MAX1480BEPI+ vs MAX1480CCPI+ مقایسه

مقایسه دقیق کنار به کنار MAX1480BEPI+ توسط Maxim Integrated و MAX1480CCPI+ توسط Maxim Integrated. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.

Maxim Integrated
MAX1480BEPI+ MAX1480BEPI+ - 250kbps Isolated RS-485/RS-422 | Maxim

MAX1480BEPI+ - 250kbps Isolated RS-485/RS-422 | Maxim

MAX1480BEPI+ ✓ فعال
Maxim Integrated
MAX1480CCPI+ MAX1480CCPI+ - 250kbps Isolated RS-485/422 | Maxim Integrated

MAX1480CCPI+ - 250kbps Isolated RS-485/422 | Maxim Integrated

MAX1480CCPI+ ✓ فعال

مقایسه مشخصات

پارامتر MAX1480BEPI+ MAX1480CCPI+
برند Maxim Integrated Maxim Integrated
دسته‌بندی Interface ICs Interface ICs
وضعیت چرخه عمر فعال فعال
Product Type Complete electrically isolated RS-485/RS-422 data interface Isolated RS-485/RS-422 transceiver
Transceiver Configuration 1 driver / 1 receiver —
Duplex Mode Half-duplex Half duplex
Supported Protocols RS-422 and RS-485 —
نرخ داده 250 kb/s —
Isolation Electrically isolated Galvanically isolated logic-side and bus-side interfaces
Driver Slew Rate Reduced-slew-rate driver Reduced slew rate
Receiver Hysteresis 70 mV —
Supply Architecture Single +5 V supply on logic side powers both sides —
بسته‌بندی 28-pin PDIP 28-pin DIP, 0.600 in (15.24 mm) width
بسته‌بندی / کیس 28-DIP (0.600 inch, 15.24 mm) —
نوع نصب Through-hole Through-hole
دمای کاری 0 °C to +70 °C —
Application Category EMI-sensitive isolated data interfaces —
RoHS [DATA_NEEDED: RoHS status] —
REACH [DATA_NEEDED: REACH status] —
AEC-Q100 [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Isolation Voltage [DATA_NEEDED: isolation voltage rating] [DATA_NEEDED: isolation withstand voltage]
Common-Mode Voltage [DATA_NEEDED: common-mode voltage rating] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Input Impedance [DATA_NEEDED: receiver input impedance] —
Driver and Receiver Configuration — 1 driver and 1 receiver
Maximum Data Rate — 250 kbps
Supply Voltage Range — 4.5 V to 5.5 V
Supported Standards — RS-485 and RS-422
Logic-Side Supply — Single 5 V supply powers both sides of the interface
Driver Count — 1
Receiver Count — 1
محدوده دمای کاری — [DATA_NEEDED: operating temperature range]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
جریان سکون — [DATA_NEEDED: quiescent current]
وضعیت RoHS — unknown
REACH Status — unknown
AEC-Q100 Qualification — not_applicable

دیتاشیت‌ها و منابع

مرور همه محصولات ایجاد BOM درخواست استعلام قیمت