Analog Devices

AD9040AJN - 10-Bit 40 MSPS ADC | Analog Devices

MPN: AD9040AJN ✗ پایان تولید
28-pin PDIP Package
حداقل سفارش: 1 |

AD9040AJN نمای کلی

Analog Devices AD9040AJN is an obsolete 10-bit monolithic sampling analog-to-digital converter that converts analog inputs at up to 40 MSPS. It includes an on-board track-and-hold circuit and an internal reference, accepts a 2 V p-p CMOS-compatible analog input, and provides a 53 dB SNR at a 10 MHz AIN frequency. The device is packaged in a 28-pin PDIP.

A sampling ADC is a data-conversion IC that samples an analog voltage, holds that voltage during conversion, and produces a corresponding digital code. The AD9040AJN belongs to the ADC → data converter → analog and mixed-signal semiconductor hierarchy. Its integrated sampling and reference functions reduce the number of external components needed for high-speed waveform acquisition, while the 10-bit resolution provides 1,024 digital output codes.

The primary features are a 40 MSPS conversion rate, 10-bit resolution, a 2 V p-p analog input range, and an integrated track-and-hold circuit. The 53 dB SNR specified at a 10 MHz analog input frequency supports the use of this converter in broadband signal-processing systems where quantization noise and input bandwidth are important. CMOS-compatible digital outputs allow the ADC to interface with modern digital logic without requiring unusual output levels.

Internally, the AD9040 combines the sampling front end, reference, quantization function, and digital output stage in one monolithic device. Because an external encode signal controls the sampling sequence, the converter can be synchronized with a parallel digital acquisition system. The on-board track-and-hold circuit isolates the sampled input during the conversion interval, while the internal reference supports a complete conversion solution in a single package.

Typical uses include ultrasound imaging, medical imaging, digital oscilloscopes, and professional video equipment. In these applications, the converter can acquire repetitive waveforms and provide digital samples to a processor, FPGA, memory, or display pipeline. The 40 MSPS rate is appropriate for systems that require meaningful temporal resolution without the complexity of a multi-component front end.

Design the analog input path carefully because high-speed conversion performance depends on clean source impedance, suitable impedance matching, and controlled clock and reference behavior. Place bypass and decoupling capacitors close to the supply and reference pins, keep analog and digital return currents separated, and use a low-jitter encode source. Verify the complete input, clock, and output network against the manufacturer's application guidance.

This product overview combines the device function, principal operating characteristics, application context, and obsolete-lifecycle information with practical integration guidance. It also distinguishes the AD9040AJN from faster or higher-resolution converters by focusing on its 10-bit architecture, 40 MSPS conversion rate, integrated sampling and reference functions, and 28-pin PDIP format.

جایگزین‌های drop-in برای AD9040AJN — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

AD9040AJN حداکثر مقادیر مجاز و مشخصات الکتریکی

رزولوشن 10 bit
Maximum Sampling Rate 40 MSPS
Analog Input Range 2 V p-p
Signal-to-Noise Ratio 53 dB at 10 MHz AIN
Converter Type Monolithic sampling ADC
Track-and-Hold On-board track-and-hold
Reference On-board reference
Digital Output Interface CMOS-compatible outputs
Required External Control Encode signal
بسته‌بندی 28-pin PDIP
نوع نصب Through-hole

راهنمای پیکربندی پین AD9040AJN 28-pin pdip

پیکربندی پین برای AD9040AJN (پکیج 28-pin pdip). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 28-pin pdip برای AD9040AJN

داده پین‌آوت تفصیلی موجود نیست برای AD9040AJN.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

AD9040AJN مناسب است برای 6 کاربردs: Digital Oscilloscope Acquisition, Ultrasound Signal Acquisition, Medical Imaging Data Acquisition, Professional Video Conversion, Industrial Waveform Monitoring, Communication Signal Sampling.

📺

Digital Oscilloscope Acquisition

The AD9040AJN fits repetitive waveform capture in a digital oscilloscope because it converts at up to 40 MSPS and provides 10-bit output resolution. Its integrated track-and-hold captures the input during each conversion, while the internal reference reduces the number of required analog support components. A practical implementation should use a low-jitter encode signal, a controlled input driver, and separate analog and digital return paths. The 1,024-code output resolution is suitable for general-purpose waveform visualization, although fine amplitude measurements may require additional calibration, averaging, or a higher-resolution converter.

💊

Ultrasound Signal Acquisition

The AD9040AJN is applicable to ultrasound receiver paths that sample returning analog waveforms and transfer them into digital processing. Its 40 MSPS conversion rate supports timed acquisition of echo signals, while the 10-bit resolution and 53 dB SNR at a 10 MHz AIN frequency provide a defined dynamic-performance target. The converter’s integrated track-and-hold and reference simplify the receiver channel. The analog front end still requires appropriate gain, attenuation, filtering, and impedance matching so that the ADC receives a controlled signal without excessive band-limiting or distortion.

🏥

Medical Imaging Data Acquisition

The AD9040AJN can serve as the sampling element in medical imaging electronics that digitize bounded analog waveforms for subsequent processing. Its 40 MSPS rate is useful for capturing rapidly changing diagnostic-sensor signals, and the integrated track-and-hold and reference reduce external circuit count. For these systems, the 10-bit resolution should be checked against the smallest signal amplitude that must remain distinguishable after gain control and filtering. Grounding, isolation, clock distribution, and the separation of sensitive analog inputs from digital switching paths are as important as the ADC’s headline conversion rate.

📺

Professional Video Conversion

The AD9040AJN can participate in professional video acquisition systems requiring a 10-bit parallel conversion interface at up to 40 MSPS. The CMOS-compatible digital outputs provide a straightforward connection to downstream capture logic, and the integrated track-and-hold and reference support a compact converter implementation. Designers should treat the encode source as a precision timing input because sampling jitter affects video timing and image quality. Input filtering, gain calibration, and data-clock alignment must also be coordinated with the video standard and the receiving FPGA or processor.

🏭

Industrial Waveform Monitoring

The AD9040AJN is suitable for industrial monitoring systems that capture periodic sensor outputs for analysis, fault detection, or process control. Its 40 MSPS conversion capability preserves temporal information across a broader frequency range than a lower-rate converter, while 10-bit resolution provides 1,024 digital levels per sample. The integrated sampling function and internal reference help reduce circuit complexity. For reliable operation, the analog input should be conditioned for the required bandwidth and amplitude, the encode signal should have low jitter, and grounding should prevent motor, relay, or switching-node currents from corrupting the measured waveform.

🌐

Communication Signal Sampling

The AD9040AJN can be used in communication-related test and monitoring equipment when a sampled representation of a 2 V p-p analog waveform is needed. Its 10-bit resolution, 40 MSPS maximum sampling rate, and 53 dB SNR at a 10 MHz AIN frequency create a useful starting point for receiver characterization and envelope or waveform analysis. Performance depends on presenting a controlled full-scale input with low distortion and low phase noise. The encode clock, input bandwidth, output timing, and downstream digital filtering should therefore be evaluated together rather than selecting the converter from sampling rate alone.

خلاصه محصولات پیشنهادی

AD9040AJN Analog Devices استفاده‌شده در: Digital Oscilloscope Acquisition, Ultrasound Signal Acquisition, Medical Imaging Data Acquisition, Professional Video Conversion, Industrial Waveform Monitoring, Communication Signal Sampling AD9040 ADC family استفاده‌شده در: Digital Oscilloscope Acquisition, Ultrasound Signal Acquisition, Medical Imaging Data Acquisition, Professional Video Conversion, Industrial Waveform Monitoring, Communication Signal Sampling
What is the AD9040AJN?
The AD9040AJN is a 10-bit monolithic sampling analog-to-digital converter capable of 40 MSPS conversion. It includes an on-board track-and-hold circuit and an internal reference in a 28-pin PDIP package. According to the Analog Devices AD9040 product page, it is designed as a complete low-cost, high-performance converter requiring an encode signal for sampling control.
What is the resolution and maximum sampling rate of AD9040AJN?
The AD9040AJN provides 10-bit resolution and operates at up to 40 MSPS. A 10-bit converter represents each sample with 1,024 digital codes. The 40 MSPS rating means the device can complete approximately 40 million conversions per second, making it suitable for moderate-bandwidth digital oscilloscope, imaging, ultrasound, and video acquisition systems.
What is the analog input range of AD9040AJN?
The AD9040AJN accepts a 2 V p-p CMOS-compatible analog input. The Analog Devices AD9040 datasheet listing identifies the 2 V p-p input range, on-board track-and-hold, and integrated reference as defining characteristics. The input driver and source impedance should be designed to preserve full-scale range and dynamic performance across the intended sampling bandwidth.
What signal-to-noise ratio does AD9040AJN provide?
The AD9040AJN provides 53 dB SNR with a 10 MHz AIN frequency. This figure is specified by Analog Devices for the complete 10-bit converter. SNR is an important system metric because it indicates how much the converter's output noise limits the ability to distinguish small signals from the quantized and reconstructed waveform.
Does AD9040AJN include a track-and-hold circuit and reference?
Yes, the AD9040AJN includes an on-board track-and-hold circuit and an on-board reference. These functions are integrated into the monolithic converter, reducing the external circuitry required for a complete sampling ADC. The sample-and-hold function captures the analog input, and the encode signal controls the timing of the conversion sequence.
Where can I download the AD9040AJN datasheet PDF?
The official AD9040 datasheet and product information is available from the Analog Devices product page at https://www.analog.com/en/products/ad9040.html. Follow the datasheet link on that page for the complete PDF, including the pin description, electrical characteristics, timing information, and application guidance for the AD9040AJN.
Where can I find the AD9040AJN pinout?
The AD9040AJN pin assignments are documented in the pin-description table of the Analog Devices AD9040 datasheet. The device uses a 28-pin PDIP package. Use that table when assigning the analog input, supply, ground, reference, encode, and digital output connections because the package drawing alone does not define each terminal's function.
Is AD9040AJN still active?
No, Analog Devices marks the AD9040AJN as obsolete. The AD9040 product page identifies the device as an obsolete complete 10-bit monolithic sampling ADC. Because it is not a current-production device, engineers should verify availability and lifecycle requirements before starting a new production design.
What applications are suitable for AD9040AJN?
The AD9040AJN is suitable for ultrasound, medical imaging, digital oscilloscopes, and professional video acquisition. Its 10-bit resolution and 40 MSPS conversion rate suit repetitive high-speed waveform sampling, while the integrated track-and-hold and reference simplify the analog front end. The system clock and post-processing resolution should be matched to the required measurement bandwidth.
When should I choose AD9040AJN over a higher-resolution ADC?
Choose the AD9040AJN when 10-bit resolution, a 40 MSPS maximum rate, and the integrated sampling and reference functions satisfy the design. Select a higher-resolution converter when amplitude accuracy, dynamic range, or minimum detectable input amplitude requires more than 1,024 output codes. The converter’s obsolete lifecycle must also be considered for new designs.
Can AD9040AJN be used for digital oscilloscope acquisition?
Yes, the AD9040AJN can be used for digital oscilloscope acquisition because it supports 40 MSPS sampling and includes a track-and-hold circuit. Its 10-bit resolution limits vertical precision to 1,024 codes, so it is most appropriate when cost, input bandwidth, and sampling rate matter more than maximum vertical resolution. Clock jitter and analog input conditioning remain critical.
What is the best drop-in replacement for AD9040AJN?
No verified pin-to-pin drop-in replacement for the AD9040AJN is identified in the available manufacturer and cross-reference information. A replacement must match the 28-pin PDIP footprint, 10-bit output interface, 40 MSPS operating class, supply arrangement, and timing requirements. Do not treat a general 10-bit or 40 MSPS ADC as a drop-in part unless its complete pinout and electrical characteristics have been verified.
What can replace AD9040AJN in an existing design?
A valid replacement for the AD9040AJN must be selected by function rather than by converter speed alone. The candidate should provide 10-bit resolution, a compatible 40 MSPS sampling rate, a matching parallel digital interface, and an equivalent 28-pin PDIP pinout if the PCB cannot be changed. Analog Devices’ product page or the Request a Quote form on this page can help identify an appropriate sourcing path.
Is AD9040AJN the same as AD9042?
No, the AD9040AJN and AD9042 are not drop-in equivalents. The AD9040AJN is a 10-bit converter operating at up to 40 MSPS, while the Analog Devices AD9042 is a 12-bit high-speed converter operating at 41 MSPS. Their resolution, interface, and exact pin arrangements must be compared before either part can replace the other.
Where to buy AD9040AJN and what is its lead time?
Use the Request a Quote form on this page to ask about AD9040AJN availability, current sourcing, and lead time for the obsolete 28-pin PDIP device. The part is not represented as a current active production item, so schedule confirmation is important for repair, redesign, and legacy-production programs. The form connects the request directly with the XAIPART sourcing team.

داده‌های مرجع مهندسی برای AD9040AJN — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the AD9040AJN for a legacy or repair design that specifically requires a 10-bit, 40 MSPS sampling ADC with an integrated track-and-hold, an on-board reference, and a 28-pin PDIP package. Its 2 V p-p CMOS-compatible input and 53 dB SNR at 10 MHz make it suitable for ultrasound, medical imaging, oscilloscope, professional video, and waveform-monitoring applications. However, the manufacturer classifies the product as obsolete, so new designs should confirm lifecycle constraints before committing. The AD9042 offers greater resolution at 12 bits but is not a pin-compatible substitute. No verified drop-in replacement was identified, so any alternative requires complete pinout, timing, interface, and electrical validation. For applications requiring higher vertical resolution, lower latency, different supply arrangements, or a modern surface-mount package, redesigning around a current converter may be more reliable than sourcing an unverified replacement.

یادداشت‌های طراحی

Treat the encode signal as a precision clock input because timing error directly limits the useful sampling bandwidth and can create code-to-code jitter in the digital output. Use a low-jitter, clean clock source; route it away from analog input and reference nodes; and terminate it according to the manufacturer’s recommended topology. Verify acquisition accuracy with a stable source before attributing errors to the ADC.

Place the analog input network close to the ADC and keep the route from the signal source short to minimize pickup and parasitic loading. Separate analog and digital return currents where possible, use a deliberate ground strategy, and keep high-speed digital outputs away from the analog input. The high-speed sampling behavior makes small routing changes more consequential than they would be in a low-frequency data-acquisition circuit.

Do not assume that any 10-bit or 40 MSPS ADC is a drop-in replacement. A valid substitute for the AD9040AJN must reproduce the 28-pin PDIP pinout, digital output arrangement, supply requirements, reference behavior, and timing interface. Because the device is obsolete, validate the complete schematic and PCB before committing to a replacement, especially enable, encode, reference, and analog-output connections.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The AD9040AJN is an obsolete commercial ADC rather than an automotive-qualified AEC-Q100 product. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation for the exact legacy package.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

AD9040AJN datasheet AD9040AJN pinout AD9040AJN datasheet pdf AD9040AJN 40 MSPS ADC AD9040AJN 28-pin PDIP AD9040AJN equivalent AD9040AJN replacement AD9040AJN cross reference AD9040AJN vs AD9042 AD9040AJN price AD9040AJN stock Analog Devices AD9040AJN

قطعات و اصطلاحات مرتبط

Analog Devices AD9040AJN AD9040 AD9042 analog-to-digital converter ADC sampling ADC data converter monolithic converter track-and-hold on-board reference 10-bit resolution 40 MSPS 2 V p-p input 53 dB SNR CMOS-compatible output 28-pin PDIP through-hole package encode signal ultrasound imaging medical imaging digital oscilloscope professional video industrial waveform monitoring
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ