AD977AN vs AD977ANZ 비교
다음의 상세 나란히 비교: AD977AN 제조: Analog Devices 및 AD977ANZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD977AN | AD977ANZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 활성 | 활성 |
| 분해능 | 16 bit | 16 bit |
| Conversion Throughput | 100 kSPS | — |
| Analog Input Count | 1 input | — |
| Architecture | Successive-approximation switched-capacitor ADC | — |
| Process Technology | BiCMOS | — |
| 공급 전압 | 5 V | 5 V |
| Internal Reference | 2.5 V | 2.5 V |
| Unipolar Input Range 1 | 0 V to 5 V | — |
| Unipolar Input Range 2 | 0 V to 4 V | — |
| Bipolar Input Range 1 | -5 V to +5 V | — |
| Bipolar Input Range 2 | -3.3 V to +3.3 V | — |
| Maximum Power Dissipation | 100 mW | — |
| Power-Down Mode | Supported | — |
| Factory Calibration | Yes | — |
| 인터페이스 | High-speed serial interface | — |
| 패키지 | 20-pin PDIP | 20-pin PDIP |
| 실장 유형 | Through-hole | Through-hole |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Analog Input Type | [DATA_NEEDED: analog input type] | — |
| Input Impedance | [DATA_NEEDED: input impedance] | — |
| SNR | [DATA_NEEDED: signal-to-noise ratio] | — |
| THD | [DATA_NEEDED: total harmonic distortion] | — |
| ENOB | [DATA_NEEDED: effective number of bits] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Converter Type | — | Successive-approximation ADC |
| Throughput Rate | — | 100 kSPS |
| Input Architecture | — | Single-ended, 1 input |
| Output Interface | — | Serial |
| ADC Architecture | — | Switched-capacitor SAR |
| Temperature Grade | — | Industrial |
| Power Consumption | — | [DATA_NEEDED: power consumption] |
| Analog Input Range | — | [DATA_NEEDED: analog input range] |
| Input Resistance | — | [DATA_NEEDED: input resistance] |
| Integral Nonlinearity | — | [DATA_NEEDED: integral nonlinearity] |
| Offset Error | — | [DATA_NEEDED: offset error] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| AEC-Q100 Qualification | — | not_applicable |