AD536ASE - True RMS-to-DC Converter, 0.09 MHz | Analog Devices
Артикул: AD536ASE ✓ АктивенAD536ASE Обзор
A true RMS-to-DC converter is a specialized analog signal-conditioning device within the broader RMS measurement, converter, and power-management IC hierarchy. It measures the energy-equivalent amplitude of a waveform rather than its average value. This distinction matters in industrial instrumentation, audio and communication systems, motor control, laboratory equipment, and power monitoring, where sinusoidal signals, pulse trains, and mixed-frequency waveforms must be measured with consistent scaling.
The AD536A family uses a laser-trimmed monolithic architecture to deliver specified conversion accuracy. Device grades provide different maximum error limits, including 0.2% for AD536AJ and 0.5% for AD536AK, allowing the system designer to select an accuracy grade appropriate for the measurement requirement. The AD536ASE is identified in the product documentation as a hermetically sealed LCC-20 device, making the package option suitable for applications that require a sealed ceramic package.
The AD536A computes the true RMS value of complex AC signals or signals containing a DC component and converts that result into a proportional DC output. The available comparison information identifies a 125 V input rating, approximately 2000 uA supply current, and 2300 kHz bandwidth for the AD536A family. These characteristics position it for precision analog measurement rather than high-speed signal capture or waveform reconstruction.
Typical uses include AC voltage measurement in industrial panels, RMS monitoring in power supplies, audio-programme level detection, motor-drive feedback, and laboratory instrumentation. Its sealed ceramic package can also support equipment intended for harsh environments when the complete assembly, solder joints, contamination control, and thermal design satisfy the manufacturer's application requirements.
When designing the AD536ASE, follow the manufacturer's application circuit and pin-description table for input scaling, output filtering, supply bypassing, and grounding. The input and output networks directly influence accuracy and settling behavior, so component tolerances and layout should be treated as part of the measurement system rather than as incidental supporting parts.
This product record combines the manufacturer specifications, package identification, pricing references, comparison criteria, and engineering guidance needed to evaluate the AD536ASE as a true RMS measurement front end. It also distinguishes true drop-in family options from mechanically different package variants so that replacement decisions remain based on verified electrical and pin compatibility.
Аналоги без доработки для AD536ASE — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
AD536ASE/883B
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD536AJDZ
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
AD536AKDZ
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
AD536AYZ
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
AD536ASE Максимальные параметры и электрические характеристики
| Функция | True RMS-to-DC conversion |
| Input Signal Capability | Complex AC or AC-plus-DC waveforms |
| Operating Frequency | 0.09 MHz |
| Maximum Input Voltage | 125 V |
| Ток потребления | 2000 uA |
| Bandwidth | 2300 kHz |
| AD536AJ Maximum Conversion Error | 0.2% maximum |
| AD536AK Maximum Conversion Error | 0.5% maximum |
| Architecture | Monolithic laser-trimmed true RMS converter |
| Корпус | Hermetically sealed LCC-20 ceramic leaded chip carrier |
| Package Type | CQCC-20 |
| Package Dimensions | 9 mm x 9 mm |
| Тип монтажа | Through-hole ceramic leaded package |
| Тип выхода | Proportional DC output representing true RMS value |
Руководство по цоколевке AD536ASE в корпусе 9 mm x 9 mm
Цоколевка для AD536ASE (корпус 9 mm x 9 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для AD536ASE.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
AD536ASE подходит для 6 применениеs: Industrial AC Voltage Monitoring, Power Supply Load Monitoring, Audio Programme Level Detection, Motor Drive Feedback, Laboratory Instrumentation, Communications Power Monitoring.
Industrial AC Voltage Monitoring
The AD536ASE suits industrial voltage-monitoring modules that must report the true RMS level of sine waves, distorted AC, or variable-frequency power signals. Its monolithic true RMS conversion is more consistent than average rectification when crest factor changes, while the 125 V maximum input rating provides a useful upper boundary for the measurement chain. The hermetically sealed LCC-20 ceramic package is appropriate for a protected panel assembly. Designers should add the required input attenuation, surge protection, filtering, and isolation rather than applying the full input rating directly to the IC.
Рекомендуется
Power Supply Load Monitoring
The AD536ASE can form the measurement front end of a power-supply controller that monitors AC input or converter output activity. True RMS measurement provides an amplitude that remains meaningful for non-sinusoidal switch-mode-related waveforms, unlike an average detector that underreports their effective level. The AD536A family's approximately 2300 kHz bandwidth supports the measurement bandwidth needed in many monitoring circuits, while the 125 V input rating covers suitably scaled high-voltage rails. Calibration and input conditioning remain essential for achieving useful system accuracy.
Рекомендуется
Audio Programme Level Detection
The AD536ASE is appropriate for broadcast, recording, and installed-audio equipment that needs a DC control signal representing programme RMS level. Unlike a peak detector or average rectifier, the true RMS converter responds to changes in waveform crest factor and therefore follows perceived or thermal stress more consistently across varied programme material. The AD536A family's 2300 kHz bandwidth covers the audio-relevant measurement range, and the 20-pin ceramic package supports a robust through-hole implementation. The design should use the manufacturer's filtering and scaling network to set the intended bandwidth and response.
Рекомендуется
Motor Drive Feedback
The AD536ASE can provide RMS feedback in industrial motor-drive and inverter monitoring subsystems where phase current or voltage contains harmonic content. A true RMS measurement is more useful than an average rectifier when the waveform shape changes with motor loading, switching activity, or regenerative conditions. The converter's 125 V input ceiling and approximately 2300 kHz family bandwidth allow it to participate in appropriately scaled sensing networks. Electrical isolation, current-shunt or divider design, and protection from switching transients must be addressed separately from the converter itself.
Рекомендуется
Laboratory Instrumentation
The AD536ASE is useful in bench instruments and automated test equipment that require repeatable RMS indication for arbitrary AC waveforms. Its monolithic laser-trimmed construction combines the converter and compensation circuitry in one package, reducing the need for a modular RMS module. The 20-pin hermetically sealed ceramic package supports long-life through-hole assemblies, while the AD536A family's approximately 2000 uA supply current is suitable for many low-power measurement channels. Instrument accuracy also depends on reference calibration, component tolerances, grounding, and the selected AD536A accuracy grade.
Рекомендуется
Communications Power Monitoring
The AD536ASE can support power-rail and converter monitoring in communications equipment where measured waveforms may contain harmonics or pulsed loading. Its true RMS operation produces a more representative DC level than average rectification, helping a controller distinguish effective load from peak excursions. The AD536A family's 2300 kHz bandwidth and 125 V input rating fit many protected measurement channels, while the hermetically sealed LCC-20 package accommodates industrial environmental assembly. The input divider, transient protection, and filter must be selected for the specific power bus and waveform bandwidth.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AD536ASE — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AD536ASE/883B | AD536AJDZ | AD536AKDZ | AD536AYZ |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | LCC-20 | LCC-20 - same | LCC-20 - same | LCC-20 - same | LCC-20 - same |
| Function | True RMS-to-DC converter | True RMS-to-DC converter | True RMS-to-DC converter | True RMS-to-DC converter | True RMS-to-DC converter |
| Maximum Input Voltage | 125 V | 125 V | 125 V | 125 V | 125 V |
| Qualification Suffix | Standard AD536ASE suffix | 883B qualification suffix | AJ accuracy and package suffix | AK accuracy and package suffix | AY grade and package suffix |
Ключевые отличия
- Provides true RMS measurement rather than average rectification (против AD536ASE/883B)
- Higher accuracy option exists within the same ceramic-package family (против AD536AJDZ)
- Maintains the same measurement core and package (против AD536AKDZ)
Заметки по проектированию
Use the manufacturer's application circuit as the baseline for input scaling, output filtering, supply bypassing, and grounding. Keep the high-impedance converter node and feedback components away from switching traces and inductive elements. The hermetically sealed LCC-20 package protects the die, but it does not protect against conductive board contamination; maintain suitable cleanliness and guard sensitive nodes where high input impedance is required.
Do not substitute an average-rms or peak-detector calculation for true RMS behavior when the input waveform is non-sinusoidal. Confirm the converter's 0.09 MHz operating frequency, approximately 2300 kHz bandwidth, and external filter settings against the signal bandwidth. If the source waveform contains switching spikes outside the intended measurement band, remove those components before the converter rather than relying on excessive input attenuation.
Estimated: using a 5 V supply and the identified 2000 uA supply current, the AD536ASE core dissipates approximately 0.010 W. Verify the actual supply voltage, external-network loading, and maximum ambient temperature before relying on this estimate. Because the device uses a hermetically sealed ceramic package, its thermal path differs from a plastic SMD package and should be evaluated against the manufacturer's specified operating conditions.
Информация о соответствии
The exact-suffix compliance declarations were not established by the product documentation excerpts. Request current RoHS, REACH, lead-free, halogen-free, conflict-minerals, and qualification documents through the Request a Quote form.