A54SX32A-TQG100A - SX-A FPGA 48K Gates 81 I/O TQFP-100 | Microchip
Артикул: A54SX32A-TQG100A ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $268 | $268,00 |
| 10 | $255 | $2.550,00 |
| 100 | $247.85 | $24.785,00 |
| 500 | $240 | $120.000,00 |
| 1.000 | $235 | $235.000,00 |
A54SX32A-TQG100A Обзор
An FPGA is a reprogrammable semiconductor device that implements digital logic through configurable logic blocks and programmable interconnects. Within the programmable-logic hierarchy, the SX-A sits under antifuse FPGAs -> FPGAs -> programmable logic ICs -> embedded ICs. Unlike SRAM-based FPGAs, the SX-A family uses antifuse programming technology, which retains its configuration permanently and is inherently more resistant to configuration readback and single-event upset, making the family attractive for high-reliability and long-lifecycle systems.
Key features of the A54SX32A include a 0.25 um CMOS process technology, low power consumption typical of antifuse architectures (no configuration SRAM to power), and single-chip integration that replaces multiple glue-logic devices. The device is fabricated on a proven 0.25 um CMOS process, delivering deterministic timing and the security benefits of antifuse programming, which cannot be read back after programming.
Technically, the SX-A architecture provides combinational and sequential logic capacity with dedicated flip-flops enabling synchronous design methodologies. Design entry and programming are performed using Microchip (Microsemi) Libero SoC design tools, and one-time programmable antifuse programming delivers permanent configuration without an external boot device.
Typical applications include industrial control, communications equipment, aerospace and defense subsystems (via industrial/military temp variants), medical instrumentation, and legacy system sustainment where a mature, proven FPGA is required.
A key design consideration is that antifuse FPGAs are one-time programmable: design changes require a new device, so verify the design fully in simulation before programming. Pricing on this page is referenced as of 2026-09-03.
This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical design guidance not consolidated in the manufacturer datasheet.
Аналоги без доработки для A54SX32A-TQG100A — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с A54SX32A-TQG100A (тот же форм-фактор и посадочное место) — отличается по Package, System Gates, Family, Operating Temperature, RoHS Status.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
A54SX32A-TQG100I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
A54SX32A-2TQG100
✅ Прямая замена✓ В наличии
$187.85 / шт.
Открыть даташит →A54SX16A-TQG100
✅ Прямая замена✓ В наличии
$20.8 / шт.
Открыть даташит →A54SX32A-TQG144IX53
✅ Прямая замена✓ В наличии
$302 / шт.
Открыть даташит →A54SX32A-TQG100A Максимальные параметры и электрические характеристики
| Family | SX-A (antifuse FPGA) |
| Number of Gates | 48000 |
| Available System Gates | Up to 108000 |
| User I/O | 81 |
| Dedicated Flip-Flops | 2012 |
| Process Technology | 0.25 um CMOS |
| Programming Technology | Antifuse (one-time programmable) |
| Корпус | 100-TQFP (LQFP) |
| Тип монтажа | Surface Mount |
| Lead Free Status | Lead Free |
| Статус RoHS | RoHS Compliant |
| Product Type | FPGA - Field Programmable Gate Array |
Руководство по цоколевке A54SX32A-TQG100A в корпусе 100-tqfp (lqfp)
Цоколевка для A54SX32A-TQG100A (корпус 100-tqfp (lqfp)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для A54SX32A-TQG100A.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
A54SX32A-TQG100A подходит для 6 применениеs: Industrial Control and Automation, Communications Equipment, Aerospace and Defense Subsystems, Medical Instrumentation, Legacy System Sustainment and Obsolescence Management, Test and Measurement Equipment.
Industrial Control and Automation
The A54SX32A-TQG100A fits industrial control by consolidating PLC glue logic, bus interfacing, and sequencing functions into one antifuse FPGA with 48,000 gates and 81 user I/O on a 0.25 um CMOS process. Its instant-on antifuse configuration means control logic is active the moment power is applied, with no boot delay or external configuration device that could fail in the field. In a typical installation the device sits between a microcontroller and motor drives or field sensors, implementing state machines and safety interlocks with deterministic, security-resistant configuration that cannot be read back or altered in service.
Рекомендуется
Communications Equipment
In telecom and datacom line cards, the A54SX32A-TQG100A implements framing, address decoding, and backplane interface logic where 81 user-programmable I/O and up to 108,000 system gates provide ample routing resources. The antifuse architecture delivers deterministic timing suited to synchronous backplane protocols and avoids configuration-upset risk during long unattended operation, a known weakness of SRAM FPGAs. Designers typically place it between physical-layer devices and a back-end processor, using the Libero flow to close timing; the permanent configuration also reduces bill-of-materials cost by eliminating the serial flash that SRAM FPGAs require.
Рекомендуется
Aerospace and Defense Subsystems
Although the commercial-grade A54SX32A-TQG100A is aimed at benign environments, the SX-A antifuse family is widely used in aerospace and defense sustainment programs because its configuration cannot be read back and is inherently resistant to configuration single-event upset. Designers prototype on the commercial grade and migrate to industrial or military SX-A ordering codes for flight builds, retaining the same 100-TQFP footprint. Typical roles include telemetry encoding, arbitration logic, and interface bridging between rad-hard processors and peripheral circuits, with the 2,012 dedicated flip-flops supporting registered, pipeline-heavy designs.
Рекомендуется
Medical Instrumentation
Medical diagnostic equipment such as patient monitors and lab analyzers benefits from the A54SX32A-TQG100A's combination of 48,000 gates, 81 flexible I/O, and permanent antifuse configuration. Instrument front ends use the FPGA to sequence ADC sampling, drive actuator logic, and buffer data between analog front ends and host processors; the deterministic, instantly-loaded configuration simplifies power-on self-test routines required by regulatory validation. Because medical products have long service lives, the mature, single-sourced SX-A family with documented 0.25 um CMOS process characteristics supports sustained production and change-controlled design baselines.
Рекомендуется
Legacy System Sustainment and Obsolescence Management
A major use of the A54SX32A-TQG100A is replacing discontinued PLDs and glue-logic in long-lifecycle systems. With 48,000 gates, up to 108,000 system gates, and 81 I/O, one antifuse device can absorb dozens of legacy PAL/GAL/CPLD functions, and its one-time programming permanently fixes the configuration in silicon - no configuration memory to obsolesce. Engineers port legacy schematics into Microchip Libero, close timing, and program new SX-A devices to repair or extend the life of industrial, transportation, and defense platforms where redesigning around a modern FPGA would require costly full-board requalification.
Рекомендуется
Test and Measurement Equipment
Bench instruments, automated test fixtures, and production test heads use the A54SX32A-TQG100A for timing generation, pattern multiplexing, and interface adaptation. The 2,012 dedicated flip-flops support deep pipelining for pattern engines, and the 81 user I/O handle parallel fixture interfaces; the antifuse configuration loads instantly at power-up so test fixtures are ready with zero boot latency. Deterministic internal timing on the 0.25 um CMOS process simplifies correlation between test stations. Its single-chip integration also reduces fixture part count and improves long-term reproducibility across multiple fixture builds.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для A54SX32A-TQG100A — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | A54SX32A-TQG100I | A54SX32A-2TQG100 | A54SX16A-TQG100 |
|---|---|---|---|---|
| Package | 100-TQFP | 100-TQFP - same | 100-TQFP - same | 100-TQFP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 48,000 (up to 108,000 available) | 48,000 | 48,000 | 16,000 |
| Speed Grade | Standard (A grade) | Standard | -2 (faster) | Standard |
| Programming Technology | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) | Antifuse (OTP) |
Ключевые отличия
- Configuration security of antifuse technology (против A54SX32A-2TQG100)
- 48,000-gate capacity in the same 100-TQFP footprint (против A54SX16A-TQG100)
- Commercial grade pricing vs industrial variant (против A54SX32A-TQG100I)
Заметки по проектированию
Antifuse FPGAs are one-time programmable: once the A54SX32A-TQG100A is programmed, the design cannot be changed and the device cannot be reworked. Always complete gate-level simulation, timing closure, and hardware verification on a development device (or in Libero simulation) before programming production units. Given the 12-week lead time and non-stocked status at major distributors (per Mouser, as of 2026-09-03), a programming error can cost months of schedule. Order spare programmed devices.
The 100-TQFP has 0.5 mm pin pitch with leads on four sides; use a land pattern per the Microchip SX-A datasheet package drawing and keep trace widths adequate for 81 potential I/O assignments. Decouple each supply pin with 0.1 uF ceramics placed within 2 mm of the pin, plus bulk capacitance near the device. Since I/O assignment is user-defined in Libero, group switching signals to minimize simultaneous switching noise on shared return paths. Verify power and ground pin locations against the datasheet TQ100 pin tables before routing.
Estimated: antifuse FPGAs draw no static configuration current (no SRAM to hold), so power is dominated by dynamic switching of the routed logic and I/O. Estimate total power in Microchip Libero's power calculator using your toggle rates and I/O loading before fixing the board's supply budget; do not size the regulator from worst-case datasheet numbers alone, as heavily utilized designs on the SX-A die can differ substantially from lightly used ones.
Информация о соответствии
Lead Free Status: Lead Free; RoHS Status: RoHS Compliant per digchip datasheet summary for A54SX32A-TQG100. REACH, halogen-free, and conflict-minerals declarations not found in provided data.
