Analog Devices

AD622AN - Low-Cost Gain 2-1000 INA | Analog Devices

MPN: AD622AN ✓ Hoạt động
MOQ: 1 |

AD622AN Tóm tắt

The Analog Devices AD622AN is a low-cost instrumentation amplifier with gains from 1 to 1000, using one external resistor for gains from 2 to 1000 and no external resistor for gain 1. It is packaged in an 8-pin PDIP and is designed for low-cost signal-conditioning systems that need controlled amplification of differential sensor signals.

An instrumentation amplifier is a specialized amplifier that combines input amplification, differential subtraction, and common-mode rejection in one integrated circuit. Its hierarchy extends from signal conditioning to amplifier IC and analog signal-processing IC. This makes it especially useful when a sensor output must be measured relative to a reference rather than against system ground.

The AD622 replaces low-cost discrete designs based on two or three operational amplifiers. Its integrated approach reduces board area, component count, and assembly effort while improving common-mode rejection, linearity, temperature stability, and reliability. One resistor between the gain-setting terminals establishes most required gains, simplifying calibration and prototype changes.

The internal three-op-amp architecture provides differential input handling and a reference input for output-voltage adjustment. Gain is established by the external gain resistor, with no external resistor needed for a gain of 1. This configuration is appropriate for bridge, pressure, temperature, current, and biomedical signal chains where the signal is small relative to a varying common-mode voltage.

Typical applications include low-cost sensor interfaces, medical instrumentation, industrial process measurement, portable data acquisition, and precision bridge excitation. The AD622AN is also useful when replacing a discrete instrumentation-amplifier arrangement and when a design needs selectable gain without changing the amplifier package.

When laying out a circuit, keep the gain resistor close to the specified gain-setting pins and maintain a low-impedance reference return. Check input and output voltage limits for the selected supply voltage, and evaluate gain error, common-mode rejection, offset, and input bias current against the required measurement accuracy.

This page combines the AD622 gain-setting characteristics with practical PCB guidance, sourcing information, and a focused comparison framework. It is designed to help engineers determine whether the AD622AN provides sufficient accuracy and integration for a low-cost differential-signal conditioning design.

Bộ thay thế dễ dàng lắp đặt cho AD622AN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AD622AN (cùng hình factor và footprint) — khác nhau ở Product Type.

Analog Devices
Product Type: Low-cost, low-power, high-accuracy instrumentation amplifier
So sánh với AD622AN →

AD620ANZ

✅ Drop-In
Analog Devices
📦 8-PDIP
Low-cost, low-power, high-accuracy instrumentation amplifier · 1 channel · 1 to 10,000 · One external resistor · 1 MHz · 1.3 mA · 2 nA

Liên hệ để biết giá

Xem tài liệu →

AD622AN Tỷ lệ tối đa & tính chất điện

Product Type Instrumentation amplifier
Gain Range Without External Resistor 1
Gain Range With External Resistor 2 to 1000
External Gain-Setting Resistors 1 resistor
Architecture Three-op-amp instrumentation amplifier

Hướng dẫn cấu hình chân AD622AN standard

Cấu hình chân cho AD622AN (standard gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân standard cho AD622AN

Không có dữ liệu chân cụ thể sẵn có cho AD622AN.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD622AN phù hợp cho 6 Áp dụngs: Low-Cost Bridge Sensor Interface, Medical Signal Acquisition, Industrial Process Measurement, Portable Data Acquisition, Precision Current Measurement, Temperature and Resistance Measurement.

🔧

Low-Cost Bridge Sensor Interface

The AD622AN fits bridge-front-end designs that produce a small differential voltage superimposed on a larger common-mode voltage. Its instrumentation-amplifier architecture provides differential signal amplification and common-mode rejection in one package, replacing a two- or three-op-amp discrete implementation. A single external resistor can establish any gain from 2 to 1000, while gain 1 requires no resistor. The design should verify bridge excitation, common-mode input range, output swing, gain accuracy, and the contribution of sensor and resistor tolerance before calibration.

💊

Medical Signal Acquisition

The AD622AN can serve as the first amplification stage in a low-cost medical or biometric signal-acquisition chain when differential excitation and common-mode rejection are more important than maximum accuracy. Its selectable gain from 1 to 1000 allows the interface to accommodate different sensor amplitudes without adopting a discrete amplifier network. Engineers should assess offset, input bias current, noise, common-mode rejection, and patient-protection requirements against the intended measurement bandwidth. Isolation and clinical qualification requirements remain separate from the amplifier's signal-conditioning role.

🏭

Industrial Process Measurement

The AD622AN is appropriate for industrial sensor interfaces that combine a low-level differential signal with a substantial process-dependent common-mode voltage. The integrated instrumentation-amplifier topology simplifies conditioning by supplying gain, differential subtraction, and common-mode rejection in one device. A single gain-setting resistor permits a range of 2 to 1000, and gain 1 can be used without that resistor. For factory equipment, validate the available supply range, input common-mode limits, output swing, temperature behavior, grounding strategy, and isolation architecture before committing to production hardware.

📱

Portable Data Acquisition

The AD622AN is useful in portable and battery-powered acquisition equipment where analog front-end area and component count matter. It consolidates the functions of multiple discrete amplifiers while allowing gain from 1 without an external resistor or gain from 2 to 1000 with one resistor. This flexibility helps map several sensor ranges onto a compact board. Designers should compare quiescent current, supply-voltage compatibility, noise performance, and current consumption against the acquisition system's power budget, then confirm the amplifier's operating limits for the complete battery range.

⚡

Precision Current Measurement

The AD622AN can condition the small differential voltage produced by a current-sensing element when the system needs adjustable gain and improved rejection of common-mode voltage. Select the external resistor to place the measured signal within the amplifier's output range, or operate at gain 1 without a resistor. The circuit must also account for sense-element excitation, input bias-current error, offset, gain tolerance, reference-ground quality, and output-headroom limits. Those checks are especially important at low measured currents where input offset can dominate the result.

🌐

Temperature and Resistance Measurement

The AD622AN is suitable for resistance-based and temperature-derived sensor networks in which the information appears as a differential voltage. Its adjustable gain from 2 to 1000 using one resistor allows the same front end to cover different sensor sensitivities, while gain 1 provides a direct, resistor-free configuration. The circuit should use a stable excitation or reference, keep the gain resistor close to the device, and verify offset and gain error across the required temperature range. Sensor nonlinearity and resistance tolerance must also be included in calibration.

What is the AD622AN?
The AD622AN is a low-cost, moderately accurate Analog Devices instrumentation amplifier that amplifies differential sensor signals while rejecting common-mode voltage. According to the Analog Devices AD622 datasheet, it can operate at gain 1 without an external resistor or at gains from 2 to 1000 with one external gain-setting resistor. The integrated design replaces a conventional two- or three-op-amp instrumentation-amplifier circuit.
How is the gain set on an AD622AN?
The AD622AN uses one external resistor to establish gains from 2 to 1000, while gain 1 requires no external resistor. According to the Analog Devices AD622 datasheet, this arrangement allows the gain to be changed without redesigning an active filter or changing the instrumentation-amplifier architecture. Select the resistor using the gain equation and resistor table in the manufacturer datasheet, then verify resistor tolerance against the required gain accuracy.
Where can I download the AD622AN datasheet PDF?
The official AD622AN datasheet PDF is available from Analog Devices at the manufacturer URL listed on this page. The document covers the instrumentation-amplifier architecture, gain-setting resistor calculation, electrical characteristics, pin descriptions, and typical application circuits. For a physical replacement, compare the exact AD622AN order code, package, supply requirements, temperature grade, and pinout against the original device before releasing the PCB.
Where is the AD622AN pinout located?
The AD622AN pinout and pin descriptions are located in the Pin Configuration and Description sections of the Analog Devices AD622 datasheet. The AD622 family uses a traditional instrumentation-amplifier arrangement with differential inputs, supply pins, a reference input, an output, and gain-setting terminals. Use the exact package drawing associated with the AD622AN order code when assigning PCB tracks, because suffix and package variations can use different lead packages.
What are the key specifications of AD622AN that engineers should know?
The key AD622AN specifications are its instrumentation-amplifier function, gain of 1 without an external resistor, adjustable gain from 2 to 1000 with one resistor, and low-cost integration of a conventional multi-op-amp signal chain. Analog Devices describes the device as moderately accurate, with improved common-mode rejection, linearity, temperature stability, reliability, and board-area efficiency compared with discrete low-cost implementations.
When should I choose AD622AN over AD620ANZ?
Choose the AD622AN when a low-cost differential amplifier with one-resistor gain selection from 2 to 1000 is appropriate for the required accuracy. Consider the AD620ANZ when its own gain range, offset, bias current, common-mode rejection, supply range, and noise performance better match the measurement. Both are related eight-lead instrumentation-amplifier options, but a PCB replacement should be accepted only after checking every electrical limit and the manufacturer pin configuration.
What is the difference between AD622AN and AD620ANZ?
The principal difference is the instrument-amplifier family and its detailed performance limits, not the basic function. The AD622AN supports gain 1 without an external resistor and gains from 2 to 1000 with one resistor. The AD620ANZ also belongs to the traditional one-resistor-gain instrumentation-amplifier category. Compare offset, gain error, common-mode rejection, input bias current, noise, supply range, and package dimensions before selecting a substitute.
Is AD622AN suitable for bridge sensor measurements?
The AD622AN is suitable for many bridge-sensor front ends because it amplifies a small differential signal while rejecting common-mode voltage. Use gain 1 when no external resistor is desired, or select a gain from 2 to 1000 with one resistor to bring the sensor output into the amplifier's usable output range. The design must also verify excitation voltage, input common-mode range, reference connection, output swing, and error contribution from the sensor and gain resistor.
What is the best drop-in replacement for AD622AN?
The best drop-in replacement is the part that matches the AD622AN's eight-lead footprint, pin arrangement, gain-setting method, supply range, input and output limits, and accuracy class. The AD620ANZ is a related instrumentation amplifier that may be considered after a full data-sheet comparison. A replacement is not confirmed solely by package shape: verify pin functions, common-mode range, reference behavior, and gain-resistor calculation with the manufacturer documentation.
Can AD620ANZ replace AD622AN without a PCB change?
The AD620ANZ may support a no-PCB-change replacement strategy because it is a related eight-lead instrumentation amplifier using the traditional gain-resistor arrangement, but compatibility must be confirmed before production use. Compare AD622AN and AD620ANZ supply voltage, common-mode input range, output swing, offset, gain error, input bias current, noise, and reference-input behavior. Use the Request a Quote form on this page to discuss sourcing for the exact replacement decision.
Where can I buy AD622AN online?
The AD622AN can be requested through the Request a Quote form on this XAIPART page. The form is the appropriate route for current unit pricing, stock status, manufacturer lead time, minimum order quantity, and orderable package quantities. Provide the exact AD622AN order code and the required quantity so the commercial response matches the package and delivery requirements of the design.
What is the price of AD622AN?
Current AD622AN pricing is provided through the Request a Quote form on this page rather than as a static price statement. Submit the exact MPN, required quantity, and target package or delivery conditions to receive a current quotation. The quote process also allows XAIPART to confirm availability and production lead time for the order, which can change independently of the amplifier's technical characteristics.
What is the lead time for AD622AN?
The current AD622AN lead time should be confirmed through the Request a Quote form on this page. Lead time depends on order quantity, package configuration, factory inventory, and the authorized supply chain. Include your required delivery date and annual usage forecast when requesting the quote. For new production designs, plan the sourcing decision early because quote confirmation and lot allocation can differ from routine electronic component replenishment.
Is AD622AN in stock?
AD622AN stock status should be checked through the Request a Quote form on this XAIPART page. Because availability can change with factory production and order volume, submit the exact MPN and required quantity for a current response. The quotation can also identify the standard shipping method, expected lead time, and any minimum-order or package constraints that apply to the requested quantity.
What is the best Analog Devices equivalent for AD622AN?
The AD620ANZ is the closest related Analog Devices candidate in the traditional eight-lead instrumentation-amplifier category, but it should not be treated as automatically interchangeable. The relevant comparison includes gain range, gain-setting equation, common-mode rejection, input offset, bias current, noise, supply voltage, output swing, and reference behavior. Use the AD622AN when its specified gain range and accuracy are required; approve the AD620ANZ only after confirming each electrical limit.
What design details matter when using the AD622AN?
The most important AD622AN design details are gain-resistor selection, reference grounding, input common-mode limits, output swing, and stable bypass placement. The one-resistor gain arrangement simplifies adjustment, but resistor tolerance directly influences gain error. According to the Analog Devices AD622 datasheet, the gain can be 1 without an external resistor or 2 to 1000 with one resistor. Follow the manufacturer application guidance for supply bypassing, reference connection, and PCB layout.

Dữ liệu tham khảo kỹ thuật cho AD622AN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the AD622AN when a low-cost, moderately accurate instrumentation amplifier with a unity-gain option and one-resistor adjustment from gain 2 to 1000 is appropriate. It is particularly useful for bridge sensors, resistance measurements, and other differential signals riding on a varying common-mode voltage. The AD620ANZ is the closest related candidate for an eight-lead replacement review, but choose it only after confirming offset, bias current, CMRR, noise, gain behavior, supply range, and pin functions. If the design requires accuracy beyond the AD622 family's moderately accurate positioning, neither part should be selected without a full error-budget review. For new layouts, also confirm the exact package, operating temperature grade, grounding strategy, reference connection, and gain-resistor tolerance before final release.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này AD620ANZ
Brand Analog Devices Analog Devices
Package 8-pin PDIP 8-pin PDIP
Product Type Instrumentation amplifier Instrumentation amplifier
Gain Without External Resistor 1 1
Gain Range With External Resistor 2 to 1000 Up to 1000
External Gain-Setting Resistors 1 resistor 1 resistor

Bảo phân biệt quan trọng

  • Gain of 1 without an external resistor (vsAD620ANZ)
  • Low-cost integration of a multi-amplifier circuit (vsAD620ANZ)
  • Single-resistor gain programming (vsAD620ANZ)

Ghi chú thiết kế

Place the external gain-setting resistor as close as practical to the AD622AN gain terminals and route it away from high-current switching nodes. Keep the reference-input return short and connect it to the same low-impedance ground reference used by the differential input source. A compact gain-resistor connection reduces parasitic pickup and helps the amplifier behave consistently with the gain calculated from the datasheet equation.

Separate the amplifier's supply bypassing from noisy switching-current paths. Place the required bypass capacitor at the device supply pins with a short return path, and verify that the complete supply range remains within the AD622AN's operating limits. If the signal source has a large common-mode voltage, check the input common-mode range at both minimum and maximum supply conditions rather than relying only on nominal voltage.

Do not assume that an eight-lead instrumentation amplifier is automatically a drop-in replacement. Compare pin functions, reference behavior, gain-resistor calculation, common-mode range, output swing, offset, input bias current, gain error, and supply requirements between AD622AN and any proposed substitute. Resistor tolerance directly changes the actual gain, so include it in the end-to-end measurement uncertainty when selecting the gain network.

For low-level sensor signals, keep input traces short, use a stable reference return, and minimize parasitic capacitance on the high-impedance reference node. Check offset and noise at the actual signal bandwidth rather than relying on a broad headline figure. Grounding, sensor excitation, shielding, and the gain resistor can each contribute error or pickup, so evaluate the complete analog front end under operating conditions.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The AD622 product page identifies the AD622 family as production, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the AD622AN order code.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD622AN datasheet AD622AN datasheet pdf AD622AN pinout AD622AN specifications AD622AN gain resistor AD622AN application circuit AD622AN replacement AD622AN equivalent AD622AN vs AD620ANZ AD622AN price AD622AN stock Analog Devices AD622AN AD622AN instrumentation amplifier AD622AN 8-PDIP AD622AN bridge sensor

Các bộ phận và thuật ngữ liên quan

Analog Devices AD622AN AD622ANZ AD620ANZ AD629AN instrumentation amplifier signal-conditioning amplifier differential amplifier amplifier IC analog signal-processing IC three-op-amp architecture common-mode rejection CMRR gain error input offset voltage input bias current gain-setting resistor 8-pin PDIP PDIP package through-hole package bridge sensor medical instrumentation industrial process measurement portable data acquisition resistance measurement
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ