SN75176 vs MAX485ECPA+ Сравнение

Подробное сравнение бок о бок SN75176 от Texas Instruments и MAX485ECPA+ от Maxim Integrated. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

Maxim Integrated
MAX485ECPA+ MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim

MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim

MAX485ECPA+ ✓ Активен

Сравнение характеристик

Параметр SN75176 MAX485ECPA+
Бренд Texas Instruments Maxim Integrated
Категория Interface ICs Interface ICs
Статус жизненного цикла Активен Активен
Функция Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Receiver Hysteresis 50 mV (typical) —
Supply Voltage (Vcc) 4.75 V to 5.25 V —
Рабочая температура 0 °C to +70 °C Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range]
Driver Output Current ±60 mA (max) [DATA_NEEDED: output current (standard / high-impedance load)]
Common-Mode Input Range -7 V to +12 V —
Differential Input Threshold ±200 mV —
Quiescent Supply Current (enabled) 30 mA (typical) —
Shutdown Supply Current 1 µA (typical) —
Корпус 8-pin PDIP (P) PDIP-8 (8-pin plastic DIP, through-hole)
Тип монтажа Through-Hole Through Hole
Standards Compliance ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 —
Статус RoHS Compliant Compliant (Maxim lead-free suffix '+')
Transceiver Configuration — 1 driver / 1 receiver, half-duplex
Interface Standard — RS-485 / RS-422 differential
Напряжение питания — 5 V nominal (4.5 V to 5.5 V)
Maximum Data Rate — 1 Mbps (slew-rate-limited driver)
Driver Output Type — Differential, limited slew rate
ESD Protection — +/-15 kV on driver outputs and receiver inputs
Quiescent (Supply) Current — [DATA_NEEDED: quiescent current]
Receiver Common-Mode Range — [DATA_NEEDED: receiver common-mode voltage range]
Receiver Input Sensitivity — [DATA_NEEDED: receiver differential threshold]
Driver Output Differential Voltage — [DATA_NEEDED: differential output voltage]
Enable Pins — DE (driver enable) and /RE (receiver enable, active-low), separate pins
Short-Circuit Protection — Yes, driver outputs are short-circuit current limited
Тепловая защита — Yes, protects against excessive power dissipation
Quiescent Current Shutdown Pin — Not present on this device
Qualification — Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status]

Даташиты & ресурсы

Все товары Создать BOM Запросить цену