] |
| Input Resistance | — | [DATA_NEEDED: input resistance] |
| Integral Nonlinearity | — | [DATA_NEEDED: integral nonlinearity] |
| Offset Error | — | [DATA_NEEDED: offset error] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| AEC-Q100 Qualification | — | not_applicable |