PN7160A1HN vs PN7161A1HN Vergleich
Detaillierter Direktvergleich von PN7160A1HN von NXP Semiconductors und PN7161A1HN von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | PN7160A1HN | PN7161A1HN |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | RF Modules | RF Modules |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,15 | $4,72 |
| Product Type | NFC Plug and Play Controller | — |
| Operating Frequency | 13.56 MHz | — |
| Supported Protocols | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC | ISO 14443 A/B, ISO 15693, FeliCa, MIFARE Classic, MIFARE DESFire, NTAG, NFC Forum Type 1-5 |
| Host Interface | I2C (default, hardware) / SPI (EEPROM-configurable) | NCI 1.0 over I2C |
| NCI Version | NCI 2.0 (pre-loaded firmware) | — |
| Digital Supply Voltage | 1.65 V to 1.95 V (VDD) | — |
| Analog/RF Supply Voltage | 3.0 V to 3.6 V (VBAT, VBAT_PA) | — |
| I/O Supply Voltage | 1.65 V to 1.95 V (VDDIO) | — |
| I2C Address | 0x28 (7-bit) | — |
| RF Output Power | [DATA_NEEDED: TX output power dBm] | Up to 1.5 W into antenna load |
| Antenna Pins | TX1, TX2 (differential); RX1, RX2 | — |
| Integrated MCU Core | ARM Cortex-M0 (ROM-resident NCI firmware) | — |
| Operating Modes | Reader/Writer, Card Emulation (P2P), Tag Detection | — |
| Modes of Operation | Active, Standby, Hard Power Down, Low-Power Polling | — |
| Gehäuse | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad | 40-VFQFN Exposed Pad (HVQFN, 6x6 mm) |
| Montageart | Surface Mount | Surface Mount |
| Peak Reflow Temperature | 260 C (per JEDEC J-STD-020) | — |
| Moisture Sensitivity Level | MSL 3 | — |
| RoHS-Status | Compliant | Compliant |
| Betriebstemperatur | -30 C to +85 C | -40 C to +85 C |
| Funktion | — | NFC Controller with NCI interface |
| RF Frequency | — | 13.56 MHz |
| Operating Voltage (VCC) | — | 1.65 V to 3.6 V |
| Operating Voltage (VBAT variant) | — | 3.0 V to 5.5 V |
| Reader/Writer Mode | — | Yes |
| P2P / Card Emulation | — | Yes |
| Apple ECP Support | — | Yes (authorization required) |
| Integrated Firmware | — | Yes (loaded via I2C) |
| Cryptographic Acceleration | — | AES-128, Crypto1 |
| LPCD Current | — | ~100 uA |
| MSL-Level | — | 3 |