EPC2T32UCAF48 vs EPC2TC32UCF48 Сравнение
Подробное сравнение бок о бок EPC2T32UCAF48 от Intel и EPC2TC32UCF48 от Intel. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | EPC2T32UCAF48 | EPC2TC32UCF48 |
|---|---|---|
| Бренд | Intel | Intel |
| Категория | Memory ICs | Memory ICs |
| Статус жизненного цикла | Активен | NRND |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $10,05 | $10,85 |
| Device Type | Configuration PROM for SRAM-based FPGAs | — |
| Memory Capacity | 32 Mbit | — |
| Интерфейс | Serial / Parallel configuration; JTAG (IEEE 1149.1) ISP | — |
| Напряжение питания | 3.0 V to 3.6 V (3.3 V typical) | — |
| Configuration Modes | Serial, Parallel (8/16-bit) | — |
| JTAG Interface | 4-wire (TMS, TCK, TDI, TDO) | — |
| Cascade Support | Yes (nCASC pin for multi-device chains) | — |
| Рабочая температура | [DATA_NEEDED: operating temperature range] | 0C to +70C (commercial) |
| Корпус | QFP-48 (CAF48) | 48-pin TQFP (7x7 mm) |
| Тип монтажа | Surface Mount | Surface Mount |
| Уровень MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| Статус RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: confirm RoHS compliance] |
| Process Technology | CMOS non-volatile memory | — |
| Manufacturer | Intel (formerly Altera) | — |
| Series | EPC2 (Enhanced Configuration Device) | — |
| Тип памяти | — | Non-volatile configuration PROM (CMOS Flash-based) |
| Memory Density | — | 1.6 Mbit (1.6 Mb / 32 Mbit raw) |
| Memory Configuration | — | Serial configuration bitstream storage |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typical) |
| Supply Voltage (VCCIO) | — | 1.8 V / 2.5 V / 3.3 V (bank-level) |
| Output Drive Current (VCCIO) | — | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] |
| Programming Interface | — | IEEE Std. 1149.1 JTAG (in-system programmable) |
| Configuration Interface | — | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) |
| Supported Configuration Modes | — | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) |
| Daisy Chain Support | — | Yes (multi-device cascade for >16 Mbit FPGAs) |
| Maximum Cascaded Capacity | — | Up to 16 Mbit total across chain |
| Lead Free | — | [DATA_NEEDED: confirm lead-free] |