Analog Devices

AD977AAN - 16-Bit 200 kSPS BiCMOS ADC | Analog Devices

Артикул: AD977AAN ✗ Снят с производства
5 V single supply Vdss 20-pin through-hole DIP Package
MOQ: 1 |

AD977AAN Обзор

Analog Devices AD977AAN is a 16-bit successive-approximation analog-to-digital converter with a 200 kSPS throughput rate, single 5 V operation, and a 20-pin through-hole DIP package. It accepts unipolar input ranges of 0–5 V and 0–4 V or bipolar input ranges of ±5 V and ±3.3 V, making it suitable for precision signal acquisition, industrial instrumentation, communications, and data-acquisition systems.

An ADC is an interface IC that converts continuous analog voltages into digital codes for processing by a microcontroller, DSP, FPGA, or communications system. The AD977A belongs to the successive-approximation ADC hierarchy, using a comparator, internal DAC, and successive conversion stages to balance conversion speed, resolution, power consumption, and implementation complexity. It is designed for accurate digitization of moderately high-frequency signals rather than waveform capture at megahertz rates.

The AD977AAN provides 16-bit resolution, a 200 kSPS maximum throughput rate, and operation from a single 5 V supply. Maximum power dissipation is listed at 100 mW, while power-down operation reduces consumption when the converter is not sampling. Selectable unipolar and bipolar input ranges allow the same converter architecture to serve sensors, transducer outputs, and conditioned analog signals. An external reference and external clock options support flexible system timing and calibration.

Internally, the device uses a BiCMOS implementation that combines bipolar and CMOS circuitry. The AD977 part in the family supports 100 kSPS throughput, whereas the AD977A supports 200 kSPS. This distinction is important during replacement because the faster AD977A should not be treated as electrically identical to the 100 kSPS AD977 when acquisition timing or digital-interface timing is fixed by the host processor.

Typical uses include multichannel process-control instrumentation, programmable logic controllers, communications receivers, laboratory measurement equipment, and embedded data-acquisition systems. The 20-pin DIP format also supports prototyping and automated test systems where through-hole insertion and socketed assembly are preferred over fine-pitch surface-mount packages.

Designers should establish analog signal conditioning before the converter, use a clean reference source, and account for acquisition time when initiating each conversion. The input network, grounding, reference routing, and digital interface require careful layout to prevent noise or switching activity from degrading the 16-bit result. A parallel data interface also requires suitable bus timing and signal-integrity review at the connected processor.

This product page combines manufacturer specifications, package information, application guidance, a structured engineering comparison, and practical design notes. It is intended to help engineers confirm interface compatibility, evaluate acquisition timing, and determine whether the AD977AAN satisfies a system’s resolution, input-range, supply, and mechanical requirements.

Аналоги без доработки для AD977AAN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с AD977AAN (тот же форм-фактор и посадочное место) — отличается по Package, Supply Voltage, Throughput Rate, Internal Reference, Architecture.

Analog Devices
Package: 20-pin PDIP, 0.300 in (7.62 mm) pitch
Supply Voltage: 5 V
Throughput Rate: 200 kSPS
Сравнить с AD977AAN →
Analog Devices
Package: 20-pin PDIP
Throughput Rate: 100 kSPS
Internal Reference: 2.5 V internal reference
Сравнить с AD977AAN →
Analog Devices
Package: 20-pin PDIP
Supply Voltage: 5 V
Throughput Rate: 200 kSPS
Сравнить с AD977AAN →
Analog Devices
Package: 20-pin PDIP
Supply Voltage: 5 V
Throughput Rate: 100 kSPS
Сравнить с AD977AAN →

AD977AANZ

✅ Прямая замена
Analog Devices
📦 20-pin PDIP
Successive-approximation ADC · 16 bit · 1 channel · 200 kSPS · 5 V · 2.5 V · Supported · Switched-capacitor SAR

Уточнить цену

Открыть даташит →

AD977ABN

✅ Прямая замена
Analog Devices
📦 20-pin PDIP
Successive-approximation ADC · 16 bit · 100 kSPS · Single-ended · BiCMOS switched-capacitor ADC · 5 V single supply · 100 mW maximum · 50 W

Уточнить цену

Открыть даташит →

AD977AAN Максимальные параметры и электрические характеристики

Converter Type Successive-approximation ADC
Разрешение 16 bit
AD977A Throughput Rate 200 kSPS
AD977 Throughput Rate 100 kSPS
Напряжение питания 5 V single supply
Maximum Supply Voltage 5.25 V
Maximum Power Dissipation 100 mW
Unipolar Input Range 0 V to 5 V or 0 V to 4 V
Bipolar Input Range -5 V to +5 V or -3.3 V to +3.3 V
Temperature Grade Industrial
Maximum Operating Temperature +85 °C
Корпус 20-pin through-hole DIP
Terminal Count 20
Тип монтажа Through-hole

Руководство по цоколевке AD977AAN в корпусе 20-pin through-hole dip

Цоколевка для AD977AAN (корпус 20-pin through-hole dip). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 20-pin through-hole dip для AD977AAN

Нет подробных данных о распиновке для AD977AAN.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

AD977AAN подходит для 6 применениеs: Industrial Process Measurement, Communications Receiver, Data-Acquisition System, Laboratory Instrumentation, Programmable Logic Controller, Automated Test Equipment.

🏭

Industrial Process Measurement

The AD977AAN fits industrial process-control systems that must digitize slow or moderately varying sensor signals with 16-bit resolution. Its 200 kSPS throughput provides ample conversion margin for pressure, temperature, flow, and level transducer channels, while selectable 0–5 V, 0–4 V, ±5 V, and ±3.3 V inputs can simplify interface matching to conditioned transmitter outputs. The single 5 V supply simplifies system power distribution, and the listed 100 mW maximum power dissipation supports compact multi-channel measurement hardware. Use a front-end amplifier or filter when sensor outputs require attenuation, gain, isolation, or anti-alias filtering, and verify the converter’s complete sample-and-hold acquisition behavior before setting the channel update rate.

🌐

Communications Receiver

The AD977AAN is appropriate for communications receiver front ends that require accurate conversion of conditioned intermediate-frequency or baseband signals at rates up to 200 kSPS. Its 16-bit resolution can preserve low-level modulation detail after suitable amplification, while the 200 kSPS conversion rate supports digital demodulation, filtering, and symbol-rate processing. The selectable bipolar inputs are useful when the receiver presents a centered analog waveform, although signal amplitude, common-mode voltage, and driver capability must remain within the selected operating configuration. Keep the analog input path short and controlled, provide a stable reference, and isolate converter switching from sensitive RF and baseband nodes to prevent degradation of receiver signal integrity.

🖥️

Data-Acquisition System

The AD977AAN serves as the acquisition converter in a compact laboratory or embedded data-acquisition system requiring 16-bit numerical resolution without the complexity of a very high-speed ADC. Its 200 kSPS maximum rate supports multi-channel analog monitoring when channels are sampled sequentially or through synchronized front ends. The 20-pin DIP package simplifies breadboard, socket, and automated-test implementations and is useful during system bring-up. Designers should account for acquisition time when calculating the effective per-channel sampling interval and should implement anti-alias filtering appropriate to the selected update rate. A low-noise reference and careful return-path design are essential because reference disturbance and ground bounce can affect conversion accuracy.

🔧

Laboratory Instrumentation

The AD977AAN is well matched to laboratory instruments that digitize slow sensor, transducer, or calibration signals with high numerical resolution. A 16-bit converter can improve dynamic range and reduce quantization error relative to lower-resolution converters, while the 200 kSPS throughput supports responsive measurements without requiring a flash ADC. The DIP package is particularly convenient for prototype instruments and fixture-based service equipment. For accurate results, the analog input should be buffered, protected against overvoltage, and filtered before entering the converter. The reference should remain stable during each acquisition, and the instrument should avoid injecting large data-bus transitions close to sensitive input and reference nodes.

⚙️

Programmable Logic Controller

The AD977AAN can be used in a programmable logic controller or embedded industrial controller for analog supervisory channels, condition monitoring, and closed-loop process inputs. Its 16-bit resolution provides useful precision, and the 200 kSPS rate allows each conversion to complete well before typical PLC scan cycles require updated data. Single 5 V operation simplifies interface to modern control electronics, although logic-level compatibility must be checked against the host interface. Add input protection and conditioning for field wiring, isolate high-energy transients before the converter, and establish a defined startup sequence so the reference and analog inputs settle before the controller trusts the first conversion result.

🧪

Automated Test Equipment

The AD977AAN is suited to automated test equipment that measures analog outputs, verifies converters, or captures low-frequency stimulus-response data. The 20-pin through-hole DIP package simplifies insertion into sockets and reduces sensitivity to the assembly complexity associated with fine-pitch devices. Its 16-bit resolution supports characterization of precision signals, and 200 kSPS provides sufficient timing margin for production-test cycle times. Fixture designers should minimize long analog traces, provide clean grounds, and separate digital test-control activity from the input network. Verify the settling time of the source under test, perform a zero-scale or full-scale calibration as appropriate, and account for converter acquisition time when calculating the required measurement interval.

Сводка рекомендуемых товаров

AD977AAN Analog Devices Используется в: Industrial Process Measurement, Communications Receiver, Data-Acquisition System, Laboratory Instrumentation, Programmable Logic Controller, Automated Test Equipment AD977A Related AD977A family converter Используется в: Industrial Process Measurement, Communications Receiver, Data-Acquisition System, Laboratory Instrumentation, Programmable Logic Controller, Automated Test Equipment
What are the key specifications of AD977AAN that engineers should know?
The AD977AAN is a 16-bit, 200 kSPS successive-approximation ADC operated from a single 5 V supply in a 20-pin DIP package. Its selectable input ranges include 0–5 V, 0–4 V, ±5 V, and ±3.3 V, and maximum power dissipation is 100 mW. According to the Analog Devices AD977A product page and datasheet, these parameters position the device for precision industrial, communications, instrumentation, and embedded data-acquisition systems.
What is the conversion throughput of AD977AAN?
The AD977AAN converts at up to 200 kSPS. Analog Devices specifies the AD977A version for 200 kSPS throughput and the related AD977 version for 100 kSPS. This distinction is critical in timing-sensitive systems because replacing the AD977 with AD977AAN changes the maximum acquisition rate from 100 kSPS to 200 kSPS and can affect host timing, digital update rate, and downstream filter design.
What is the resolution and architecture of AD977AAN?
The AD977AAN is a 16-bit successive-approximation analog-to-digital converter built with BiCMOS circuitry. According to the Analog Devices datasheet, it accepts both unipolar and bipolar analog inputs while operating from one 5 V supply. The architecture is appropriate for high-precision measurement and control systems that require more resolution than an 8-bit or 12-bit converter but do not require the very high sampling rates of a pipeline or flash ADC.
What input voltage ranges does AD977AAN support?
The AD977AAN supports unipolar ranges of 0–5 V and 0–4 V, as well as bipolar ranges of ±5 V and ±3.3 V. The Analog Devices datasheet identifies these as the selectable input configurations for the AD977A family. The appropriate range must be configured in the analog front end and signal-conditioning circuitry; verify the complete pin description and reference arrangement in the manufacturer datasheet before assigning PCB connections.
Where can I download the AD977AAN datasheet PDF?
The official AD977A documentation is available from the Analog Devices product page at https://www.analog.com/en/products/ad977a.html. The page provides manufacturer technical documentation for the AD977 and AD977A family, while the AD977AAN datasheet PDF is also indexed through the document links listed on this page. Use the manufacturer document for final electrical characteristics, pin functions, timing diagrams, and ordering information.
Where can I find the AD977AAN pinout?
The AD977AAN uses a 20-pin through-hole DIP package, and its complete pin-assignment diagram appears in the Analog Devices AD977A datasheet. The pin-description table should be used to identify analog inputs, reference connections, digital data lines, control signals, clock inputs, and supply pins. Because a complete manufacturer pin list was not exposed in the product summary, use the datasheet rather than assigning connections from the package outline alone.
Can AD977AAN replace the AD977 in an existing circuit?
The AD977AAN should not be assumed to be a drop-in replacement for the 100 kSPS AD977. The Analog Devices product page distinguishes the AD977 at 100 kSPS from the AD977A at 200 kSPS, indicating a 100% increase in maximum throughput. A board-level replacement requires verification of package, pin functions, acquisition timing, reference handling, digital output behavior, and the host processor’s sampling schedule.
What is the best drop-in replacement for AD977AAN?
No verified 20-pin DIP, pin-to-pin-compatible replacement for the AD977AAN was identified in the available cross-reference results. Cross-reference searches returned family-related ordering codes, but those listings did not establish that every candidate has the same package, pinout, electrical configuration, and timing behavior. Treat any proposed substitution as a redesign candidate until its package and manufacturer pin-description table are checked directly.
Is there a cross-brand equivalent for AD977AAN?
No verified cross-brand drop-in equivalent for the AD977AAN was identified. A qualified replacement must match the 20-pin DIP footprint, 16-bit architecture, input-range options, 5 V supply, reference arrangement, and data-interface timing; merely offering similar resolution and sample rate is insufficient. Request detailed engineering review when a cross-brand candidate is proposed for an existing acquisition board.
When should I choose AD977AAN over a lower-speed ADC?
Choose the AD977AAN when a design needs 16-bit resolution, a maximum throughput of 200 kSPS, and selectable unipolar or bipolar inputs from a single 5 V supply. It is well suited to industrial control, communications, and laboratory acquisition where 16-bit measurement quality matters more than the lower cost or lower power of a simpler converter. The 20-pin DIP package also favors prototypes, socketed assemblies, and automated test systems.
Is AD977AAN suitable for industrial instrumentation?
Yes, the AD977AAN is suitable for many industrial instrumentation designs because it combines 16-bit resolution, 200 kSPS throughput, a single 5 V supply, and an industrial temperature grade. The Analog Devices listing identifies the maximum operating temperature as +85 °C. Its 100 mW maximum power dissipation also makes it practical for distributed measurement systems where converter power must remain modest.
What can replace AD977AAN?
No part can be confirmed as a direct replacement from the available cross-reference information. The safest replacement process is to search for a 20-pin DIP converter with 16-bit resolution, no less than 200 kSPS throughput, equivalent unipolar and bipolar input options, and a compatible reference and digital interface. Verify pin assignments and acquisition timing on the manufacturer datasheet before authorizing a substitution.
Is AD977AAN the same as AD977A?
No. AD977AAN is the 200 kSPS AD977A device in a 20-pin DIP package, while the AD977 family member supports 100 kSPS. According to the Analog Devices product page, the distinguishing performance attribute is throughput: AD977A provides twice the maximum sampling rate of AD977. Their electrical, timing, and interchangeability implications must therefore be reviewed separately.
How much power does AD977AAN consume?
The maximum power dissipation of the AD977AAN is 100 mW. The Analog Devices datasheet also identifies a power-down mode, which can reduce consumption when active conversion is not required. Actual system dissipation depends on the 5 V supply voltage and operating mode, so use the device’s power-down and active-state information when estimating battery, thermal, and power-budget requirements.
Where to buy AD977AAN online and what is its lead time?
Use the Request a Quote form on this page to request AD977AAN availability, current lead time, minimum order quantity, and a formal quotation. Quote requests are the appropriate purchasing path for this product because current channel pricing and inventory can change independently of the manufacturer’s technical specifications. Include the required package, quantity, date code, and shipment destination with the request.

Справочные инженерные данные для AD977AAN — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the AD977AAN when a design requires 16-bit resolution, up to 200 kSPS throughput, a single 5 V supply, and selectable unipolar or bipolar input ranges in a 20-pin DIP package. It is especially useful for industrial process measurement, communications receivers, laboratory instruments, and prototypes where through-hole assembly simplifies integration. Do not treat it as a drop-in substitute for the 100 kSPS AD977 without reviewing timing and acquisition behavior, because the maximum conversion rate doubles. No verified cross-brand or same-brand drop-in replacement was established for the exact AD977AAN configuration. If sourcing continuity is critical, evaluate an alternative only after confirming its package, pin functions, reference design, input ranges, digital interface, and acquisition timing against the manufacturer datasheets.

Сравнение с аналогами

Параметр Этот товар
Package 20-pin through-hole DIP
Brand Analog Devices
Resolution 16 bit
Throughput Rate 200 kSPS
Supply 5 V single supply
Unipolar Inputs 0–5 V or 0–4 V
Bipolar Inputs ±5 V or ±3.3 V
Maximum Power Dissipation 100 mW
Power-Down Mode Yes
Maximum Operating Temperature +85 °C

Ключевые отличия

  • Doubled throughput within the related AD977 family (против AD977)
  • Higher numerical resolution for precision acquisition (против AD977)
  • Through-hole construction simplifies prototype integration (против Surface-mount AD977A order variants)

Заметки по проектированию

Route the analog input directly to the converter through a short, shielded path and place input filtering components close to the relevant pins. Keep digital data and control traces away from the input and reference nodes, and provide a low-impedance ground return for the converter and its front end. Breadboard or long-probe layouts can introduce pickup that is significant relative to a 16-bit converter, so use a controlled PCB or fixture when measuring low-level signals.

Decouple the single 5 V supply near the device and keep the return current out of sensitive analog-ground paths. Verify the reference arrangement and startup behavior in the manufacturer datasheet before applying power. Because the converter can dissipate up to 100 mW, provide adequate local copper and ventilation in dense instrumentation. Power-down mode can reduce consumption between measurements, but control-state transitions must not create unstable reference or input conditions.

Do not assume that the 100 kSPS AD977 and the 200 kSPS AD977AAN are interchangeable. Host sampling code, acquisition timing, filter cutoffs, and digital bus timing may depend on the specified conversion rate. Also verify the selected input range and external reference configuration rather than inferring them from the package. Calibration and measurement uncertainty should include reference accuracy, analog noise, and acquisition settling.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The available product summaries do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact AD977AAN ordering code.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ad977a datasheet AD977AAN datasheet AD977AAN datasheet pdf AD977AAN pinout AD977AAN 16 bit ADC AD977AAN 200 kSPS AD977AAN single 5 V supply AD977AAN DIP-20 AD977AAN equivalent AD977AAN replacement AD977AAN vs AD977 Analog Devices AD977AAN AD977AAN price AD977AAN lead time AD977AAN application circuit

Связанные компоненты & термины

Analog Devices AD977AAN AD977A AD977 16-bit ADC analog-to-digital converter successive-approximation ADC BiCMOS single 5 V supply 200 kSPS 100 kSPS unipolar input bipolar input 16-bit resolution 100 mW power dissipation power-down mode industrial temperature grade 20-pin DIP through-hole package acquisition time external reference data acquisition industrial process control communications receiver laboratory instrumentation
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ