AD977AAN - 16-Bit 200 kSPS BiCMOS ADC | Analog Devices
MPN: AD977AAN ✗ اختتامِ زندگیAD977AAN جائزہ
An ADC is an interface IC that converts continuous analog voltages into digital codes for processing by a microcontroller, DSP, FPGA, or communications system. The AD977A belongs to the successive-approximation ADC hierarchy, using a comparator, internal DAC, and successive conversion stages to balance conversion speed, resolution, power consumption, and implementation complexity. It is designed for accurate digitization of moderately high-frequency signals rather than waveform capture at megahertz rates.
The AD977AAN provides 16-bit resolution, a 200 kSPS maximum throughput rate, and operation from a single 5 V supply. Maximum power dissipation is listed at 100 mW, while power-down operation reduces consumption when the converter is not sampling. Selectable unipolar and bipolar input ranges allow the same converter architecture to serve sensors, transducer outputs, and conditioned analog signals. An external reference and external clock options support flexible system timing and calibration.
Internally, the device uses a BiCMOS implementation that combines bipolar and CMOS circuitry. The AD977 part in the family supports 100 kSPS throughput, whereas the AD977A supports 200 kSPS. This distinction is important during replacement because the faster AD977A should not be treated as electrically identical to the 100 kSPS AD977 when acquisition timing or digital-interface timing is fixed by the host processor.
Typical uses include multichannel process-control instrumentation, programmable logic controllers, communications receivers, laboratory measurement equipment, and embedded data-acquisition systems. The 20-pin DIP format also supports prototyping and automated test systems where through-hole insertion and socketed assembly are preferred over fine-pitch surface-mount packages.
Designers should establish analog signal conditioning before the converter, use a clean reference source, and account for acquisition time when initiating each conversion. The input network, grounding, reference routing, and digital interface require careful layout to prevent noise or switching activity from degrading the 16-bit result. A parallel data interface also requires suitable bus timing and signal-integrity review at the connected processor.
This product page combines manufacturer specifications, package information, application guidance, a structured engineering comparison, and practical design notes. It is intended to help engineers confirm interface compatibility, evaluate acquisition timing, and determine whether the AD977AAN satisfies a system’s resolution, input-range, supply, and mechanical requirements.
کے لیے ڈراپ اِن متبادل AD977AAN — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں AD977AAN (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, Supply Voltage, Throughput Rate, Internal Reference, Architecture.
AD977AANZ
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →AD977ABN
✅ ڈراپ-اِنقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →AD977AAN زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Converter Type | Successive-approximation ADC |
| ریزولوشن | 16 bit |
| AD977A Throughput Rate | 200 kSPS |
| AD977 Throughput Rate | 100 kSPS |
| سپلائی وولٹیج | 5 V single supply |
| Maximum Supply Voltage | 5.25 V |
| Maximum Power Dissipation | 100 mW |
| Unipolar Input Range | 0 V to 5 V or 0 V to 4 V |
| Bipolar Input Range | -5 V to +5 V or -3.3 V to +3.3 V |
| Temperature Grade | Industrial |
| Maximum Operating Temperature | +85 °C |
| پیکیج | 20-pin through-hole DIP |
| Terminal Count | 20 |
| ماؤنٹنگ ٹائپ | Through-hole |
AD977AAN 20-pin through-hole dip پن کنفیگریشن گائیڈ
AD977AAN (20-pin through-hole dip پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں AD977AAN.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
AD977AAN کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Process Measurement, Communications Receiver, Data-Acquisition System, Laboratory Instrumentation, Programmable Logic Controller, Automated Test Equipment.
Industrial Process Measurement
The AD977AAN fits industrial process-control systems that must digitize slow or moderately varying sensor signals with 16-bit resolution. Its 200 kSPS throughput provides ample conversion margin for pressure, temperature, flow, and level transducer channels, while selectable 0–5 V, 0–4 V, ±5 V, and ±3.3 V inputs can simplify interface matching to conditioned transmitter outputs. The single 5 V supply simplifies system power distribution, and the listed 100 mW maximum power dissipation supports compact multi-channel measurement hardware. Use a front-end amplifier or filter when sensor outputs require attenuation, gain, isolation, or anti-alias filtering, and verify the converter’s complete sample-and-hold acquisition behavior before setting the channel update rate.
تجویز کردہ
Communications Receiver
The AD977AAN is appropriate for communications receiver front ends that require accurate conversion of conditioned intermediate-frequency or baseband signals at rates up to 200 kSPS. Its 16-bit resolution can preserve low-level modulation detail after suitable amplification, while the 200 kSPS conversion rate supports digital demodulation, filtering, and symbol-rate processing. The selectable bipolar inputs are useful when the receiver presents a centered analog waveform, although signal amplitude, common-mode voltage, and driver capability must remain within the selected operating configuration. Keep the analog input path short and controlled, provide a stable reference, and isolate converter switching from sensitive RF and baseband nodes to prevent degradation of receiver signal integrity.
تجویز کردہ
Data-Acquisition System
The AD977AAN serves as the acquisition converter in a compact laboratory or embedded data-acquisition system requiring 16-bit numerical resolution without the complexity of a very high-speed ADC. Its 200 kSPS maximum rate supports multi-channel analog monitoring when channels are sampled sequentially or through synchronized front ends. The 20-pin DIP package simplifies breadboard, socket, and automated-test implementations and is useful during system bring-up. Designers should account for acquisition time when calculating the effective per-channel sampling interval and should implement anti-alias filtering appropriate to the selected update rate. A low-noise reference and careful return-path design are essential because reference disturbance and ground bounce can affect conversion accuracy.
تجویز کردہ
Laboratory Instrumentation
The AD977AAN is well matched to laboratory instruments that digitize slow sensor, transducer, or calibration signals with high numerical resolution. A 16-bit converter can improve dynamic range and reduce quantization error relative to lower-resolution converters, while the 200 kSPS throughput supports responsive measurements without requiring a flash ADC. The DIP package is particularly convenient for prototype instruments and fixture-based service equipment. For accurate results, the analog input should be buffered, protected against overvoltage, and filtered before entering the converter. The reference should remain stable during each acquisition, and the instrument should avoid injecting large data-bus transitions close to sensitive input and reference nodes.
تجویز کردہ
Programmable Logic Controller
The AD977AAN can be used in a programmable logic controller or embedded industrial controller for analog supervisory channels, condition monitoring, and closed-loop process inputs. Its 16-bit resolution provides useful precision, and the 200 kSPS rate allows each conversion to complete well before typical PLC scan cycles require updated data. Single 5 V operation simplifies interface to modern control electronics, although logic-level compatibility must be checked against the host interface. Add input protection and conditioning for field wiring, isolate high-energy transients before the converter, and establish a defined startup sequence so the reference and analog inputs settle before the controller trusts the first conversion result.
تجویز کردہ
Automated Test Equipment
The AD977AAN is suited to automated test equipment that measures analog outputs, verifies converters, or captures low-frequency stimulus-response data. The 20-pin through-hole DIP package simplifies insertion into sockets and reduces sensitivity to the assembly complexity associated with fine-pitch devices. Its 16-bit resolution supports characterization of precision signals, and 200 kSPS provides sufficient timing margin for production-test cycle times. Fixture designers should minimize long analog traces, provide clean grounds, and separate digital test-control activity from the input network. Verify the settling time of the source under test, perform a zero-scale or full-scale calibration as appropriate, and account for converter acquisition time when calculating the required measurement interval.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا AD977AAN — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ |
|---|---|
| Package | 20-pin through-hole DIP |
| Brand | Analog Devices |
| Resolution | 16 bit |
| Throughput Rate | 200 kSPS |
| Supply | 5 V single supply |
| Unipolar Inputs | 0–5 V or 0–4 V |
| Bipolar Inputs | ±5 V or ±3.3 V |
| Maximum Power Dissipation | 100 mW |
| Power-Down Mode | Yes |
| Maximum Operating Temperature | +85 °C |
اہم امتیازی خصوصیات
- Doubled throughput within the related AD977 family (بمقابلہAD977)
- Higher numerical resolution for precision acquisition (بمقابلہAD977)
- Through-hole construction simplifies prototype integration (بمقابلہSurface-mount AD977A order variants)
ڈیزائن نوٹس
Route the analog input directly to the converter through a short, shielded path and place input filtering components close to the relevant pins. Keep digital data and control traces away from the input and reference nodes, and provide a low-impedance ground return for the converter and its front end. Breadboard or long-probe layouts can introduce pickup that is significant relative to a 16-bit converter, so use a controlled PCB or fixture when measuring low-level signals.
Decouple the single 5 V supply near the device and keep the return current out of sensitive analog-ground paths. Verify the reference arrangement and startup behavior in the manufacturer datasheet before applying power. Because the converter can dissipate up to 100 mW, provide adequate local copper and ventilation in dense instrumentation. Power-down mode can reduce consumption between measurements, but control-state transitions must not create unstable reference or input conditions.
Do not assume that the 100 kSPS AD977 and the 200 kSPS AD977AAN are interchangeable. Host sampling code, acquisition timing, filter cutoffs, and digital bus timing may depend on the specified conversion rate. Also verify the selected input range and external reference configuration rather than inferring them from the package. Calibration and measurement uncertainty should include reference accuracy, analog noise, and acquisition settling.
تعمیل کی معلومات
The available product summaries do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact AD977AAN ordering code.