Analog Devices

AD534KHZ - 4-Quadrant Multiplier/Divider | Analog Devices

Артикул: AD534KHZ ✓ Активен
TO-100-10 metal can, 10 leads Package
MOQ: 1 |

AD534KHZ Обзор

Analog Devices AD534KHZ is a precision four-quadrant analog multiplier/divider built with monolithic, laser-trimmed construction and housed in a 10-lead TO-100 metal-can package. The device combines a multiplier/divider function with internally trimmed accuracy, low output noise of 90 µVrms over 10 Hz to 10 kHz, excellent supply rejection, low temperature coefficients, and strong long-term stability. It is intended for instrumentation and analog signal-processing systems that require accurate product or quotient calculations.

An analog multiplier is an integrated circuit that multiplies two voltage signals, while an analog divider divides one signal by another. A four-quadrant multiplier can process positive and negative inputs, allowing it to support control-system modulation, signal calibration, RMS measurement, modulation, demodulation, feedback compensation, and precision analog computation. The AD534 belongs to the broader analog IC and amplifier hierarchy, combining signal conditioning and mathematical computation in one device.

The AD534KHZ uses monolithic laser trimming to establish its internal calibration. This construction is relevant because trimming minimizes the need for external adjustment and supports repeatable performance across production units. Its documented output-noise performance of 90 µVrms from 10 Hz to 10 kHz is suitable for systems in which multiplier noise contributes directly to the accuracy of the calculated result. Excellent supply rejection helps preserve accuracy when the operating supply changes.

Low temperature coefficients and excellent long-term stability are important in precision measurement systems because analog gain and offset errors can drift with environmental changes and component aging. The TO-100-10 package provides through-hole construction, mechanical robustness, and useful thermal mass compared with many small surface-mount packages. The metal enclosure also provides environmental shielding around the sensitive analog circuitry and can assist with heat dissipation.

Typical uses include closed-loop control, analog signal calculation, precision test equipment, laboratory instrumentation, feedback-loop compensation, and modulation or demodulation circuits. Because the AD534 supports four-quadrant operation, bipolar control signals can be processed without requiring the system designer to split every calculation into separate positive and negative paths. The device is also suitable for gain-control and transducer-signal-conditioning arrangements where scaling accuracy is important.

When implementing the AD534KHZ, follow the manufacturer datasheet for the complete pin description, input and output ranges, supply limits, bandwidth, settling behavior, and external component requirements. Keep sensitive input and output routing short, maintain the recommended bypass capacitance, and avoid unnecessary loading around the multiplier terminals. Confirm stability over the complete input, output, load, and temperature range of the intended system before production release.

This page combines the verified AD534KHZ product identity, pricing context, package information, same-family alternatives, technical comparisons, and practical selection guidance. It supports engineers who need a precise four-quadrant multiplier/divider in a robust TO-100-10 package while keeping procurement and design decisions in one technical reference.

Аналоги без доработки для AD534KHZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

AD534KH

✅ Прямая замена ⚠️ Характеристики не проверены
📦 TO-100-10
Same four-quadrant multiplier/divider function and TO-100-10 arrangement; ordering-code parameters may differ by no more than 30%.

📋 Справочный аналог (нет в каталоге)

AD534JH

✅ Прямая замена ⚠️ Характеристики не проверены
📦 TO-100-10
Same four-quadrant multiplier/divider function and TO-100-10 arrangement; grade-specific limits remain within 30% of the core electrical ratings.

📋 Справочный аналог (нет в каталоге)

AD534SH

✅ Прямая замена ⚠️ Характеристики не проверены
Analog Devices
📦 TO-100-10
Monolithic precision four-quadrant multiplier/divider · AD534 · Production · Internal laser trimming · 4 quadrants · 4 bits · TO-100-10 metal can · 10 pins

Уточнить цену

Открыть даташит →

AD534TH

✅ Прямая замена ⚠️ Характеристики не проверены
Analog Devices
📦 TO-100-10
Four-quadrant analog multiplier and divider · Monolithic · Laser trimmed · On-chip buried-Zener reference · 10 V · 4 quadrants · TO-100-10 metal-header package · 10 pins

Уточнить цену

Открыть даташит →

AD534S

✅ Прямая замена ⚠️ Характеристики не проверены
📦 TO-100-10
Same monolithic four-quadrant multiplier/divider function and TO-100-10 arrangement; grade and ordering suffix account for differences within 30%.

📋 Справочный аналог (нет в каталоге)

AD534KHZ Максимальные параметры и электрические характеристики

Функция 4-quadrant analog multiplier/divider
Multiplier Quadrants 4 quadrants
Construction Monolithic, laser-trimmed integrated circuit
Выходной шум 90 µVrms
Noise Bandwidth 10 Hz to 10 kHz
Long-Term Stability Excellent, as characterized by Analog Devices
Корпус TO-100-10 metal can, 10 leads
Тип монтажа Through-hole
Packaging Tube
Статус RoHS RoHS compliant
Lead-Free Status Lead free
Статус жизненного цикла Production

Руководство по цоколевке AD534KHZ в корпусе to-100-10 metal can, 10 leads

Цоколевка для AD534KHZ (корпус to-100-10 metal can, 10 leads). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса to-100-10 metal can, 10 leads для AD534KHZ

Нет подробных данных о распиновке для AD534KHZ.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

AD534KHZ подходит для 6 применениеs: Precision Feedback Control, Analog Signal Calibration, RMS and Power Measurement, Modulation and Demodulation, Sensor Signal Conditioning, Precision Test and Measurement.

🏭

Precision Feedback Control

The AD534KHZ is well suited to closed-loop control because it performs multiplication and division across four input quadrants, supporting bipolar error and control signals. A designer can place it in the forward path to calculate a compensation term, scale a command, or form a ratio from sensed variables. Its internally trimmed monolithic construction, excellent supply rejection, and low temperature coefficients help maintain loop behavior as supply and environmental conditions change. The 90 µVrms noise over 10 Hz to 10 kHz also limits added noise around the calculated control signal. Use the manufacturer application circuits to establish compensation values, and keep the multiplier inputs, feedback path, and bypass connections compact.

🔧

Analog Signal Calibration

The AD534KHZ can scale one analog measurement by a calibration coefficient or command signal, making it useful in laboratory and production-test equipment. Four-quadrant operation permits either sign of the scaling factor and reduces circuit complexity compared with separate positive and negative multiplication paths. The device's laser-trimmed monolithic construction supports internal calibration, while its documented 90 µVrms noise provides a defined low-noise contribution from 10 Hz to 10 kHz. Excellent supply rejection is valuable when precision calibration must remain stable near power-conversion equipment. Validate gain accuracy and output linearity across the intended measurement range, and observe the manufacturer recommendations for bypass capacitors and signal grounding.

📊

RMS and Power Measurement

An analog multiplier is frequently used in RMS and power-measurement signal paths, and the AD534KHZ provides the four-quadrant arithmetic needed to combine bipolar measurement signals with scaling factors. Its low output noise of 90 µVrms over 10 Hz to 10 kHz is important when the multiplier output represents a small calculated value. Low temperature coefficients and excellent long-term stability also help preserve measurement consistency. The device can be used as the analog computing element in meter and test-instrument front ends, subject to the bandwidth and accuracy limits specified by Analog Devices. Input conditioning, isolation, and calibration circuitry remain separate system requirements and should not be inferred from the multiplier rating alone.

🌐

Modulation and Demodulation

The AD534KHZ can implement analog modulation by multiplying a message or sensor signal with a bipolar carrier, allowing the product to be filtered and recovered by a demodulator. Its four-quadrant operation supports carriers of either polarity, while excellent supply rejection helps prevent supply variation from appearing as unwanted modulation in the result. The documented 90 µVrms noise and internally trimmed construction make the device appropriate for precision modulation paths rather than only switching or power applications. Board layout should minimize loop area around the multiplier, maintain a stable reference, and prevent high-current digital or switching nodes from coupling into the sensitive input and output traces.

🧩

Sensor Signal Conditioning

The AD534KHZ can combine a sensor-derived signal with a scale factor, setpoint, or correction coefficient to produce a conditioned analog output. This arrangement is useful in pressure, position, force, and temperature acquisition systems where the sensor output must be normalized before conversion or control. The low temperature coefficients, excellent long-term stability, and excellent supply rejection help the conditioned result remain stable across supply changes and environmental drift. Four-quadrant operation accommodates positive and negative corrections without splitting the signal path. The signal source must remain within the device's input range, and the complete chain should be checked for offset, bandwidth, loading, and grounding effects in addition to multiplier accuracy.

🖥️

Precision Test and Measurement

The AD534KHZ can perform ratio calculations, programmable scaling, and analog signal multiplication inside precision test equipment. Its monolithic laser-trimmed construction reduces reliance on manual calibration, while 90 µVrms output noise over 10 Hz to 10 kHz supports measurement channels where amplifier or multiplier noise sets the usable resolution. Excellent supply rejection improves behavior near switching power supplies, provided the device receives the supply filtering and bypassing specified by the manufacturer. The robust TO-100-10 metal-can package is particularly convenient for instrument panels and through-hole analog boards. Validation should include full-scale error, linearity, temperature drift, reference stability, and settling across the selected measurement bandwidth.

Сводка рекомендуемых товаров

AD534KH Same-family four-quadrant multiplier/divider Используется в: Precision Feedback Control, RMS and Power Measurement, Sensor Signal Conditioning AD534S AD534-family precision multiplier/divider option Используется в: Precision Feedback Control, Modulation and Demodulation, Precision Test and Measurement AD534JH Same-family multiplier/divider for calibration circuits Используется в: Analog Signal Calibration, Modulation and Demodulation AD534SH Same-family precision multiplier/divider Используется в: Analog Signal Calibration, Sensor Signal Conditioning AD534TH Same-family four-quadrant multiplier/divider Используется в: RMS and Power Measurement, Precision Test and Measurement
What is the AD534KHZ?
The AD534KHZ is a precision four-quadrant analog multiplier/divider in a 10-lead TO-100 metal-can package. Analog Devices describes it as a monolithic, laser-trimmed device combining multiplier/divider operation with excellent supply rejection, low temperature coefficients, and excellent long-term stability. According to the Analog Devices AD534 product page, its low output noise is 90 µVrms from 10 Hz to 10 kHz.
What can the AD534KHZ be used for?
The AD534KHZ can perform analog multiplication and division with positive or negative input signals in closed-loop control, signal calibration, RMS measurement, modulation, demodulation, feedback compensation, and precision test equipment. Its four-quadrant operation lets designers process bipolar control signals without splitting each calculation into separate positive and negative paths. The manufacturer identifies the AD534 family as a monolithic, internally trimmed precision multiplier/divider.
What are the key specifications of AD534KHZ that engineers should know?
The principal documented characteristics are four-quadrant analog multiplier/divider operation, monolithic laser-trimmed construction, 90 µVrms output noise from 10 Hz to 10 kHz, excellent supply rejection, low temperature coefficients, excellent long-term stability, and a 10-lead TO-100-10 metal-can package. The Analog Devices AD534 product page also identifies the AD534 family as being in production.
Where can I download the AD534KHZ datasheet PDF?
The official AD534KHZ datasheet PDF is available from Analog Devices at the AD534 datasheet link on this page. Use the manufacturer document for the complete electrical characteristics, pin description, supply requirements, typical application circuits, and performance curves. The official product page also provides the current AD534 family documentation and ordering information.
Where is the AD534KHZ pinout located?
The AD534KHZ pinout is shown in the Analog Devices AD534 manufacturer datasheet, using the 10-lead TO-100 package drawing. Before assigning PCB connections, use the pin-description table and application circuits in that document because the multiplier/divider terminals include input, output, reference, supply, and compensation-related connections that must be wired according to the specified operating topology.
How does the AD534KHZ differ from a conventional multiplier?
The AD534KHZ is a monolithic, internally laser-trimmed four-quadrant multiplier/divider rather than a discrete multiplier built from operational amplifiers and precision resistors. Its 90 µVrms noise over 10 Hz to 10 kHz, excellent supply rejection, low temperature coefficients, and long-term stability support accurate analog calculations. The TO-100-10 metal package also provides a mechanically robust through-hole implementation.
AD534KHZ vs AD633JRZ - which multiplier is easier to use in a new design?
The AD534KHZ is the relevant choice when an existing TO-100-10 footprint and a precision four-quadrant multiplier/divider are required. The AD633JRZ is also a four-quadrant analog multiplier, but it uses a different package and therefore requires a different PCB footprint. The AD633JRZ also lacks the verified division-function positioning associated with the AD534KHZ for designs that specifically require multiplication and division.
AD534KHZ vs AD633ARZ - can either device replace the other?
No. The AD534KHZ and AD633ARZ are not drop-in replacements for one another because they use different packages, and the verified cross-reference material does not establish a pin-to-pin-compatible footprint. The AD534KHZ is a 10-lead TO-100 multiplier/divider, while the AD633ARZ is a four-quadrant multiplier with a different package and specified output architecture. PCB and signal-level changes would therefore be necessary.
When should I choose the AD534KHZ over another AD534-family device?
Choose the AD534KHZ when the design requires a four-quadrant multiplier/divider, a TO-100-10 footprint, and the grade identified by the KHZ ordering code. Other AD534-family members share the core function but may differ in electrical grade, temperature range, or ordering suffix. Confirm those parameters against the manufacturer ordering guide and datasheet before assigning them as a replacement.
Is the AD534KHZ suitable for precision instrumentation?
The AD534KHZ is suitable for precision instrumentation because Analog Devices specifies 90 µVrms output noise from 10 Hz to 10 kHz, excellent supply rejection, low temperature coefficients, excellent long-term stability, and internal laser trimming. These characteristics help preserve calculation accuracy in control, calibration, measurement, and signal-conditioning systems. Final suitability still depends on the required accuracy, bandwidth, temperature range, and supply conditions.
What is the best drop-in replacement for the AD534KHZ?
The closest same-family choices are AD534-family members that use the TO-100-10 arrangement, including AD534KH, AD534JH, AD534SH, and AD534TH. Their grade and ordering codes can change the electrical grade or temperature coverage, so a replacement must be checked against the original AD534KHZ ordering information, pinout, supply limits, and accuracy requirements. No verified cross-brand drop-in replacement was identified.
What can replace the AD534KHZ?
Same-family AD534 devices are the most practical replacement candidates because they use the monolithic four-quadrant multiplier/divider architecture. AD534KH, AD534JH, AD534SH, and AD534TH may share the relevant TO-100-10 family arrangement, but their suffix-specific grade and temperature limits must be verified before substitution. No cross-brand equivalent in the reviewed cross-reference results is confirmed as a pin-to-pin drop-in replacement.
Is the AD534KHZ the same as the AD534S?
The AD534KHZ and AD534S belong to the AD534 multiplier/divider family, but they should not be treated as automatically interchangeable from the family relationship alone. Ordering suffixes can specify package construction, temperature grade, and electrical grade. Consult the Analog Devices product-selection table and ordering guide, then verify pin compatibility, supply range, accuracy, bandwidth, and temperature coverage before substitution.
Where can I buy AD534KHZ online and what is its price?
The AD534KHZ can be requested through the Request a Quote form on this page, where current commercial availability, quantity, and lead time can be addressed with the supplier. The component is identified as a production Analog Devices device in a TO-100-10 package. Stock and price should be confirmed for the exact AD534KHZ suffix rather than relying on a broader AD534 family listing.
Is AD534KHZ in stock and what is its lead time?
Current AD534KHZ stock and lead time should be confirmed through the Request a Quote form on this page using the exact suffix AD534KHZ. Analog Devices lists the AD534 family as production, but production status does not by itself guarantee immediate inventory or a fixed delivery interval. The quote request allows quantity, tube packaging, and required delivery timing to be confirmed before an order is placed.
Does the AD534KHZ comply with RoHS and lead-free requirements?
The AD534KHZ is identified as RoHS compliant and lead free in its component listing. According to the AD534KHZ specification summary, the TO-100-10 metal-can device is supplied in tubes and carries lead-free status. REACH, halogen-free, conflict-minerals, and AEC-Q100 status are not established by that listing and should be confirmed through the manufacturer or the applicable supply documentation.

Справочные инженерные данные для AD534KHZ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the AD534KHZ when a design needs a precision four-quadrant multiplier/divider, low-noise analog arithmetic, and a 10-lead TO-100-10 footprint. Its 90 µVrms output noise, internal laser trimming, excellent supply rejection, and strong long-term stability make it appropriate for control loops, calibration circuits, measurement systems, and modulation stages. Select AD534KH, AD534JH, AD534SH, or AD534TH when one of their grade-specific electrical or temperature characteristics better matches the design, but verify the ordering information before making a substitution. AD534S belongs to the same product family and can be considered when its grade and package details match the requirements. The AD633JRZ and AD633ARZ are four-quadrant multipliers, not confirmed drop-in replacements, because their packages and signal architecture differ. For any new precision design, compare the required input range, supply range, bandwidth, gain accuracy, linearity, temperature coverage, and output loading against the manufacturer datasheet rather than selecting solely by multiplier function.

Сравнение с аналогами

Параметр Этот товар AD534KH AD534JH AD534SH AD534TH AD534S
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package TO-100-10 TO-100-10 TO-100-10 TO-100-10 TO-100-10 TO-100-10
Function 4-quadrant analog multiplier/divider 4-quadrant analog multiplier/divider 4-quadrant analog multiplier/divider 4-quadrant analog multiplier/divider 4-quadrant analog multiplier/divider 4-quadrant analog multiplier/divider
Construction Monolithic, laser-trimmed Monolithic, laser-trimmed Monolithic, laser-trimmed Monolithic, laser-trimmed Monolithic, laser-trimmed Monolithic, laser-trimmed

Ключевые отличия

  • Combines four-quadrant multiplication and division in a single precision device (против AD633ARZ)
  • Maintains a conventional TO-100-10 through-hole footprint (против AD633JRZ)
  • Internally trimmed monolithic construction reduces external adjustment requirements (против AD534S)
  • Low-noise precision operation supports sensitive measurement paths (против AD633JRZ)

Заметки по проектированию

Use the manufacturer pin-description table when assigning the 10 TO-100 leads, and route the multiplier inputs, reference connection, output, and supply pins according to the datasheet application circuit. Keep sensitive analog traces short and away from switching nodes, relay contacts, inductors, and high-current return paths. A continuous ground plane and carefully placed bypass capacitors will reduce coupling into the precision arithmetic stage.

Preserve the intended signal polarity and common-mode conditions at the X and Y inputs because the AD534KHZ supports four-quadrant operation. Incorrect input limiting, loading, or reference grounding can appear as gain and nonlinearity error even when the multiplier itself operates correctly. Follow the manufacturer input impedance and reference requirements, terminate unused inputs as directed, and evaluate channel-to-channel isolation where accurate ratios or low-error products are required.

Provide the supply bypassing and decoupling specified by the Analog Devices datasheet, with the shortest practical path from the device supply pins to the ground reference. Because excellent supply rejection is a defining AD534 characteristic, bypassing should be treated as part of preserving that performance rather than as optional EMC housekeeping. Verify startup, shutdown, and supply-range behavior across all operating modes used by the instrumentation or control system.

The TO-100-10 metal-can construction offers mechanical robustness and a useful thermal path, but the allowable internal dissipation still depends on the ambient temperature, lead length, PCB copper, and airflow. Estimate the worst-case dissipation using the actual operating voltage, current, and output swing, then compare the resulting junction temperature with the manufacturer limit. Avoid placing the device beside heat sources when its accuracy requirement is high.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Yes
Без галогенов
Unknown
Конфликтные минералы
Unknown

The component listing identifies AD534KHZ as RoHS compliant and lead free. No qualification or declaration for REACH, halogen-free status, conflict minerals, or AEC-Q100 was identified.

Данные проверены: 2026-11-18 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

AD534KHZ datasheet AD534KHZ pinout AD534KHZ datasheet pdf AD534KHZ TO-100-10 AD534KHZ analog multiplier AD534KHZ 4-quadrant multiplier divider AD534KHZ drop-in replacement AD534KHZ cross reference AD534KHZ vs AD633JRZ AD534KHZ vs AD633ARZ AD534KHZ price AD534KHZ stock Analog Devices AD534KHZ AD534KHZ application circuit AD534KHZ equivalent

Связанные компоненты & термины

Analog Devices AD534KHZ AD534KH AD534JH AD534SH AD534TH AD534S AD633JRZ AD633ARZ analog multiplier analog divider four-quadrant multiplier analog IC amplifier IC precision signal conditioning monolithic construction laser trimming TO-100-10 TO-100 metal can through-hole package 90 µVrms output noise supply rejection temperature coefficient long-term stability closed-loop control
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ