A3P600L-1FGG484I - ProASIC3L FPGA 600K | Microchip
Артикул: A3P600L-1FGG484I ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $28.6 | $28,60 |
| 10 | $26.4 | $264,00 |
| 100 | $23.1 | $2.310,00 |
| 500 | $20.85 | $10.425,00 |
| 1.000 | $18.2 | $18.200,00 |
| 3.000 | $17.1 | $51.300,00 |
A3P600L-1FGG484I Обзор
A Field Programmable Gate Array (FPGA) is an integrated circuit whose logic fabric can be configured after manufacturing to implement arbitrary digital logic. Unlike fixed-function ASICs, FPGAs allow designers to create custom state machines, DSP chains, interface bridges, and parallel processing engines. The ProASIC3L family sits in the FPGA hierarchy below large SRAM-based devices and above CPLDs, offering hundreds of I/O and hundreds of thousands of gates while retaining the simplicity of a flash-based single-chip solution.
Key features of the A3P600L-1FGG484I include 600K system gates, 13,824 logic elements, 110,592 bits of RAM, 235 user I/O, and a maximum operating frequency of 350 MHz. Built in 130 nm CMOS technology with a 1.2 V core, the device supports battery-friendly low-power designs and multi-voltage I/O banks. The 484-ball FBGA package provides a compact 23 x 23 mm footprint while allowing dense board integration.
From a technical depth perspective, ProASIC3L FPGAs use flash-based configuration cells that retain the programming even when power is removed. This eliminates the need for external configuration memory in many applications and provides a secure, non-volatile bitstream. The device is reprogrammable, enabling field updates and prototyping flexibility, while the 1.2 V core voltage minimizes switching power compared to earlier 1.5 V families.
Typical applications include industrial automation, communications infrastructure, aerospace and defense electronics, medical imaging, edge computing, and automotive body control. The 235 user I/O can connect to ADCs, DACs, Ethernet PHYs, sensors, and motor-drive gate drivers, making the device a versatile integration point in mixed-signal systems.
When designing with this FPGA, pay attention to the 1.2 V core supply decoupling and the bank-specific I/O supply voltages. Use sufficient bypass capacitance at the power balls and follow the manufacturer layout recommendations for the 484-ball FBGA to maintain signal integrity at 350 MHz.
This page synthesizes distributor sourcing clues, drop-in Microchip alternatives, and practical FPGA design notes that go beyond a raw datasheet listing, helping engineers evaluate the A3P600L-1FGG484I more quickly.
Аналоги без доработки для A3P600L-1FGG484I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с A3P600L-1FGG484I (тот же форм-фактор и посадочное место) — отличается по Package, Configuration Memory, Technology, Operating Temperature, Core Voltage.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
A3P600L-1FGG484
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$30.4 / шт.
Открыть даташит →A3P600L-2FGG484I
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
A3P600L-2FGG484
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
A3P600L-1FG484I
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
Уточнить цену
Открыть даташит →A3P600L-2FG484I
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
A3P600L-1FGG484I Максимальные параметры и электрические характеристики
| Manufacturer | Microchip Technology |
| Product Type | FPGA - Field Programmable Gate Array |
| Series | ProASIC3L |
| Total System Gates | 600000 |
| Number of Logic Elements / Cells | 13824 |
| Total RAM Bits | 110592 bits |
| Number of I/O | 235 |
| Maximum Operating Frequency | 350 MHz |
| Core Supply Voltage | 1.2 V |
| Technology | CMOS 130 nm |
| Корпус / Типоразмер | 484-BGA (FBGA), 23 x 23 mm |
| Количество выводов | 484 |
| Speed Grade | -1 |
Руководство по цоколевке A3P600L-1FGG484I в корпусе 484-bga (fbga), 23 x 23 mm
Цоколевка для A3P600L-1FGG484I (корпус 484-bga (fbga), 23 x 23 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для A3P600L-1FGG484I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
A3P600L-1FGG484I подходит для 6 применениеs: Industrial Automation and Motor Control, Wired and Wireless Communications, Aerospace and Defense Electronics, Medical Imaging and Diagnostics, Edge Computing and IoT Gateways, Automotive Body Electronics.
Industrial Automation and Motor Control
The A3P600L-1FGG484I fits industrial automation and motor control because its 600K system gates and 235 user I/O can implement multi-axis PWM generation, quadrature encoder interfaces, and safety logic in a single flash FPGA. The 1.2 V core and 350 MHz rating allow fast, deterministic switching for servo loops, while the 110,592 bits of RAM support parameter tables and small data buffers. Unlike SRAM FPGAs, the flash configuration is immediately available on power-up, reducing boot delay in safety-critical machinery. With an industrial temperature 'I' variant, the device can be placed near motors, drives, and power stages in cabinets subject to elevated ambient temperatures. Designers can use the abundant I/O to connect to resolver/digital converters, gate drivers, and industrial Ethernet PHYs, replacing multiple CPLDs and discrete logic devices.
Рекомендуется
Wired and Wireless Communications
In communications systems, the A3P600L-1FGG484I provides a flexible bridge between high-speed transceivers, data converters, and control processors. Its 235 user I/O can be partitioned into multiple banks to handle LVDS, LVCMOS, and other standards, allowing protocol conversion and packet processing without a separate CPLD. The 110,592 bits of RAM are useful for elastic buffers and FIFOs, while the 13,824 logic elements can implement framing, CRC, and state-machine protocol logic. The flash-based architecture also provides robust security against bitstream copy, a concern in network infrastructure equipment. Additionally, the compact 23 x 23 mm FBGA footprint allows dense line-card layouts, and the 1.2 V core keeps thermal dissipation manageable in enclosed networking enclosures.
Рекомендуется
Aerospace and Defense Electronics
The A3P600L-1FGG484I is well suited to aerospace and defense electronics because ProASIC3L flash FPGAs offer non-volatile, instant-on configuration and a single-chip design that reduces system complexity. The 600K gates provide enough capacity for interface bridging, sensor processing, and command decoding, while 235 I/O can connect to avionics buses, discrete discrete discretes, and data converters. Radiation-tolerant variants within the ProASIC3L family are often used in space systems; the commercial industrial-grade part is commonly used in ground support equipment, flight instrumentation, and unmanned vehicles. Because no external boot memory is required, the design has fewer single points of failure. The industrial temperature suffix supports demanding environmental conditions, and the 1.2 V core contributes to lower power budgets in battery-powered avionics.
Рекомендуется
Medical Imaging and Diagnostics
Medical imaging equipment such as ultrasound front-ends, CT data acquisition boards, and patient monitors require deterministic parallel processing and many I/O channels. The A3P600L-1FGG484I can handle multi-channel ADC data acquisition, digital filtering, and timing generation while maintaining the low-latency response needed for real-time imaging. The 110,592 bits of RAM provide local buffering between ADC samples and an external processor, reducing bus contention. The device's flash configuration also means no external configuration PROM, which is valuable in compact medical modules. Its industrial temperature rating allows placement in ventilated but warm instrument racks, and the 1.2 V core reduces heat dissipation in sealed enclosures. Engineers can implement custom interfaces to CMOS image sensors, AFEs, and display controllers with the 235 available I/O.
Рекомендуется
Edge Computing and IoT Gateways
The A3P600L-1FGG484I is an excellent choice for edge computing and IoT gateways that need flexible protocol interfacing, sensor aggregation, and pre-processing. Its 235 I/O can connect multiple industrial buses, serial sensors, and wireless module interfaces simultaneously. The flash-based non-volatile architecture enables instant-on operation, which is critical for low-power edge nodes that cycle power frequently. The 600K gates are sufficient for lightweight machine-learning pre-processing, protocol conversion, and cryptography offload when paired with a host processor. The 1.2 V core and 23 x 23 mm FBGA package contribute to compact PCB layouts, while the industrial temperature grade makes the device robust for outdoor and harsh industrial IoT installations. The built-in RAM supports FIFOs and packet buffers without adding external SRAM.
Рекомендуется
Automotive Body Electronics
In automotive body electronics, the A3P600L-1FGG484I can implement lighting control, seat actuation, door module logic, and gateway bridging functions. The industrial temperature grade and flash-based instant-on behavior suit the automotive power environment, where fast wake-up is required. The 235 I/O allow direct interfacing to switch inputs, LED drivers, LIN/CAN transceivers, and sensor signals. The 13,824 logic elements provide more capacity than traditional CPLDs, enabling integration of multiple body functions into a single device. The 1.2 V core reduces power dissipation in the cabin controller, and the non-volatile configuration survives power cycling without external memory. This simplifies board design and improves reliability in vibration-prone automotive environments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для A3P600L-1FGG484I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | A3P600L-1FGG484 | A3P600L-2FGG484I | A3P600L-2FGG484 |
|---|---|---|---|---|
| Package | 484-FBGA | 484-FBGA | 484-FBGA | 484-FBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Total System Gates | 600000 | 600000 | 600000 | 600000 |
| Number of Logic Elements / Cells | 13824 | 13824 | 13824 | 13824 |
| Total RAM Bits | 110592 bits | 110592 bits | 110592 bits | 110592 bits |
| Number of I/O | 235 | 235 | 235 | 235 |
| Speed Grade | -1 | -1 | -2 | -2 |
| Temperature Grade | Industrial (I) | Commercial | Industrial (I) | Commercial |
Ключевые отличия
- Industrial temperature grade for harsh environments (против A3P600L-1FGG484)
- Balance of speed and power at -1 speed grade (против A3P600L-2FGG484I)
- Green (FGG) package finish (против A3P600L-1FG484I)
Заметки по проектированию
Estimated: The A3P600L-1FGG484I uses a 1.2 V core supply; total FPGA dynamic power depends on the implemented logic, clock frequency, and I/O toggling. As a starting estimate, calculate core power as Cpd x VDD^2 x f using the capacitance parameters in the ProASIC3L datasheet, and add I/O power for each bank. Place 100 nF and 1 uF decoupling capacitors close to each pair of VDD and GND balls, plus a bulk capacitor on the board. Verify with thermal analysis before finalizing the PCB.
For the 484-ball FBGA package, use micro-via or via-in-pad techniques to bring the 1.2 V core, I/O supplies, and ground balls to the routing layers. Keep the analog and digital I/O banks separated from each other to reduce noise coupling. Follow the Microchip layout guidelines for ProASIC3L devices, paying special attention to the VJTAG, TCK, TMS, TDI, and TDO pins used for programming. The 23 x 23 mm package requires a precise solder paste stencil and X-ray inspection after assembly for reliable BGA solder joints.
A common design pitfall is forgetting that ProASIC3L FPGAs are flash-based and do not require an external SPI flash for configuration, so designers may accidentally leave the JTAG programming header unconnected or misroute the dedicated programming pins. Verify the bank voltage for each I/O standard before connecting external devices. Also, do not exceed the absolute maximum voltage on any I/O pin, and remember that the 'I' variant is industrial grade but not radiation-tolerant unless explicitly ordered as a RadHard part.
Информация о соответствии
FGG package code suggests green/RoHS-compliant finish, but this is not explicitly stated in the verified web snippets. AEC-Q100 does not apply to this FPGA class.
