AD7892AR-1REEL - 12-Bit 500kSPS SAR ADC | Analog Devices
Артикул: AD7892AR-1REEL ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $14.05 | $1.405,00 |
| 500 | $12.4 | $6.200,00 |
| 1.000 | $11.1 | $11.100,00 |
AD7892AR-1REEL Обзор
An ADC (analog-to-digital converter) is a mixed-signal semiconductor that translates real-world analog voltages into discrete digital codes for processing by microcontrollers, DSPs, or FPGAs. Within the data-converter hierarchy, SAR (successive-approximation register) ADCs sit between flash converters and sigma-delta ADCs in speed and resolution: they offer 8-18 bits of resolution with 0.1-10 MSPS throughput and low latency, making them the workhorse for multiplexed control loops, instrumentation, and motor control. The AD7892 family belongs to this SAR category and is further classified as a bipolar-input, single-supply precision ADC for industrial measurement applications.
Key specifications include 12-bit resolution (no missing codes), 500 kSPS throughput (the AD7892-1 grade; the AD7892-3 grade reaches 600 kSPS), bipolar ±5 V or ±10 V analog input range, ±5 V single-supply operation, internal 2.5 V reference, and 1.47 µs ADC conversion time. The 24-pin SOIC wide-body package offers 0.295 inch (7.50 mm) body width and operates from -40 °C to +85 °C ambient, suitable for industrial environments.
Architecturally, the converter combines a high-speed comparator, charge-redistribution DAC array, and successive-approximation register clocked from an internal oscillator. The on-chip track/hold front-end settles in ~150 ns, allowing full throughput at the rated 500 kSPS without external buffering for many sensor signals.
Typical applications include industrial process control, motor control feedback loops, multi-channel data acquisition systems, instrumentation front-ends, and precision transducer signal conditioning. Design engineers select the AD7892-1 when bipolar input range and single-supply operation are required in a compact analog front-end.
Аналоги без доработки для AD7892AR-1REEL — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AD7892AR-1REEL (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Supply Voltage, Interface, Number of Channels.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
AD7892ARZ-1REEL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD7892AR-1
✅ Прямая замена✓ В наличии
$11.2 / шт.
Открыть даташит →AD7892ARZ-1
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD7892AR-1REEL7
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD7265BCPZ-REEL
✅ Прямая замена✓ В наличии
$8.15 / шт.
Открыть даташит →AD7264BSTZ-5-RL7
✅ Прямая замена✓ В наличии
$10.95 / шт.
Открыть даташит →AD7324BRUZ-REEL
✅ Прямая замена✓ В наличии
$5.75 / шт.
Открыть даташит →AD7892AR-1REEL Максимальные параметры и электрические характеристики
| Number of Bits | 12 |
| Частота дискретизации | 500 kSPS (AD7892-1, AD7892-2); 600 kSPS (AD7892-3) |
| Conversion Time | 1.47 µs |
| Number of Inputs | 1 (single channel, with ±5V or ±10V bipolar input range) |
| Data Interface | Serial and Parallel |
| Architecture | SAR (Successive Approximation) |
| Analog Input Type | Bipolar |
| Analog Input Range | ±5 V or ±10 V (input scale select pin) |
| Напряжение питания | +5 V single supply |
| Internal Reference | +2.5 V (on-chip) |
| On-Chip Track/Hold | Yes |
| Корпус | 24-pin SOIC wide body (0.295 inch / 7.50 mm width), Tape & Reel |
| Рабочая температура | -40 °C to +85 °C |
| Тип монтажа | Surface Mount |
Конфигурация выводов AD7892AR-1REEL
| Контакт 1 | VSS/AGND — Analog ground |
| Контакт 2 | DGND — Digital ground |
| Контакт 3 | VDD — +5 V supply |
| Контакт 4 | VDRIVE — Logic supply for digital interface |
| Контакт 5 | CAP — Reference bypass capacitor pin |
| Контакт 6 | REFIN/REFOUT — Reference input / 2.5 V reference output |
| Контакт 7 | AIN/HI — Analog input high |
| Контакт 8 | RANGE — Input range select (5V or 10V full scale) |
| Контакт 9 | CONVST — Conversion start input |
| Контакт 10 | BUSY — Conversion in progress output |
| Контакт 11 | EOC — End of conversion indicator |
| Контакт 12 | SCLK — Serial interface clock |
| Контакт 13 | DOUT — Serial data output |
| Контакт 14 | DIN — Serial data input (daisy-chain) |
| Контакт 15 | DRDY — Data ready / frame sync |
| Контакт 16 | CS — Chip select (active low) |
| Контакт 17 | WR — Parallel write control |
| Контакт 18 | RD — Parallel read control |
| Контакт 19 | MODE — Serial/parallel mode select |
| Контакт 20 | DB0 — Parallel data bit 0 (LSB) |
| Контакт 21 | DB1 — Parallel data bit 1 |
| Контакт 22 | DB2 — Parallel data bit 2 |
| Контакт 23 | DB3 — Parallel data bit 3 |
| Контакт 24 | DGND — Digital ground (exposed pad optional) |
Типичное применение
AD7892AR-1REEL подходит для 7 применениеs: Industrial Process Control, Motor Control Current Sensing, Multi-Channel Data Acquisition Systems, Instrumentation and Precision Transducer Digitizing, Power-Line Monitoring and Energy Meters, Medical Patient-Monitoring Front-Ends, Audio and Acoustic Test Equipment.
Industrial Process Control
The AD7892AR-1REEL's bipolar ±5 V or ±10 V input range paired with a single +5 V supply makes it ideal for digitizing 4-20 mA transmitter loop outputs, thermocouple-amplifier signals, and pressure/load-cell front-ends. Its 1.47 µs conversion time and 500 kSPS throughput let a single part multiplex four sensors at >100 kSPS each, while the on-chip 2.5 V reference removes external reference drift.
Рекомендуется
Motor Control Current Sensing
In BLDC and servo drives, the AD7892AR-1REEL samples shunt-resistor voltage drops across the three phases with sub-2 µs latency thanks to its 1.47 µs conversion time. The bipolar input directly accommodates bi-directional phase currents without external op-amp inversion, and 500 kSPS throughput supports PWM frequencies up to 50 kHz with synchronous sampling. The 24-pin SOIC package fits well within low-side shunt amplifier layouts.
Рекомендуется
Multi-Channel Data Acquisition Systems
Using the AD7892AR-1REEL with an external analog multiplexer, designers can build 8- or 16-channel data acquisition front-ends that aggregate up to 500 kSPS aggregate sample rate. The internal track/hold eliminates front-end buffer amps for settling times of <150 ns, and the serial-output mode reduces PCB routing density in slot-card PXI/cPCI designs. The wide-body SOIC handles the thermal load in densely populated chassis.
Рекомендуется
Instrumentation and Precision Transducer Digitizing
The AD7892AR-1REEL is well matched to precision load cells, strain gauges, and LVDT front-ends that produce bipolar millivolt-level outputs. Its 12-bit no-missing-codes linearity, integrated track/hold, and ±10 V input range accept conditioned signals directly, while the choice of two's-complement, offset-binary or straight-binary output codes simplifies software-side scale-and-offset calibration on 32-bit microcontrollers.
Рекомендуется
Power-Line Monitoring and Energy Meters
Single-phase and polyphase energy meters use the AD7892AR-1REEL to digitize current-transformer and Rogowski-coil outputs simultaneously with the line voltage waveform. With 500 kSPS throughput the part captures all relevant harmonics up to the 50th (per IEC 61000-4-7 instrument classes), and the bipolar input handles both half-cycles without external bias circuitry. The fixed +5 V supply simplifies isolation-barrier design.
Рекомендуется
Medical Patient-Monitoring Front-Ends
ECG, EEG, and SpO2 front-ends benefit from the AD7892AR-1REEL's bipolar input range and 12-bit linear-no-missing-codes performance when sampling electrode signals at 250-500 kSPS aggregate. The internal 2.5 V reference stabilizes ratiometric measurements, and the 24-pin SOIC package footprint is well documented for medical IEC 60601-1 dielectric clearance layouts in low-power bedside monitors.
Рекомендуется
Audio and Acoustic Test Equipment
Test and measurement equipment digitizing acoustic signals from microphones, hydrophones, and accelerometers uses the AD7892AR-1REEL for its low-noise SAR conversion at 500 kSPS, supporting wideband acoustic analysis up to 200 kHz audio bandwidth. Serial output mode keeps the PCB within tight chassis layouts. For highest-performance audio, ADI recommends the dual-channel AD7266 family.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AD7892AR-1REEL — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AD7892ARZ-1REEL | AD7892AR-1 | AD7265BCPZ-REEL | AD7264BSTZ-5-RL7 |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 24-SOIC wide body (T&R) | 24-SOIC wide body (T&R) | 24-SOIC wide body (tube) | 32-LFCSP (T&R) — footprint change | 24-LFCSP (T&R) |
| Resolution | 12-bit | 12-bit | 12-bit | 12-bit | 14-bit (upgrade) |
| Throughput (kSPS) | 500 | 500 | 500 | 1000 | 1000 |
| Input Range | ±5 V or ±10 V bipolar | ±5 V or ±10 V bipolar | ±5 V or ±10 V bipolar | 0-VREF true-differential bipolar | Differential bipolar (VREF/VSS) |
| Interface | Serial + Parallel | Serial + Parallel | Serial + Parallel | Serial-only | Serial-only |
| Supply Voltage | +5 V single | +5 V single | +5 V single | +5 V single | +5 V single |
| RoHS Status | non-RoHS (SnPb) | RoHS-compliant (matte-tin) | non-RoHS (SnPb) | RoHS-compliant | RoHS-compliant |
Ключевые отличия
- Same die with RoHS-compliant finish (против AD7892AR-1REEL (this part))
- Higher throughput in modern LFCSP (против AD7265BCPZ-REEL)
- 14-bit resolution upgrade in same family (против AD7264BSTZ-5-RL7)
Заметки по проектированию
Power the AD7892AR-1REEL from a clean +5 V analog rail; place a 10 µF tantalum + 0.1 µF ceramic pair directly at the VDD pin and repeat decoupling at the VDRIVE pin (when used). The on-chip 2.5 V reference output needs its CAP pin loaded with a 1 µF ceramic for stability. For best dynamic performance, place a ferrite bead between the analog and digital +5 V rails.
Route the analog input traces (AIN/HI, RANGE) as a guarded differential pair, kept away from the parallel data bus to reduce digital kickback. The DB0-DB11 lines should be impedance-controlled when traces exceed 50 mm. Tie unused digital inputs (CS, WR, RD) to a defined logic level - never leave them floating, or the converter's interface state becomes unpredictable at startup.
Do not exceed VDD + 0.3 V on any digital input or sink more than 50 mA through the VDD pin during hot-plug events. Mis-setting the RANGE pin to ±5 V (instead of ±10 V) while expecting bipolar 10 V swings clips the input at full scale and corrupts readings. When cascading two ADCs through DIN/DOUT, observe the daisy-chain timing diagram in the datasheet exactly, since tDSDT and tDCSH are asymmetric.
Информация о соответствии
The 'AR' suffix indicates the legacy SnPb (lead-bearing) finish and is NOT RoHS compliant. For RoHS-compliant production, choose the 'ARZ' suffix variant. This part is not AEC-Q100 qualified - not intended for automotive underhood applications.
