Analog Devices

AD536ASE - True RMS-to-DC Converter, 0.09 MHz | Analog Devices

料号: AD536ASE ✓ 量产中
125 V Vdss 2000 uA Id Hermetically sealed LCC-20 ceramic leaded chip carrier Package 0.09 MHz Speed
最小起订量: 1 |

AD536ASE 概述

The Analog Devices AD536ASE is a true RMS-to-DC converter with an operating frequency of 0.09 MHz, a 125 V maximum input rating, and a hermetically sealed 20-pin ceramic leaded chip carrier package. It converts complex AC or AC-plus-DC waveforms into an equivalent DC voltage representing the true root-mean-square value. Unlike an average rectifier, true RMS measurement responds consistently to the heating effect and power content of waveforms whose crest factor changes over time.

A true RMS-to-DC converter is a specialized analog signal-conditioning device within the broader RMS measurement, converter, and power-management IC hierarchy. It measures the energy-equivalent amplitude of a waveform rather than its average value. This distinction matters in industrial instrumentation, audio and communication systems, motor control, laboratory equipment, and power monitoring, where sinusoidal signals, pulse trains, and mixed-frequency waveforms must be measured with consistent scaling.

The AD536A family uses a laser-trimmed monolithic architecture to deliver specified conversion accuracy. Device grades provide different maximum error limits, including 0.2% for AD536AJ and 0.5% for AD536AK, allowing the system designer to select an accuracy grade appropriate for the measurement requirement. The AD536ASE is identified in the product documentation as a hermetically sealed LCC-20 device, making the package option suitable for applications that require a sealed ceramic package.

The AD536A computes the true RMS value of complex AC signals or signals containing a DC component and converts that result into a proportional DC output. The available comparison information identifies a 125 V input rating, approximately 2000 uA supply current, and 2300 kHz bandwidth for the AD536A family. These characteristics position it for precision analog measurement rather than high-speed signal capture or waveform reconstruction.

Typical uses include AC voltage measurement in industrial panels, RMS monitoring in power supplies, audio-programme level detection, motor-drive feedback, and laboratory instrumentation. Its sealed ceramic package can also support equipment intended for harsh environments when the complete assembly, solder joints, contamination control, and thermal design satisfy the manufacturer's application requirements.

When designing the AD536ASE, follow the manufacturer's application circuit and pin-description table for input scaling, output filtering, supply bypassing, and grounding. The input and output networks directly influence accuracy and settling behavior, so component tolerances and layout should be treated as part of the measurement system rather than as incidental supporting parts.

This product record combines the manufacturer specifications, package identification, pricing references, comparison criteria, and engineering guidance needed to evaluate the AD536ASE as a true RMS measurement front end. It also distinguishes true drop-in family options from mechanically different package variants so that replacement decisions remain based on verified electrical and pin compatibility.

直接替换替代料: AD536ASE ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

AD536ASE/883B

✅ 直接替换
📦 LCC-20
Uses the same true RMS converter and CLCC-20 package; published family ratings match at 125 V input, 2000 uA supply current, and 2300 kHz bandwidth, but the 883B procurement grade must be verified.

📋 参考替代料(不在目录中)

AD536AJDZ

✅ 直接替换 ⚠️ 规格未核验
📦 LCC-20
AD536AJ is specified at 0.2% maximum conversion error, 0.3 percentage points better than the 0.5% AD536AK grade, while retaining the 20-pin ceramic converter package.

📋 参考替代料(不在目录中)

AD536AKDZ

✅ 直接替换 ⚠️ 规格未核验
📦 LCC-20
Uses the 0.5% maximum-error AD536AK grade and the same 20-pin ceramic package; the core 125 V, 2000 uA, and 2300 kHz family ratings remain applicable.

📋 参考替代料(不在目录中)

AD536AYZ

✅ 直接替换 ⚠️ 规格未核验
📦 LCC-20
Retains the AD536A true RMS core and 20-pin ceramic footprint; grade-specific error and temperature limits differ by 0 to 0.3 percentage points from the 0.5% AD536AK grade.

📋 参考替代料(不在目录中)

AD536ASE 最大额定值与电气特性

功能 True RMS-to-DC conversion
Input Signal Capability Complex AC or AC-plus-DC waveforms
Operating Frequency 0.09 MHz
Maximum Input Voltage 125 V
电源电流 2000 uA
Bandwidth 2300 kHz
AD536AJ Maximum Conversion Error 0.2% maximum
AD536AK Maximum Conversion Error 0.5% maximum
Architecture Monolithic laser-trimmed true RMS converter
封装 Hermetically sealed LCC-20 ceramic leaded chip carrier
Package Type CQCC-20
Package Dimensions 9 mm x 9 mm
安装类型 Through-hole ceramic leaded package
输出类型 Proportional DC output representing true RMS value

AD536ASE 9 mm x 9 mm 引脚配置指南

AD536ASE(9 mm x 9 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

AD536ASE 的 9 mm x 9 mm 封装引脚图

暂无详细引脚数据: AD536ASE.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AD536ASE 适用于 6 应用s: Industrial AC Voltage Monitoring, Power Supply Load Monitoring, Audio Programme Level Detection, Motor Drive Feedback, Laboratory Instrumentation, Communications Power Monitoring.

🏭

Industrial AC Voltage Monitoring

The AD536ASE suits industrial voltage-monitoring modules that must report the true RMS level of sine waves, distorted AC, or variable-frequency power signals. Its monolithic true RMS conversion is more consistent than average rectification when crest factor changes, while the 125 V maximum input rating provides a useful upper boundary for the measurement chain. The hermetically sealed LCC-20 ceramic package is appropriate for a protected panel assembly. Designers should add the required input attenuation, surge protection, filtering, and isolation rather than applying the full input rating directly to the IC.

⚡

Power Supply Load Monitoring

The AD536ASE can form the measurement front end of a power-supply controller that monitors AC input or converter output activity. True RMS measurement provides an amplitude that remains meaningful for non-sinusoidal switch-mode-related waveforms, unlike an average detector that underreports their effective level. The AD536A family's approximately 2300 kHz bandwidth supports the measurement bandwidth needed in many monitoring circuits, while the 125 V input rating covers suitably scaled high-voltage rails. Calibration and input conditioning remain essential for achieving useful system accuracy.

🎧

Audio Programme Level Detection

The AD536ASE is appropriate for broadcast, recording, and installed-audio equipment that needs a DC control signal representing programme RMS level. Unlike a peak detector or average rectifier, the true RMS converter responds to changes in waveform crest factor and therefore follows perceived or thermal stress more consistently across varied programme material. The AD536A family's 2300 kHz bandwidth covers the audio-relevant measurement range, and the 20-pin ceramic package supports a robust through-hole implementation. The design should use the manufacturer's filtering and scaling network to set the intended bandwidth and response.

🏭

Motor Drive Feedback

The AD536ASE can provide RMS feedback in industrial motor-drive and inverter monitoring subsystems where phase current or voltage contains harmonic content. A true RMS measurement is more useful than an average rectifier when the waveform shape changes with motor loading, switching activity, or regenerative conditions. The converter's 125 V input ceiling and approximately 2300 kHz family bandwidth allow it to participate in appropriately scaled sensing networks. Electrical isolation, current-shunt or divider design, and protection from switching transients must be addressed separately from the converter itself.

🔧

Laboratory Instrumentation

The AD536ASE is useful in bench instruments and automated test equipment that require repeatable RMS indication for arbitrary AC waveforms. Its monolithic laser-trimmed construction combines the converter and compensation circuitry in one package, reducing the need for a modular RMS module. The 20-pin hermetically sealed ceramic package supports long-life through-hole assemblies, while the AD536A family's approximately 2000 uA supply current is suitable for many low-power measurement channels. Instrument accuracy also depends on reference calibration, component tolerances, grounding, and the selected AD536A accuracy grade.

🌐

Communications Power Monitoring

The AD536ASE can support power-rail and converter monitoring in communications equipment where measured waveforms may contain harmonics or pulsed loading. Its true RMS operation produces a more representative DC level than average rectification, helping a controller distinguish effective load from peak excursions. The AD536A family's 2300 kHz bandwidth and 125 V input rating fit many protected measurement channels, while the hermetically sealed LCC-20 package accommodates industrial environmental assembly. The input divider, transient protection, and filter must be selected for the specific power bus and waveform bandwidth.

推荐产品汇总

AD536ASE/883B Same-family true RMS converter for a qualified 20-pin ceramic assembly 用于: Industrial AC Voltage Monitoring, Audio Programme Level Detection, Communications Power Monitoring AD536AJDZ Higher-accuracy AD536A family option 用于: Industrial AC Voltage Monitoring, Audio Programme Level Detection, Motor Drive Feedback, Laboratory Instrumentation AD536AKDZ AD536A true RMS converter with a 0.5% maximum-error grade 用于: Power Supply Load Monitoring, Motor Drive Feedback, Laboratory Instrumentation AD536AYZ Same-family ceramic-package option for grade-specific designs 用于: Power Supply Load Monitoring, Communications Power Monitoring
What is the AD536ASE?
The AD536ASE is a monolithic true RMS-to-DC converter from Analog Devices that converts complex AC or AC-plus-DC signals into a proportional DC output. According to the Analog Devices AD536A datasheet, it measures the true RMS value rather than average rectified amplitude, making it appropriate for power-equivalent measurements of sine waves, pulse trains, and other non-sinusoidal waveforms. The device is offered in a hermetically sealed 20-pin ceramic leaded package.
What are the key specifications of AD536ASE that engineers should know?
The AD536ASE is a 20-pin hermetically sealed true RMS-to-DC converter with a 0.09 MHz operating frequency and a 125 V maximum input rating. The AD536A family information also identifies approximately 2000 uA supply current and 2300 kHz bandwidth. Its monolithic laser-trimmed architecture provides the measurement accuracy of a true RMS converter in one integrated circuit, while its CQCC-20 ceramic package supports sealed, through-hole assemblies.
Where can I download the AD536ASE datasheet PDF?
The AD536ASE datasheet is available through Analog Devices' AD536A product page at https://www.analog.com/en/products/ad536a.html. The manufacturer's AD536A Data Sheet covers the true RMS conversion principle, accuracy grades, electrical characteristics, package information, and application guidance. Use the pin-description and application-circuit sections when assigning the 20 package leads, selecting input scaling components, and designing the output filter.
Where is the AD536ASE pinout located?
The AD536ASE pinout is located in the pin-description table of the Analog Devices AD536A manufacturer datasheet. The component uses a hermetically sealed LCC-20 package with a CQCC-20 designation and approximately 9 mm by 9 mm dimensions. Because the exact lead names and numbering are not published in the product excerpts, use the manufacturer pin table rather than relying on a generic ceramic-package diagram when making PCB connections.
What can replace the AD536ASE?
The closest drop-in choices are verified AD536A family members that use the same 20-pin ceramic package and retain the true RMS-to-DC conversion function. AD536ASE/883B is the clearest replacement because the comparison identifies the same CLCC-20 architecture and 125 V, 2000 uA, and 2300 kHz family ratings. AD536AJDZ and AD536AKDZ offer different accuracy grades, while AD536AYZ requires careful review of its grade-specific electrical limits before substitution.
Is AD536ASE the same as AD536ASE/883B?
AD536ASE and AD536ASE/883B use the same AD536A true RMS converter in a 20-pin CLCC package, but the 883B suffix identifies a distinct procurement grade that must be checked for qualification and ordering requirements. The published comparison gives both devices a 125 V maximum input rating, approximately 2000 uA supply current, and 2300 kHz bandwidth. Pin compatibility appears strong, although the manufacturer's ordering table should confirm the exact suffix, grade, temperature range, and documentation status.
AD536ASE vs AD536AJDZ - which is better for precision measurement?
AD536AJDZ is the better choice when its 0.2% maximum conversion error is sufficient and the application can use its 20-pin ceramic package, because the AD536AJ grade improves conversion error by 0.3 percentage points relative to the 0.5% AD536AK grade. The AD536ASE remains preferable when the exact suffix, operating grade, and qualification conditions match the designed assembly. Confirm each part's maximum error, temperature range, and package pinout before release.
When should I choose AD536ASE over AD536AKDZ?
Choose AD536ASE when its specified procurement grade, environmental requirements, and documentation match the product's operating conditions and the AD536AK grade's 0.5% maximum conversion error is adequate. Choose AD536AKDZ when the manufacturer confirms equivalent electrical ratings, pin compatibility, and qualification for the assembled application. The converter's common true RMS architecture and 20-pin ceramic package make either candidate technically plausible, but grade temperature limits and ordering requirements can control the final decision.
Is AD536ASE suitable for industrial power monitoring?
The AD536ASE is suitable for many industrial power-monitoring front ends because it provides true RMS measurement of complex AC waveforms, accepts signals up to 125 V, and uses a hermetically sealed ceramic package. The AD536A family's approximately 2300 kHz bandwidth and 2000 uA supply current are suitable for many measurement chains, but the final design must also verify input scaling, isolation, surge protection, calibration accuracy, and the converter's operating-temperature grade.
How much power does the AD536ASE dissipate?
Power dissipation for the AD536ASE equals its supply voltage multiplied by approximately 2000 uA supply current, plus the power consumed by the external application network. Estimated: using a 5 V supply and 2000 uA supply current gives about 0.010 W for the IC itself. Actual dissipation and junction temperature depend on the confirmed supply voltage, load on the output network, ambient temperature, and thermal path through the hermetically sealed ceramic package.
How should an AD536ASE application circuit be laid out?
Place the input-scaling and output-filter components close to their associated AD536ASE pins, and provide the supply bypassing and grounding arrangement shown in the manufacturer's application circuit. Keep high-impedance RMS-measurement nodes away from switching nodes and noisy return paths because leakage, contamination, and board leakage can affect true RMS accuracy. Follow the datasheet pin-description table for every LCC-20 connection rather than inferring function from package position alone.
Where can I buy AD536ASE online and what is its lead time?
Use the Request a Quote form on this page to request the AD536ASE, current commercial terms, and lead time. The request should identify the exact AD536ASE suffix, quantity, ceramic package, tube or tray packaging requirement, and any required qualification documentation. Do not substitute AD536ASE/883B without confirming whether the 883B grade and its ordering conditions satisfy the original assembly.
What is the price of AD536ASE?
Use the Request a Quote form on this page for the current AD536ASE price and volume availability. The quote request should state the exact AD536ASE ordering code, required quantity, and packaging preference. This is important because AD536A availability can be tied to grade, qualification suffix, ceramic package, and production status, so a family-level price should not be treated as a quote for the exact MPN.
Is AD536ASE in stock?
Current stock status should be confirmed through the Request a Quote form on this page by entering the exact AD536ASE MPN and required quantity. Include your acceptable production date, packaging format, and any qualification requirements in the request. Avoid treating a family listing or the AD536ASE/883B listing as proof that the standard AD536ASE suffix is available in the same quantity.
What compliance documents are available for AD536ASE?
The AD536ASE compliance status must be confirmed from the exact suffix's manufacturer documentation and customer-specific requirements. The product excerpts identify the hermetically sealed ceramic package and AD536A production family, but they do not establish RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. Use the Request a Quote form to request the appropriate current declarations or certificates for the exact ordering code.

工程参考数据: AD536ASE ——对比、设计指导和合规信息。

选型指南

Choose AD536ASE when the assembly requires the exact standard suffix, a hermetically sealed 20-pin ceramic package, and the established AD536A true RMS conversion function. AD536ASE/883B is the strongest candidate when the required procurement grade corresponds to the 883B qualification suffix and its ordering conditions are acceptable. AD536AJDZ is preferable for a channel needing the published 0.2% maximum conversion error, while AD536AKDZ offers the published 0.5% maximum-error grade in the same package family. AD536AYZ may fit designs whose grade-specific temperature and qualification requirements are satisfied. In every case, verify the manufacturer's pin description, maximum error, operating-temperature range, supply limits, and qualification documents before substitution. AD536ASD-family devices in other lead counts should not be treated as drop-in substitutes because their package footprints differ.

与替代料对比

参数 本产品 AD536ASE/883B AD536AJDZ AD536AKDZ AD536AYZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package LCC-20 LCC-20 - same LCC-20 - same LCC-20 - same LCC-20 - same
Function True RMS-to-DC converter True RMS-to-DC converter True RMS-to-DC converter True RMS-to-DC converter True RMS-to-DC converter
Maximum Input Voltage 125 V 125 V 125 V 125 V 125 V
Qualification Suffix Standard AD536ASE suffix 883B qualification suffix AJ accuracy and package suffix AK accuracy and package suffix AY grade and package suffix

关键差异点

  • Provides true RMS measurement rather than average rectification (对比 AD536ASE/883B)
  • Higher accuracy option exists within the same ceramic-package family (对比 AD536AJDZ)
  • Maintains the same measurement core and package (对比 AD536AKDZ)

设计说明

Use the manufacturer's application circuit as the baseline for input scaling, output filtering, supply bypassing, and grounding. Keep the high-impedance converter node and feedback components away from switching traces and inductive elements. The hermetically sealed LCC-20 package protects the die, but it does not protect against conductive board contamination; maintain suitable cleanliness and guard sensitive nodes where high input impedance is required.

Do not substitute an average-rms or peak-detector calculation for true RMS behavior when the input waveform is non-sinusoidal. Confirm the converter's 0.09 MHz operating frequency, approximately 2300 kHz bandwidth, and external filter settings against the signal bandwidth. If the source waveform contains switching spikes outside the intended measurement band, remove those components before the converter rather than relying on excessive input attenuation.

Estimated: using a 5 V supply and the identified 2000 uA supply current, the AD536ASE core dissipates approximately 0.010 W. Verify the actual supply voltage, external-network loading, and maximum ambient temperature before relying on this estimate. Because the device uses a hermetically sealed ceramic package, its thermal path differs from a plastic SMD package and should be evaluated against the manufacturer's specified operating conditions.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The exact-suffix compliance declarations were not established by the product documentation excerpts. Request current RoHS, REACH, lead-free, halogen-free, conflict-minerals, and qualification documents through the Request a Quote form.

数据核验日期: 2026-11-18 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

ad536a datasheet AD536ASE datasheet AD536ASE datasheet pdf AD536ASE pinout AD536ASE specifications AD536ASE LCC-20 converter AD536ASE true RMS converter AD536ASE equivalent AD536ASE replacement AD536ASE cross reference AD536ASE vs AD536AJDZ AD536ASE price AD536ASE stock Analog Devices AD536ASE AD536ASE application circuit

相关元器件 & 术语

Analog Devices AD536ASE AD536A AD536ASE/883B AD536AJDZ AD536AKDZ AD536AYZ true RMS-to-DC converter RMS measurement signal converter analog signal conditioning monolithic converter laser-trimmed circuit complex AC waveform AC-plus-DC signal root-mean-square 125 V maximum input 2300 kHz bandwidth 2000 uA supply current 0.09 MHz operating frequency LCC-20 CQCC-20 hermetically sealed ceramic package industrial power monitoring audio level detection
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情