MAX1480BEPI+ vs MAX1480CCPI+ Сравнение
Подробное сравнение бок о бок MAX1480BEPI+ от Maxim Integrated и MAX1480CCPI+ от Maxim Integrated. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Maxim Integrated
MAX1480CCPI+ - 250kbps Isolated RS-485/422 | Maxim Integrated
MAX1480CCPI+ ✓ АктивенСравнение характеристик
| Параметр | MAX1480BEPI+ | MAX1480CCPI+ |
|---|---|---|
| Бренд | Maxim Integrated | Maxim Integrated |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Product Type | Complete electrically isolated RS-485/RS-422 data interface | Isolated RS-485/RS-422 transceiver |
| Transceiver Configuration | 1 driver / 1 receiver | — |
| Duplex Mode | Half-duplex | Half duplex |
| Supported Protocols | RS-422 and RS-485 | — |
| Скорость передачи данных | 250 kb/s | — |
| Isolation | Electrically isolated | Galvanically isolated logic-side and bus-side interfaces |
| Driver Slew Rate | Reduced-slew-rate driver | Reduced slew rate |
| Receiver Hysteresis | 70 mV | — |
| Supply Architecture | Single +5 V supply on logic side powers both sides | — |
| Корпус | 28-pin PDIP | 28-pin DIP, 0.600 in (15.24 mm) width |
| Корпус / Типоразмер | 28-DIP (0.600 inch, 15.24 mm) | — |
| Тип монтажа | Through-hole | Through-hole |
| Рабочая температура | 0 °C to +70 °C | — |
| Application Category | EMI-sensitive isolated data interfaces | — |
| RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Isolation Voltage | [DATA_NEEDED: isolation voltage rating] | [DATA_NEEDED: isolation withstand voltage] |
| Common-Mode Voltage | [DATA_NEEDED: common-mode voltage rating] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Driver and Receiver Configuration | — | 1 driver and 1 receiver |
| Maximum Data Rate | — | 250 kbps |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Supported Standards | — | RS-485 and RS-422 |
| Logic-Side Supply | — | Single 5 V supply powers both sides of the interface |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Диапазон рабочих температур | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Ток покоя | — | [DATA_NEEDED: quiescent current] |
| Статус RoHS | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |