AD534KHZ - 4-Quadrant Multiplier/Divider | Analog Devices
부품 번호: AD534KHZ ✓ 활성AD534KHZ 개요
An analog multiplier is an integrated circuit that multiplies two voltage signals, while an analog divider divides one signal by another. A four-quadrant multiplier can process positive and negative inputs, allowing it to support control-system modulation, signal calibration, RMS measurement, modulation, demodulation, feedback compensation, and precision analog computation. The AD534 belongs to the broader analog IC and amplifier hierarchy, combining signal conditioning and mathematical computation in one device.
The AD534KHZ uses monolithic laser trimming to establish its internal calibration. This construction is relevant because trimming minimizes the need for external adjustment and supports repeatable performance across production units. Its documented output-noise performance of 90 µVrms from 10 Hz to 10 kHz is suitable for systems in which multiplier noise contributes directly to the accuracy of the calculated result. Excellent supply rejection helps preserve accuracy when the operating supply changes.
Low temperature coefficients and excellent long-term stability are important in precision measurement systems because analog gain and offset errors can drift with environmental changes and component aging. The TO-100-10 package provides through-hole construction, mechanical robustness, and useful thermal mass compared with many small surface-mount packages. The metal enclosure also provides environmental shielding around the sensitive analog circuitry and can assist with heat dissipation.
Typical uses include closed-loop control, analog signal calculation, precision test equipment, laboratory instrumentation, feedback-loop compensation, and modulation or demodulation circuits. Because the AD534 supports four-quadrant operation, bipolar control signals can be processed without requiring the system designer to split every calculation into separate positive and negative paths. The device is also suitable for gain-control and transducer-signal-conditioning arrangements where scaling accuracy is important.
When implementing the AD534KHZ, follow the manufacturer datasheet for the complete pin description, input and output ranges, supply limits, bandwidth, settling behavior, and external component requirements. Keep sensitive input and output routing short, maintain the recommended bypass capacitance, and avoid unnecessary loading around the multiplier terminals. Confirm stability over the complete input, output, load, and temperature range of the intended system before production release.
This page combines the verified AD534KHZ product identity, pricing context, package information, same-family alternatives, technical comparisons, and practical selection guidance. It supports engineers who need a precise four-quadrant multiplier/divider in a robust TO-100-10 package while keeping procurement and design decisions in one technical reference.
드롭인 대체품: AD534KHZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
AD534KH
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
AD534JH
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
AD534SH
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →AD534TH
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →AD534S
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
AD534KHZ 최대 정격 & 전기적 특성
| 기능 | 4-quadrant analog multiplier/divider |
| Multiplier Quadrants | 4 quadrants |
| Construction | Monolithic, laser-trimmed integrated circuit |
| 출력 노이즈 | 90 µVrms |
| Noise Bandwidth | 10 Hz to 10 kHz |
| Long-Term Stability | Excellent, as characterized by Analog Devices |
| 패키지 | TO-100-10 metal can, 10 leads |
| 실장 유형 | Through-hole |
| Packaging | Tube |
| RoHS 상태 | RoHS compliant |
| Lead-Free Status | Lead free |
| 수명 주기 상태 | Production |
AD534KHZ to-100-10 metal can, 10 leads 핀 구성 가이드
AD534KHZ(to-100-10 metal can, 10 leads 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AD534KHZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AD534KHZ 적합 용도: 6 애플리케이션s: Precision Feedback Control, Analog Signal Calibration, RMS and Power Measurement, Modulation and Demodulation, Sensor Signal Conditioning, Precision Test and Measurement.
Precision Feedback Control
The AD534KHZ is well suited to closed-loop control because it performs multiplication and division across four input quadrants, supporting bipolar error and control signals. A designer can place it in the forward path to calculate a compensation term, scale a command, or form a ratio from sensed variables. Its internally trimmed monolithic construction, excellent supply rejection, and low temperature coefficients help maintain loop behavior as supply and environmental conditions change. The 90 µVrms noise over 10 Hz to 10 kHz also limits added noise around the calculated control signal. Use the manufacturer application circuits to establish compensation values, and keep the multiplier inputs, feedback path, and bypass connections compact.
추천
Analog Signal Calibration
The AD534KHZ can scale one analog measurement by a calibration coefficient or command signal, making it useful in laboratory and production-test equipment. Four-quadrant operation permits either sign of the scaling factor and reduces circuit complexity compared with separate positive and negative multiplication paths. The device's laser-trimmed monolithic construction supports internal calibration, while its documented 90 µVrms noise provides a defined low-noise contribution from 10 Hz to 10 kHz. Excellent supply rejection is valuable when precision calibration must remain stable near power-conversion equipment. Validate gain accuracy and output linearity across the intended measurement range, and observe the manufacturer recommendations for bypass capacitors and signal grounding.
추천
RMS and Power Measurement
An analog multiplier is frequently used in RMS and power-measurement signal paths, and the AD534KHZ provides the four-quadrant arithmetic needed to combine bipolar measurement signals with scaling factors. Its low output noise of 90 µVrms over 10 Hz to 10 kHz is important when the multiplier output represents a small calculated value. Low temperature coefficients and excellent long-term stability also help preserve measurement consistency. The device can be used as the analog computing element in meter and test-instrument front ends, subject to the bandwidth and accuracy limits specified by Analog Devices. Input conditioning, isolation, and calibration circuitry remain separate system requirements and should not be inferred from the multiplier rating alone.
추천
Modulation and Demodulation
The AD534KHZ can implement analog modulation by multiplying a message or sensor signal with a bipolar carrier, allowing the product to be filtered and recovered by a demodulator. Its four-quadrant operation supports carriers of either polarity, while excellent supply rejection helps prevent supply variation from appearing as unwanted modulation in the result. The documented 90 µVrms noise and internally trimmed construction make the device appropriate for precision modulation paths rather than only switching or power applications. Board layout should minimize loop area around the multiplier, maintain a stable reference, and prevent high-current digital or switching nodes from coupling into the sensitive input and output traces.
추천
Sensor Signal Conditioning
The AD534KHZ can combine a sensor-derived signal with a scale factor, setpoint, or correction coefficient to produce a conditioned analog output. This arrangement is useful in pressure, position, force, and temperature acquisition systems where the sensor output must be normalized before conversion or control. The low temperature coefficients, excellent long-term stability, and excellent supply rejection help the conditioned result remain stable across supply changes and environmental drift. Four-quadrant operation accommodates positive and negative corrections without splitting the signal path. The signal source must remain within the device's input range, and the complete chain should be checked for offset, bandwidth, loading, and grounding effects in addition to multiplier accuracy.
추천
Precision Test and Measurement
The AD534KHZ can perform ratio calculations, programmable scaling, and analog signal multiplication inside precision test equipment. Its monolithic laser-trimmed construction reduces reliance on manual calibration, while 90 µVrms output noise over 10 Hz to 10 kHz supports measurement channels where amplifier or multiplier noise sets the usable resolution. Excellent supply rejection improves behavior near switching power supplies, provided the device receives the supply filtering and bypassing specified by the manufacturer. The robust TO-100-10 metal-can package is particularly convenient for instrument panels and through-hole analog boards. Validation should include full-scale error, linearity, temperature drift, reference stability, and settling across the selected measurement bandwidth.
추천
추천 제품 요약
엔지니어링 참조 데이터: AD534KHZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AD534KH | AD534JH | AD534SH | AD534TH | AD534S |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | TO-100-10 | TO-100-10 | TO-100-10 | TO-100-10 | TO-100-10 | TO-100-10 |
| Function | 4-quadrant analog multiplier/divider | 4-quadrant analog multiplier/divider | 4-quadrant analog multiplier/divider | 4-quadrant analog multiplier/divider | 4-quadrant analog multiplier/divider | 4-quadrant analog multiplier/divider |
| Construction | Monolithic, laser-trimmed | Monolithic, laser-trimmed | Monolithic, laser-trimmed | Monolithic, laser-trimmed | Monolithic, laser-trimmed | Monolithic, laser-trimmed |
주요 차별점
- Combines four-quadrant multiplication and division in a single precision device (vs AD633ARZ)
- Maintains a conventional TO-100-10 through-hole footprint (vs AD633JRZ)
- Internally trimmed monolithic construction reduces external adjustment requirements (vs AD534S)
- Low-noise precision operation supports sensitive measurement paths (vs AD633JRZ)
설계 노트
Use the manufacturer pin-description table when assigning the 10 TO-100 leads, and route the multiplier inputs, reference connection, output, and supply pins according to the datasheet application circuit. Keep sensitive analog traces short and away from switching nodes, relay contacts, inductors, and high-current return paths. A continuous ground plane and carefully placed bypass capacitors will reduce coupling into the precision arithmetic stage.
Preserve the intended signal polarity and common-mode conditions at the X and Y inputs because the AD534KHZ supports four-quadrant operation. Incorrect input limiting, loading, or reference grounding can appear as gain and nonlinearity error even when the multiplier itself operates correctly. Follow the manufacturer input impedance and reference requirements, terminate unused inputs as directed, and evaluate channel-to-channel isolation where accurate ratios or low-error products are required.
Provide the supply bypassing and decoupling specified by the Analog Devices datasheet, with the shortest practical path from the device supply pins to the ground reference. Because excellent supply rejection is a defining AD534 characteristic, bypassing should be treated as part of preserving that performance rather than as optional EMC housekeeping. Verify startup, shutdown, and supply-range behavior across all operating modes used by the instrumentation or control system.
The TO-100-10 metal-can construction offers mechanical robustness and a useful thermal path, but the allowable internal dissipation still depends on the ambient temperature, lead length, PCB copper, and airflow. Estimate the worst-case dissipation using the actual operating voltage, current, and output swing, then compare the resulting junction temperature with the manufacturer limit. Avoid placing the device beside heat sources when its accuracy requirement is high.
규정 준수 정보
The component listing identifies AD534KHZ as RoHS compliant and lead free. No qualification or declaration for REACH, halogen-free status, conflict minerals, or AEC-Q100 was identified.