AD622AN - Low-Cost Gain 2-1000 INA | Analog Devices
Артикул: AD622AN ✓ АктивенAD622AN Обзор
An instrumentation amplifier is a specialized amplifier that combines input amplification, differential subtraction, and common-mode rejection in one integrated circuit. Its hierarchy extends from signal conditioning to amplifier IC and analog signal-processing IC. This makes it especially useful when a sensor output must be measured relative to a reference rather than against system ground.
The AD622 replaces low-cost discrete designs based on two or three operational amplifiers. Its integrated approach reduces board area, component count, and assembly effort while improving common-mode rejection, linearity, temperature stability, and reliability. One resistor between the gain-setting terminals establishes most required gains, simplifying calibration and prototype changes.
The internal three-op-amp architecture provides differential input handling and a reference input for output-voltage adjustment. Gain is established by the external gain resistor, with no external resistor needed for a gain of 1. This configuration is appropriate for bridge, pressure, temperature, current, and biomedical signal chains where the signal is small relative to a varying common-mode voltage.
Typical applications include low-cost sensor interfaces, medical instrumentation, industrial process measurement, portable data acquisition, and precision bridge excitation. The AD622AN is also useful when replacing a discrete instrumentation-amplifier arrangement and when a design needs selectable gain without changing the amplifier package.
When laying out a circuit, keep the gain resistor close to the specified gain-setting pins and maintain a low-impedance reference return. Check input and output voltage limits for the selected supply voltage, and evaluate gain error, common-mode rejection, offset, and input bias current against the required measurement accuracy.
This page combines the AD622 gain-setting characteristics with practical PCB guidance, sourcing information, and a focused comparison framework. It is designed to help engineers determine whether the AD622AN provides sufficient accuracy and integration for a low-cost differential-signal conditioning design.
Аналоги без доработки для AD622AN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AD622AN (тот же форм-фактор и посадочное место) — отличается по Product Type.
AD620ANZ
✅ Прямая заменаУточнить цену
Открыть даташит →AD622AN Максимальные параметры и электрические характеристики
| Product Type | Instrumentation amplifier |
| Gain Range Without External Resistor | 1 |
| Gain Range With External Resistor | 2 to 1000 |
| External Gain-Setting Resistors | 1 resistor |
| Architecture | Three-op-amp instrumentation amplifier |
Руководство по цоколевке AD622AN в корпусе standard
Цоколевка для AD622AN (корпус standard). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для AD622AN.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
AD622AN подходит для 6 применениеs: Low-Cost Bridge Sensor Interface, Medical Signal Acquisition, Industrial Process Measurement, Portable Data Acquisition, Precision Current Measurement, Temperature and Resistance Measurement.
Low-Cost Bridge Sensor Interface
The AD622AN fits bridge-front-end designs that produce a small differential voltage superimposed on a larger common-mode voltage. Its instrumentation-amplifier architecture provides differential signal amplification and common-mode rejection in one package, replacing a two- or three-op-amp discrete implementation. A single external resistor can establish any gain from 2 to 1000, while gain 1 requires no resistor. The design should verify bridge excitation, common-mode input range, output swing, gain accuracy, and the contribution of sensor and resistor tolerance before calibration.
Рекомендуется
Medical Signal Acquisition
The AD622AN can serve as the first amplification stage in a low-cost medical or biometric signal-acquisition chain when differential excitation and common-mode rejection are more important than maximum accuracy. Its selectable gain from 1 to 1000 allows the interface to accommodate different sensor amplitudes without adopting a discrete amplifier network. Engineers should assess offset, input bias current, noise, common-mode rejection, and patient-protection requirements against the intended measurement bandwidth. Isolation and clinical qualification requirements remain separate from the amplifier's signal-conditioning role.
Рекомендуется
Industrial Process Measurement
The AD622AN is appropriate for industrial sensor interfaces that combine a low-level differential signal with a substantial process-dependent common-mode voltage. The integrated instrumentation-amplifier topology simplifies conditioning by supplying gain, differential subtraction, and common-mode rejection in one device. A single gain-setting resistor permits a range of 2 to 1000, and gain 1 can be used without that resistor. For factory equipment, validate the available supply range, input common-mode limits, output swing, temperature behavior, grounding strategy, and isolation architecture before committing to production hardware.
Рекомендуется
Portable Data Acquisition
The AD622AN is useful in portable and battery-powered acquisition equipment where analog front-end area and component count matter. It consolidates the functions of multiple discrete amplifiers while allowing gain from 1 without an external resistor or gain from 2 to 1000 with one resistor. This flexibility helps map several sensor ranges onto a compact board. Designers should compare quiescent current, supply-voltage compatibility, noise performance, and current consumption against the acquisition system's power budget, then confirm the amplifier's operating limits for the complete battery range.
Рекомендуется
Precision Current Measurement
The AD622AN can condition the small differential voltage produced by a current-sensing element when the system needs adjustable gain and improved rejection of common-mode voltage. Select the external resistor to place the measured signal within the amplifier's output range, or operate at gain 1 without a resistor. The circuit must also account for sense-element excitation, input bias-current error, offset, gain tolerance, reference-ground quality, and output-headroom limits. Those checks are especially important at low measured currents where input offset can dominate the result.
Рекомендуется
Temperature and Resistance Measurement
The AD622AN is suitable for resistance-based and temperature-derived sensor networks in which the information appears as a differential voltage. Its adjustable gain from 2 to 1000 using one resistor allows the same front end to cover different sensor sensitivities, while gain 1 provides a direct, resistor-free configuration. The circuit should use a stable excitation or reference, keep the gain resistor close to the device, and verify offset and gain error across the required temperature range. Sensor nonlinearity and resistance tolerance must also be included in calibration.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AD622AN — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AD620ANZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 8-pin PDIP | 8-pin PDIP |
| Product Type | Instrumentation amplifier | Instrumentation amplifier |
| Gain Without External Resistor | 1 | 1 |
| Gain Range With External Resistor | 2 to 1000 | Up to 1000 |
| External Gain-Setting Resistors | 1 resistor | 1 resistor |
Ключевые отличия
- Gain of 1 without an external resistor (против AD620ANZ)
- Low-cost integration of a multi-amplifier circuit (против AD620ANZ)
- Single-resistor gain programming (против AD620ANZ)
Заметки по проектированию
Place the external gain-setting resistor as close as practical to the AD622AN gain terminals and route it away from high-current switching nodes. Keep the reference-input return short and connect it to the same low-impedance ground reference used by the differential input source. A compact gain-resistor connection reduces parasitic pickup and helps the amplifier behave consistently with the gain calculated from the datasheet equation.
Separate the amplifier's supply bypassing from noisy switching-current paths. Place the required bypass capacitor at the device supply pins with a short return path, and verify that the complete supply range remains within the AD622AN's operating limits. If the signal source has a large common-mode voltage, check the input common-mode range at both minimum and maximum supply conditions rather than relying only on nominal voltage.
Do not assume that an eight-lead instrumentation amplifier is automatically a drop-in replacement. Compare pin functions, reference behavior, gain-resistor calculation, common-mode range, output swing, offset, input bias current, gain error, and supply requirements between AD622AN and any proposed substitute. Resistor tolerance directly changes the actual gain, so include it in the end-to-end measurement uncertainty when selecting the gain network.
For low-level sensor signals, keep input traces short, use a stable reference return, and minimize parasitic capacitance on the high-impedance reference node. Check offset and noise at the actual signal bandwidth rather than relying on a broad headline figure. Grounding, sensor excitation, shielding, and the gain resistor can each contribute error or pickup, so evaluate the complete analog front end under operating conditions.
Информация о соответствии
The AD622 product page identifies the AD622 family as production, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the AD622AN order code.