AD9040AJN - 10-Bit 40 MSPS ADC | Analog Devices
Артикул: AD9040AJN ✗ Снят с производстваAD9040AJN Обзор
A sampling ADC is a data-conversion IC that samples an analog voltage, holds that voltage during conversion, and produces a corresponding digital code. The AD9040AJN belongs to the ADC → data converter → analog and mixed-signal semiconductor hierarchy. Its integrated sampling and reference functions reduce the number of external components needed for high-speed waveform acquisition, while the 10-bit resolution provides 1,024 digital output codes.
The primary features are a 40 MSPS conversion rate, 10-bit resolution, a 2 V p-p analog input range, and an integrated track-and-hold circuit. The 53 dB SNR specified at a 10 MHz analog input frequency supports the use of this converter in broadband signal-processing systems where quantization noise and input bandwidth are important. CMOS-compatible digital outputs allow the ADC to interface with modern digital logic without requiring unusual output levels.
Internally, the AD9040 combines the sampling front end, reference, quantization function, and digital output stage in one monolithic device. Because an external encode signal controls the sampling sequence, the converter can be synchronized with a parallel digital acquisition system. The on-board track-and-hold circuit isolates the sampled input during the conversion interval, while the internal reference supports a complete conversion solution in a single package.
Typical uses include ultrasound imaging, medical imaging, digital oscilloscopes, and professional video equipment. In these applications, the converter can acquire repetitive waveforms and provide digital samples to a processor, FPGA, memory, or display pipeline. The 40 MSPS rate is appropriate for systems that require meaningful temporal resolution without the complexity of a multi-component front end.
Design the analog input path carefully because high-speed conversion performance depends on clean source impedance, suitable impedance matching, and controlled clock and reference behavior. Place bypass and decoupling capacitors close to the supply and reference pins, keep analog and digital return currents separated, and use a low-jitter encode source. Verify the complete input, clock, and output network against the manufacturer's application guidance.
This product overview combines the device function, principal operating characteristics, application context, and obsolete-lifecycle information with practical integration guidance. It also distinguishes the AD9040AJN from faster or higher-resolution converters by focusing on its 10-bit architecture, 40 MSPS conversion rate, integrated sampling and reference functions, and 28-pin PDIP format.
Аналоги без доработки для AD9040AJN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Для этого товара нет аналогов без доработки.
Запросить аналогиAD9040AJN Максимальные параметры и электрические характеристики
| Разрешение | 10 bit |
| Maximum Sampling Rate | 40 MSPS |
| Analog Input Range | 2 V p-p |
| Signal-to-Noise Ratio | 53 dB at 10 MHz AIN |
| Converter Type | Monolithic sampling ADC |
| Track-and-Hold | On-board track-and-hold |
| Reference | On-board reference |
| Digital Output Interface | CMOS-compatible outputs |
| Required External Control | Encode signal |
| Корпус | 28-pin PDIP |
| Тип монтажа | Through-hole |
Руководство по цоколевке AD9040AJN в корпусе 28-pin pdip
Цоколевка для AD9040AJN (корпус 28-pin pdip). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для AD9040AJN.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
AD9040AJN подходит для 6 применениеs: Digital Oscilloscope Acquisition, Ultrasound Signal Acquisition, Medical Imaging Data Acquisition, Professional Video Conversion, Industrial Waveform Monitoring, Communication Signal Sampling.
Digital Oscilloscope Acquisition
The AD9040AJN fits repetitive waveform capture in a digital oscilloscope because it converts at up to 40 MSPS and provides 10-bit output resolution. Its integrated track-and-hold captures the input during each conversion, while the internal reference reduces the number of required analog support components. A practical implementation should use a low-jitter encode signal, a controlled input driver, and separate analog and digital return paths. The 1,024-code output resolution is suitable for general-purpose waveform visualization, although fine amplitude measurements may require additional calibration, averaging, or a higher-resolution converter.
Рекомендуется
Ultrasound Signal Acquisition
The AD9040AJN is applicable to ultrasound receiver paths that sample returning analog waveforms and transfer them into digital processing. Its 40 MSPS conversion rate supports timed acquisition of echo signals, while the 10-bit resolution and 53 dB SNR at a 10 MHz AIN frequency provide a defined dynamic-performance target. The converter’s integrated track-and-hold and reference simplify the receiver channel. The analog front end still requires appropriate gain, attenuation, filtering, and impedance matching so that the ADC receives a controlled signal without excessive band-limiting or distortion.
Рекомендуется
Medical Imaging Data Acquisition
The AD9040AJN can serve as the sampling element in medical imaging electronics that digitize bounded analog waveforms for subsequent processing. Its 40 MSPS rate is useful for capturing rapidly changing diagnostic-sensor signals, and the integrated track-and-hold and reference reduce external circuit count. For these systems, the 10-bit resolution should be checked against the smallest signal amplitude that must remain distinguishable after gain control and filtering. Grounding, isolation, clock distribution, and the separation of sensitive analog inputs from digital switching paths are as important as the ADC’s headline conversion rate.
Рекомендуется
Professional Video Conversion
The AD9040AJN can participate in professional video acquisition systems requiring a 10-bit parallel conversion interface at up to 40 MSPS. The CMOS-compatible digital outputs provide a straightforward connection to downstream capture logic, and the integrated track-and-hold and reference support a compact converter implementation. Designers should treat the encode source as a precision timing input because sampling jitter affects video timing and image quality. Input filtering, gain calibration, and data-clock alignment must also be coordinated with the video standard and the receiving FPGA or processor.
Рекомендуется
Industrial Waveform Monitoring
The AD9040AJN is suitable for industrial monitoring systems that capture periodic sensor outputs for analysis, fault detection, or process control. Its 40 MSPS conversion capability preserves temporal information across a broader frequency range than a lower-rate converter, while 10-bit resolution provides 1,024 digital levels per sample. The integrated sampling function and internal reference help reduce circuit complexity. For reliable operation, the analog input should be conditioned for the required bandwidth and amplitude, the encode signal should have low jitter, and grounding should prevent motor, relay, or switching-node currents from corrupting the measured waveform.
Рекомендуется
Communication Signal Sampling
The AD9040AJN can be used in communication-related test and monitoring equipment when a sampled representation of a 2 V p-p analog waveform is needed. Its 10-bit resolution, 40 MSPS maximum sampling rate, and 53 dB SNR at a 10 MHz AIN frequency create a useful starting point for receiver characterization and envelope or waveform analysis. Performance depends on presenting a controlled full-scale input with low distortion and low phase noise. The encode clock, input bandwidth, output timing, and downstream digital filtering should therefore be evaluated together rather than selecting the converter from sampling rate alone.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AD9040AJN — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Заметки по проектированию
Treat the encode signal as a precision clock input because timing error directly limits the useful sampling bandwidth and can create code-to-code jitter in the digital output. Use a low-jitter, clean clock source; route it away from analog input and reference nodes; and terminate it according to the manufacturer’s recommended topology. Verify acquisition accuracy with a stable source before attributing errors to the ADC.
Place the analog input network close to the ADC and keep the route from the signal source short to minimize pickup and parasitic loading. Separate analog and digital return currents where possible, use a deliberate ground strategy, and keep high-speed digital outputs away from the analog input. The high-speed sampling behavior makes small routing changes more consequential than they would be in a low-frequency data-acquisition circuit.
Do not assume that any 10-bit or 40 MSPS ADC is a drop-in replacement. A valid substitute for the AD9040AJN must reproduce the 28-pin PDIP pinout, digital output arrangement, supply requirements, reference behavior, and timing interface. Because the device is obsolete, validate the complete schematic and PCB before committing to a replacement, especially enable, encode, reference, and analog-output connections.
Информация о соответствии
The AD9040AJN is an obsolete commercial ADC rather than an automotive-qualified AEC-Q100 product. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation for the exact legacy package.