PN7160A1HN vs PN7161A1HN Сравнение
Подробное сравнение бок о бок PN7160A1HN от NXP Semiconductors и PN7161A1HN от NXP Semiconductors. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
NXP Semiconductors
PN7161A1HN - NFC Plug & Play Controller with Apple ECP | NXP
PN7161A1HN ✓ АктивенСравнение характеристик
| Параметр | PN7160A1HN | PN7161A1HN |
|---|---|---|
| Бренд | NXP Semiconductors | NXP Semiconductors |
| Категория | RF Modules | RF Modules |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $2,15 | $4,72 |
| Product Type | NFC Plug and Play Controller | — |
| Operating Frequency | 13.56 MHz | — |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC | ISO 14443 A/B, ISO 15693, FeliCa, MIFARE Classic, MIFARE DESFire, NTAG, NFC Forum Type 1-5 |
| Host Interface | I2C (default, hardware) / SPI (EEPROM-configurable) | NCI 1.0 over I2C |
| NCI Version | NCI 2.0 (pre-loaded firmware) | — |
| Digital Supply Voltage | 1.65 V to 1.95 V (VDD) | — |
| Analog/RF Supply Voltage | 3.0 V to 3.6 V (VBAT, VBAT_PA) | — |
| I/O Supply Voltage | 1.65 V to 1.95 V (VDDIO) | — |
| I2C Address | 0x28 (7-bit) | — |
| RF Output Power | [DATA_NEEDED: TX output power dBm] | Up to 1.5 W into antenna load |
| Antenna Pins | TX1, TX2 (differential); RX1, RX2 | — |
| Integrated MCU Core | ARM Cortex-M0 (ROM-resident NCI firmware) | — |
| Operating Modes | Reader/Writer, Card Emulation (P2P), Tag Detection | — |
| Modes of Operation | Active, Standby, Hard Power Down, Low-Power Polling | — |
| Корпус | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad | 40-VFQFN Exposed Pad (HVQFN, 6x6 mm) |
| Тип монтажа | Surface Mount | Surface Mount |
| Peak Reflow Temperature | 260 C (per JEDEC J-STD-020) | — |
| Moisture Sensitivity Level | MSL 3 | — |
| Статус RoHS | Compliant | Compliant |
| Рабочая температура | -30 C to +85 C | -40 C to +85 C |
| Функция | — | NFC Controller with NCI interface |
| RF Frequency | — | 13.56 MHz |
| Operating Voltage (VCC) | — | 1.65 V to 3.6 V |
| Operating Voltage (VBAT variant) | — | 3.0 V to 5.5 V |
| Reader/Writer Mode | — | Yes |
| P2P / Card Emulation | — | Yes |
| Apple ECP Support | — | Yes (authorization required) |
| Integrated Firmware | — | Yes (loaded via I2C) |
| Cryptographic Acceleration | — | AES-128, Crypto1 |
| LPCD Current | — | ~100 uA |
| Уровень MSL | — | 3 |