EPC21LC20 vs EPC22LC20 Сравнение

Подробное сравнение бок о бок EPC21LC20 от Intel и EPC22LC20 от Intel. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

Сравнение характеристик

Параметр EPC21LC20 EPC22LC20
Бренд Intel Intel
Категория Memory ICs FPGA & CPLD
Статус жизненного цикла Активен Obsolete
Наличие In Stock In Stock
Цена за единицу (USD) $10,40 $4,10
Тип памяти Serial Configuration PROM (Flash-based, in-system programmable) —
Density 2 Mb (2,097,152 bits) —
Configuration Mode Supported Serial (PS) for Altera SRAM-based LUT FPGAs —
Maximum DCLK Frequency 10 MHz —
Access Time approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] —
Programming Interface IEEE 1149.1 (JTAG) JTAG (IEEE 1149.1 / IEEE 1532)
Program/Erase Endurance 100 cycles minimum [DATA_NEEDED: confirm from datasheet] —
Operating Voltage (VCC) 3.0 V to 3.6 V (3.3 V typical) —
Standby Current [DATA_NEEDED: ICCSB value] —
Active Read Current [DATA_NEEDED: ICC active current] —
Operating Temperature (commercial) 0 °C to +70 °C (LC suffix) —
Operating Temperature (industrial) [DATA_NEEDED: -40 to +85 °C for LI variant] —
Корпус / Типоразмер 20-pin PLCC (J-lead, JEDEC MS-018) 20-LCC (J-Lead, 9 x 9 mm)
Тип монтажа Surface Mount (PLCC socket or solder) Surface Mount (PLCC socket compatible)
Уровень MSL [DATA_NEEDED: confirm moisture sensitivity level] —
Статус RoHS [DATA_NEEDED: confirm from Altera product page] —
Lead-Free (Pb-free) [DATA_NEEDED: confirm] —
Compatible FPGA Families ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) —
JTAG Boundary-Scan Compliant Yes (IEEE Std 1149.1) —
Data Width 1 bit (serial DATA output) —
Функция — In-System Programmable Configuration PROM for SRAM-based FPGAs
Размер памяти — 1.6 Mbit
Programmable Type — In System Programmable (IEEE 1532 / Jam STAPL)
Supply Voltage - Low Range — 3.0 V to 3.6 V
Supply Voltage - High Range — 4.75 V to 5.25 V
Supported FPGA Families — ACEX 1K, APEX II, APEX 20K, FLEX 10K
Configuration Interface — Altera serial configuration (DCLK / DATA0 / nSTATUS / CONF_DONE)
Packaging — Tube
Рабочая температура — 0 C to +70 C (commercial)
Minimum DC Input Voltage — -0.3 V
Input Overshoot Tolerance — 7.0 V for <100 mA, <20 ns no-load
Input Undershoot Tolerance — -2.0 V for <100 mA, <20 ns no-load
Lead-Free / RoHS — [DATA_NEEDED: lead-free status not in verified data]

Даташиты & ресурсы

Все товары Создать BOM Запросить цену