MW7IC2240NR1 vs MW7IC2240NBR1 Сравнение

Подробное сравнение бок о бок MW7IC2240NR1 от NXP Semiconductors и MW7IC2240NBR1 от NXP Semiconductors. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

NXP Semiconductors
MW7IC2240NR1 MW7IC2240NR1 - 4W W-CDMA RF LDMOS PA, 2110-2170 MHz | NXP

MW7IC2240NR1 - 4W W-CDMA RF LDMOS PA, 2110-2170 MHz | NXP

MW7IC2240NR1 ✓ Активен
NXP Semiconductors
MW7IC2240NBR1 MW7IC2240NBR1 - 4W W-CDMA RF LDMOS Power Amplifier | NXP

MW7IC2240NBR1 - 4W W-CDMA RF LDMOS Power Amplifier | NXP

MW7IC2240NBR1 Obsolete

Сравнение характеристик

Параметр MW7IC2240NR1 MW7IC2240NBR1
Бренд NXP Semiconductors NXP Semiconductors
Категория RF Amplifiers RF Amplifiers
Статус жизненного цикла Активен Obsolete
Наличие In Stock In Stock
Цена за единицу (USD) $13,16 $29,00
Функция RF Power Amplifier (W-CDMA, multi-stage) —
Technology LDMOS (Laterally Diffused MOSFET) RF LDMOS (multi-stage integrated)
Frequency Range 2110 MHz to 2170 MHz (usable 2000-2200 MHz) 2110 MHz to 2170 MHz (usable 2000-2200 MHz)
Average Output Power 4 W (W-CDMA, 28 V) —
Power Gain (Min) 15 dB —
Drain Supply Voltage 24 V to 32 V (28 V typical) —
Input VSWR 5:1 5:1
Output VSWR 5:1 5:1
Nominal Impedance 50 ohm (DC-blocked input, >3 ohm output) 50 ohm (on-chip matched)
Spurious Emissions Below -60 dBc from 100 mW to 10 W CW Pout —
On-Chip Matching Yes (input 50 ohm DC-blocked, partial output) —
Quiescent Current Compensation Integrated with temperature compensation —
Enable Function Yes —
Корпус TO-270 WBL-16 (TO-270WB16), 16-pin ceramic TO-272 WB-16 (over-molded plastic, 16-lead)
Operating Modulation Formats W-CDMA, TD-SCDMA, LTE-FDD, multi-carrier —
Тип монтажа Surface Mount / flange mount with ground pad Surface Mount
Modulation / RF Type — W-CDMA (also TD-SCDMA, LTE)
Output Power (Average) — 4 W Avg. @ 2112.5 MHz, single-carrier W-CDMA
Supply Voltage (VDD) — 28 V (rated 24 V to 32 V operation)
Quiescent Current Stage 1 (IDQ1) — 90 mA
Quiescent Current Stage 2 (IDQ2) — 420 mA
Minimum Gain — 15 dB (typical 30 dB)
P1dB (Output) — 46 dBm (per distributor listing)
Terminal Finish — Matte Tin (Sn)
Package Body Material — Plastic / Epoxy
Operating Mode — 100% PAR tested for W-CDMA-like signals
Статус RoHS — [DATA_NEEDED: RoHS compliance]

Даташиты & ресурсы

Все товары Создать BOM Запросить цену