A3PE600-PQ208 - 600K-Gate Flash FPGA | Microchip
Артикул: A3PE600-PQ208 ✗ Снят с производстваA3PE600-PQ208 Обзор
A ProASIC3E FPGA is a programmable logic device within the FPGA and CPLD hierarchy. It combines configurable logic, embedded block RAM, programmable I/O, and on-chip flash configuration in one package. Unlike SRAM-based FPGAs that require an external configuration source during every startup, the flash-based ProASIC3E architecture supports configuration retention and live-at-power-up operation, making it suitable for control, interface, data acquisition, and embedded processing systems.
The A3PE600 density provides 600,000 system gates and 147 user I/O in a compact 28 x 28 mm PQ208 package. Its 110,592-bit block RAM supports buffers, packet storage, lookup structures, and moderate-width data-processing functions. The 1.425 V to 1.575 V operating range identifies it as a low-voltage core device, while its integrated flash allows the programmed configuration to remain resident in the device.
The ProASIC3E family is supported by Microsemi-style development tools and programming workflows, including Libero IDE and programmer hardware. Engineers can use the device for parallel logic, control-plane state machines, bridge functions, protocol termination, and embedded sub-systems. The PQ208 package offers many I/O for medium-complexity systems without moving to a larger ball-grid-array package, although fine-pitch assembly demands careful PCB layout and inspection.
Typical uses include industrial automation, communications equipment, test and measurement, embedded instrumentation, interface consolidation, and compact embedded control. In each case, the 147 available I/O allow external memories, converters, transceivers, and status interfaces to be connected while internal flash retains the configuration through power cycles.
The principal design consideration is package accessibility. A 208-pin PQFP requires a multilayer PCB with fine-pitch fanout, careful via placement, and assembly-process controls for lead coplanarity. Signal-integrity and power planning should account for the 1.575 V maximum listed core voltage, while unused I/O should be configured according to the manufacturer's guidelines rather than left mechanically unconstrained.
This product record combines the device architecture, package information, lifecycle considerations, replacement assessment, and application-oriented design guidance. It also distinguishes the exact A3PE600-PQ208 ordering code from industrial, lead-free, and speed-grade variants so engineers can confirm pin compatibility, temperature requirements, and device qualification before ordering.
Аналоги без доработки для A3PE600-PQ208 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с A3PE600-PQ208 (тот же форм-фактор и посадочное место) — отличается по Package, System Gates, Configuration Memory, Operating Temperature, Process Technology.
A3PE600-PQ208I
✅ Прямая заменаУточнить цену
Открыть даташит →A3PE600-PQG208
✅ Прямая заменаУточнить цену
Открыть даташит →A3PE600-PQG208I
✅ Прямая заменаУточнить цену
Открыть даташит →A3PE600-1PQG208
✅ Прямая заменаУточнить цену
Открыть даташит →A3PE600-1PQ208I
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
A3PE600-PQ208 Максимальные параметры и электрические характеристики
| Device Type | ProASIC3E Flash Field Programmable Gate Array |
| System Gates | 600,000 gates |
| Programmable I/O | 147 I/O |
| Embedded Block RAM | 110,592 bits |
| Core Supply Voltage | 1.425 V to 1.575 V |
| Configuration Memory | On-chip flash |
| Configuration Feature | Live-at-power-up capable |
| Корпус | 208-pin PQFP, 28 x 28 mm |
| Число выводов | 208 pins |
| Тип монтажа | Surface mount |
| Process Technology | 130 nm CMOS |
| Metal Layers | 7 layers, including 6 copper layers |
| Global Clock and Reset Capacity | 6 CCCs and 2 PLLs in the PQ208 package |
Руководство по цоколевке A3PE600-PQ208 в корпусе 208-pin pqfp, 28 x 28 mm
Цоколевка для A3PE600-PQ208 (корпус 208-pin pqfp, 28 x 28 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для A3PE600-PQ208.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
A3PE600-PQ208 подходит для 6 применениеs: Industrial Automation Controllers, Communications Interface Consolidation, Data Acquisition and Signal Conditioning, Test and Measurement Instruments, Embedded System Interface Bridges, Embedded Flash Configuration.
Industrial Automation Controllers
The A3PE600-PQ208 suits compact industrial controllers that combine sequencing, interlocks, status monitoring, and communications adaptation in one programmable device. Its 600,000 system gates provide substantial logic capacity, while 147 programmable I/O can connect sensors, relay drivers, operator interfaces, and field-bus transceivers. The 110,592-bit block RAM can support state history, diagnostic buffers, and data snapshots. On-chip flash permits the control configuration to remain resident through power cycles, reducing external configuration-memory requirements. For deployment, select the temperature grade that covers the enclosure conditions and verify the 1.425 V to 1.575 V core-supply requirement against the available power architecture.
Рекомендуется
Communications Interface Consolidation
The A3PE600-PQ208 can consolidate protocol bridges, framing logic, buffers, and supervisory state machines in a communications interface card. Its 147 I/O provide ample connections for parallel data buses, control signals, and status LEDs, while 110,592 bits of block RAM are sufficient for packet staging and flow-control structures. The integrated flash-based configuration supports field-reconfigurable communication personalities without requiring the logic to be loaded from an external memory after every power cycle. Engineers should use the family clock-and-reset resources carefully to meet interface timing, and should select A3PE600-PQ208I when extended industrial temperature operation is required by the installed equipment.
Рекомендуется
Data Acquisition and Signal Conditioning
A3PE600-PQ208 is appropriate for parallel data-acquisition front ends where sensor outputs must be sampled, filtered, counted, and packaged for a host processor. The 147 programmable I/O can accommodate multiple converter channels, digital comparators, trigger signals, and interface buses, while the 110,592-bit block RAM can provide acquisition windows and working buffers. The 600,000-gate capacity allows substantial control and datapath logic to be consolidated instead of distributed among several fixed-function devices. Designers should assign sensitive signals according to the package guidance, preserve required clocking resources, and confirm analog-interface timing separately because the FPGA performs digital processing rather than replacing the front-end converter.
Рекомендуется
Test and Measurement Instruments
The A3PE600-PQ208 can implement instrument control, pattern generation, timing supervision, and result capture within a compact measurement system. Its 147 user I/O support instrument control lines, trigger paths, status indicators, and external memory or converter connections, while 110,592 bits of embedded RAM assist with captured samples and intermediate processing. Because ProASIC3E uses nonvolatile on-chip flash, a stored instrument configuration can be available at power-up, which is useful for repeatable standalone test equipment. Timing-sensitive paths should be evaluated against the selected speed grade, and PCB layout should minimize clock crosstalk and provide clean return paths for sensitive acquisition and reference signals.
Рекомендуется
Embedded System Interface Bridges
A3PE600-PQ208 is well suited to legacy-system bridge functions where a processor interface must connect to parallel peripherals, memory, or custom logic. The programmable I/O count provides enough external connectivity for address, data, and control signals, while the embedded RAM can implement dual-port buffers, command queues, or asynchronous data crossings. Integrating configuration flash reduces board-level support circuitry compared with a nonvolatile-memory requirement in an SRAM-FPGA design. The migration plan should include pin-level comparison of any proposed A3PE600 ordering option, review of global clock and reset assignments, and confirmation that the selected package's 208 leads are manufacturable using the PCB assembly process.
Рекомендуется
Embedded Flash Configuration
The A3PE600-PQ208 is useful where a product must retain programmable logic across power cycles without relying on an external configuration PROM. Its on-chip flash supports live-at-power-up behavior, allowing the FPGA to begin operating from its stored design after reset. This is valuable for remote equipment, maintenance controllers, and compact products where maintaining a separate configuration-memory device would increase board complexity. The implementation still requires a supported programming cable or equivalent interface during manufacturing and field updates. Engineers should plan programming access, write protection, and recovery procedures according to the Microchip ProASIC3E documentation, and should verify supply sequencing before programming or normal startup.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для A3PE600-PQ208 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | A3PE600-PQ208I | A3PE600-PQG208 | A3PE600-PQG208I | A3PE600-1PQG208 | A3PE600-1PQ208I |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 208-pin PQFP, 28 x 28 mm | 208-pin PQFP, 28 x 28 mm | 208-pin PQFP, 28 x 28 mm | 208-pin PQFP, 28 x 28 mm | 208-pin PQFP, 28 x 28 mm | 208-pin PQFP, 28 x 28 mm |
| FPGA Family | ProASIC3E | ProASIC3E | ProASIC3E | ProASIC3E | ProASIC3E | ProASIC3E |
| System Gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates |
| Programmable I/O | 147 I/O | 147 I/O | 147 I/O | 147 I/O | 147 I/O | 147 I/O |
| Embedded Block RAM | 110,592 bits | 110,592 bits | 110,592 bits | 110,592 bits | 110,592 bits | 110,592 bits |
| Core Supply Voltage | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V |
| Speed Grade | Standard | Standard | Standard | Standard | -1 speed grade | -1 speed grade |
Ключевые отличия
- Retains configuration through power cycles (против A3P600-PQ208)
- Direct industrial-temperature family option (против A3PE600-PQ208I)
- Higher-speed migration remains package compatible (против A3PE600-1PQG208)
- Lead-free-family option without changing the footprint (против A3PE600-PQG208)
Заметки по проектированию
Design the A3PE600-PQ208 footprint for a 208-pin PQFP with a 28 x 28 mm body and 1 mm lead pitch. Follow the Mechanical Drawings and PQ208 Package Connections document for land geometry rather than scaling a generic QFP footprint. Check pad length, toe, heel, and solder-mask clearance against the selected PCB assembler because lead coplanarity and paste volume strongly affect 1 mm-pitch assembly yield.
Plan a dedicated 1.425 V to 1.575 V core rail and provide local bypass capacitance close to the supply pins. Use the ProASIC3E family power-consumption tables with the actual clocking, I/O, and temperature assumptions because dynamic FPGA power depends on implemented logic and switching activity. Keep the core return path continuous across every layer and separate noisy external circuitry from the device's supply pins to reduce IR drop and supply bounce.
Assign clocks, resets, configuration pins, and high-fanout user I/O from the package-specific tables before signal-path routing. The PQ208 package supports six CCCs and two PLLs, so inventory clock-capable pins before committing the board architecture. Route clocks over continuous ground or a controlled reference plane, avoid stubs, and use the recommended terminations when driving external clock sources into the FPGA.
Do not treat suffix changes as packaging-only changes. The I option changes temperature positioning, the QG option identifies a lead-free-family ordering code, and the -1 option changes speed grade. Confirm the exact replacement's temperature, timing, power, and lifecycle conditions. Also review every user pin in the original design against the A3PE600 package table rather than assuming that all A3PE600 variants in the PQ208 package use identical I/O assignments.
Информация о соответствии
The A3PE600 family and ordering suffixes are identified, but the exact A3PE600-PQ208 compliance declarations are not stated in the manufacturer excerpts. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status before production release.