AD712AH - Dual Precision High-Speed BiFET Op Amp | Analog Devices
Артикул: AD712AH ✓ АктивенAD712AH Обзор
An operational amplifier is an active semiconductor device that compares two input voltages and drives its output to amplify the difference between them. Precision operational amplifiers belong to the broader analog IC hierarchy, where they serve as high-gain voltage amplifiers in instrumentation, sensor interfaces, filtering, and feedback-control circuits. The AD712AH is a dual BiFET-input device, providing two amplifiers in one package for economical signal-chain implementation.
The AD712AH combines a 4 MHz bandwidth with a maximum offset voltage of 2000 uV. Its low offset voltage reduces output error in amplifier configurations where the input signal is small and dc operating-point differences could otherwise dominate the useful signal. Laser wafer trimming is used to control offset voltage and offset-voltage drift, improving consistency in precision analog stages. The dual configuration also reduces the component count when a board requires two similar amplifier channels.
Typical applications include low-level sensor amplification, audio preamplification, active filtering, instrumentation, laboratory equipment, and precision control loops. In an audio preamplifier, the AD712AH can provide the input gain and low dc-error behavior expected from a precision BiFET amplifier. In instrumentation, its 4 MHz bandwidth supports higher-frequency signal paths while the 2000 uV maximum offset remains relevant to the overall measurement error budget.
The 8-pin TO-99 metal-can construction should be treated as a through-hole hermetic package when planning a PCB. Confirm pin orientation, case dimensions, lead spacing, and insertion requirements against the manufacturer pinout and package drawing before layout. Because a dual amplifier shares one package, evaluate channel-to-channel behavior in the intended circuit and include adequate input filtering if the source impedance is high.
This page consolidates the exact product description, package information, technical limits, sourcing path, comparison data, and practical design considerations for engineers evaluating the AD712AH. Its value is the combination of concise technical context with pin-package, selection, and application guidance needed before committing a precision analog design to production.
Аналоги без доработки для AD712AH — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AD712AH (тот же форм-фактор и посадочное место).
AD712BH
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD711TH
✅ Прямая заменаУточнить цену
Открыть даташит →AD712AH Максимальные параметры и электрические характеристики
| Number of Channels | 2 |
| Amplifier Type | Precision BiFET operational amplifier |
| Maximum Offset Voltage | 2000 uV |
| Bandwidth | 4 MHz |
| Architecture | Monolithic |
| Input Transistor Type | BiFET |
| Offset Adjustment Method | Laser wafer trimming |
| Корпус | 8-pin TO-99 metal can |
| Число выводов | 8 pins |
| Тип монтажа | Through-hole |
| Product Description | High-speed, precision monolithic dual operational amplifier |
Руководство по цоколевке AD712AH в корпусе 8-pin to-99 metal can
Цоколевка для AD712AH (корпус 8-pin to-99 metal can). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для AD712AH.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
AD712AH подходит для 6 применениеs: Precision Audio Preamplification, Low-Level Sensor Signal Conditioning, Instrumentation and Measurement, Active Filter Design, Audio and Control Signal Interface, Laboratory and Test Equipment.
Precision Audio Preamplification
The AD712AH fits dual-channel audio preamplifier stages that require a precision BiFET input stage and a 4 MHz bandwidth. Its two amplifiers can provide matched architectural roles in a stereo or sequential processing circuit while reducing the number of packages. The stated maximum offset voltage of 2000 uV should be included in the dc-offset budget, and the completed design should be checked for input-current noise, slew-rate margin, output swing, and stable operation with the selected gain network. The TO-99 metal-can construction can also provide useful physical separation from dense analog circuitry when board space permits.
Рекомендуется
Low-Level Sensor Signal Conditioning
The AD712AH is appropriate for conditioning small sensor outputs when the system needs higher bandwidth than a slow instrumentation amplifier and lower dc offset than a general-purpose amplifier. Its 4 MHz bandwidth preserves more signal detail, while the 2000 uV maximum offset defines the initial dc-error contribution. Designers should verify input bias current against the sensor impedance, confirm the input common-mode range for the selected supply, and test the noise contribution of the complete amplifier-and-source network. The dual package allows two related channels to be placed close together without adding a second metal-can footprint.
Рекомендуется
Instrumentation and Measurement
The AD712AH can serve as the active element in precision instrumentation front ends that require a low dc-error amplifier and useful small-signal bandwidth. Laser wafer trimming supports consistent offset behavior across production units, while the monolithic dual construction can support channel pairing in a measurement instrument. The amplifier's offset, drift, bias current, noise, common-mode range, and output limitations must be combined with the complete analog-front-end budget. For bridge, thermocouple, or high-impedance sensing applications, check input bias-current effects and use guarding techniques where leakage and thermal gradients could dominate.
Рекомендуется
Active Filter Design
The AD712AH's 4 MHz bandwidth makes it suitable for active filtering stages where the signal spectrum must pass through the amplifier while dc offset and drift remain controlled. The dual package can implement two filter sections, such as a low-pass stage followed by another shaping section, without duplicating the physical footprint. Component tolerances, amplifier open-loop gain, and the interaction between the selected feedback network and the required phase margin determine the realized filter response. Prototype each section with the intended source and load impedances, because the gain-bandwidth relationship and input-current behavior can alter the final transfer function.
Рекомендуется
Audio and Control Signal Interface
The AD712AH can be used in equipment that combines analog audio or low-frequency control signals with high-speed closed-loop functions. Its 4 MHz bandwidth provides margin above audio-bandwidth applications, while the precision BiFET architecture supports applications sensitive to dc error and input current. A practical implementation can use one channel for an input gain stage and the other for active feedback, buffering, or an output interface. Check the output-stage drive capability, supply headroom, and stability with capacitive loads. For higher-density control boards, the relatively large TO-99 package requires mechanical planning compared with modern surface-mount dual amplifiers.
Рекомендуется
Laboratory and Test Equipment
The AD712AH is a practical fit for laboratory amplifier modules, buffer boards, and custom test fixtures that benefit from a dual precision BiFET amplifier in a through-hole package. The hermetic-style TO-99 construction is familiar to instrumentation designers and supports hand-built or legacy-compatible boards. Use the manufacturer's pin and package drawings to preserve isolation clearance, then evaluate offset drift during warm-up and long measurement intervals. Supply bypassing, grounding, and connector return paths remain important because they can affect apparent noise and channel balance. The device's 4 MHz bandwidth is useful for general-purpose signal conditioning rather than only narrow-band audio work.
Рекомендуется
Справочные инженерные данные для AD712AH — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AD712BH | AD711TH |
|---|---|---|---|
| Package | TO-99-8 Metal Can | TO-99-8 Metal Can | TO-99-8 Metal Can |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Channel Count | 2 | 2 | 2 |
| Amplifier Family | AD712 precision BiFET operational amplifier | AD712 precision BiFET operational amplifier | AD711 precision BiFET operational amplifier |
| Input Transistor Type | BiFET | BiFET | BiFET |
| Mounting Type | Through-hole | Through-hole | Through-hole |
| Trim Method | Laser wafer trimming | Laser wafer trimming | Laser wafer trimming |
Ключевые отличия
- Dual precision channels in one hermetic-style package (против AD711TH)
- Same AD712 family for the closest identified replacement (против AD712BH)
- Precision and speed in a legacy-compatible footprint (против AD711TH)
Заметки по проектированию
Use the official TO-99-8 drawing to establish the footprint, lead spacing, pin-1 orientation, and keep-out around the metal can. Do not derive the land pattern from the body diameter alone. Check that the package has adequate clearance from adjacent transformers, relays, heat sources, and tall components because the metal can occupies more physical height than a typical surface-mount dual op amp.
Keep feedback-loop components close to the amplifier pins and route the feedback return directly to the amplifier rather than through shared ground paths. For source impedances high enough that input bias current creates meaningful error, use a guarded input or consider a lower-bias-current amplifier. Evaluate noise using the complete source impedance because the amplifier's own current and voltage noise can interact with the sensor network.
Do not approve a replacement based only on the TO-99-8 outline. Confirm the pin functions, supply range, input common-mode range, output swing, offset, drift, input bias current, bandwidth, slew rate, noise, and stability with capacitive loads. The AD712AH is a dual amplifier, so incorrect channel pairing can also reverse feedback polarity or place an offset-null function in an unintended operating state.
Estimate dissipation from the actual supply voltage, output voltage, quiescent current, and load current before assigning mechanical constraints. The metal-can package provides a thermal path to the board or heat sink, but the effectiveness depends on copper area, airflow, neighboring components, and the manufacturer's thermal guidance. Verify the junction-temperature limit and temperature grade for the exact AD712AH ordering option.
Информация о соответствии
No product-specific compliance declarations were identified for the exact AD712AH ordering option. AEC-Q100 is not applicable because this product is an analog operational amplifier rather than an automotive-qualified device.