AD9822JRS - 14-Bit 3-Channel CCD/CIS Signal Processor | Analog Devices
Артикул: AD9822JRS ⚠ Последняя закупкаAD9822JRS Обзор
A CCD/CIS signal processor is an interface IC that sits between an imaging sensor and the system digitizer. CCD outputs commonly contain large DC offsets, reset noise, fixed-pattern variations, and low-level video information. By performing correlated double sampling and programmable gain before conversion, the AD9822 reduces these unwanted components while preserving the image signal. Its three channels support color imaging systems in which red, green, and blue sensor outputs require consistent conditioning.
The principal features of the AD9822 include its complete three-channel signal path, 14-bit conversion resolution, programmable channel gain, and offset adjustment through a DAC. The shared ADC architecture reduces component count compared with three independent converters. A 5 V analog supply range also places the device in the supply domain commonly used by CCD output stages, although the clocking, reference, reset, and signal-routing requirements remain important system-level constraints.
Internally, each channel starts with an input clamp that establishes a controlled operating point for the sensor output. The correlated double sampler subtracts the sampled reset level from the subsequent signal sample, removing much of the reset-related baseline and noise. An offset DAC provides DC-level adjustment, while the PGA controls analog gain before the three conditioned channels are multiplexed into the high-performance 14-bit converter.
Typical applications include flatbed scanners, professional imaging equipment, color CCD cameras, document scanners, and other CCD-based imaging systems. The device is especially appropriate when three color channels must be sampled through a shared high-resolution converter. System designers must also provide suitable clocking, analog-input conditioning, reference and bypass capacitors, and PCB layouts that minimize digital-clock and analog-signal interference.
Layout is a central design consideration because CCD outputs can be small and sensitive to noise. Keep the analog input paths short, place decoupling capacitors close to the supply pins, and maintain controlled return paths beneath sensitive signals. Clock and digital-control traces should be kept away from the input and ADC sections where practical, because coupling from the multiplexed converter can create visible timing or fixed-pattern errors.
This product overview combines the manufacturer's functional description, lifecycle status, package information, electrical limits, and cross-reference findings with practical guidance for CCD/CIS signal-chain design. It also distinguishes the documented AD9822JRS from packaging and lifecycle considerations that must be checked before new production use.
Аналоги без доработки для AD9822JRS — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AD9822JRS (тот же форм-фактор и посадочное место) — отличается по Input Clamp, Package.
AD9822JRSZRL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AD9822JRS Максимальные параметры и электрические характеристики
| Product Type | Complete 14-bit CCD/CIS signal processor |
| ADC Resolution | 14 bit |
| Channel Architecture | 3 channels |
| Input Signal Type | Trilinear color CCD array output |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Диапазон рабочих температур | 0 °C to 70 °C |
| Process Technology | CMOS |
| Корпус | 28-lead SSOP |
| Terminal Count | 28 terminals |
| Тип монтажа | Surface mount |
| Per-Channel Functions | Input clamp, correlated double sampler, offset DAC, and programmable gain amplifier |
| Converter Architecture | Multiplexed 3-channel 14-bit ADC |
| Input Clamp | Included in each of the 3 channels |
| Offset Adjustment | Per-channel DAC |
Руководство по цоколевке AD9822JRS в корпусе 28-lead ssop
Цоколевка для AD9822JRS (корпус 28-lead ssop). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для AD9822JRS.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
AD9822JRS подходит для 6 применениеs: Flatbed Color CCD Scanner, Professional Color Imaging System, Document Scanner Front End, Color CCD Camera Electronics, Industrial Optical Inspection, Trilinear CCD Readout Electronics.
Flatbed Color CCD Scanner
The AD9822JRS fits a trilinear CCD scanner because it conditions three color channels in parallel and converts the selected output with a shared 14-bit ADC. Each channel performs input clamping, correlated double sampling, offset-DAC adjustment, and programmable gain before multiplexing. This integration reduces the discrete analog-chain count in a scanner front end while preserving separate color-channel processing. The 4.75 V to 5.25 V supply range suits a 5 V analog front end, although the 0 °C to 70 °C rating must be checked against enclosure temperature. Layout should keep sensor inputs short and isolate converter clocks from the clamped and sampled CCD outputs.
Рекомендуется
Professional Color Imaging System
The AD9822JRS is appropriate for professional imaging equipment that receives separate red, green, and blue outputs from a trilinear CCD. Its three matched conditioning paths allow offset and gain to be managed per channel before the common 14-bit converter, helping preserve color consistency across scan lines. The integrated clamp, correlated double sampler, offset DAC, and PGA reduce external analog circuitry. Because the device supports a 0 °C to 70 °C operating range, system designers should verify internal temperatures rather than assume ambient specifications. Sensitive CCD outputs and the multiplexed ADC section also require careful grounding and clock-routing discipline.
Рекомендуется
Document Scanner Front End
In a document scanner, the AD9822JRS can condition the three outputs of a trilinear color CCD and provide a compact 14-bit digitization path. Correlated double sampling is useful when sensor reset offsets would otherwise occupy a substantial portion of the required converter range, while per-channel offset DAC and PGA controls support calibration of nonuniform channel levels. The SSOP-28 package supports surface-mount assembly but requires adequate routing discipline around high-impedance sensor inputs. The 4.75 V to 5.25 V supply range fits a 5 V analog subsystem. Current lifecycle status must be incorporated into any new scanner platform because the manufacturer marks the family LAST TIME BUY.
Рекомендуется
Color CCD Camera Electronics
The AD9822JRS can serve as the analog front end of a color CCD camera when the sensor produces three independently conditioned color outputs. Its per-channel clamp and PGA establish suitable signal ranges, the correlated double samplers suppress reset-related components, and the offset DACs compensate channel DC offsets. A shared multiplexed 14-bit ADC then supplies the camera electronics with digitized image information. Designers should synchronize all timing controls to the CCD readout sequence and verify the exact ADI application timing. The 0 °C to 70 °C operating range may require enclosure temperature control or a different device selection for harsher environments.
Рекомендуется
Industrial Optical Inspection
The AD9822JRS can serve in optical inspection equipment where a line-scan or area CCD provides three color channels requiring repeatable sampling and gain control. Its correlated double sampling reduces reset-related baseline variation, while independent offset DAC and PGA controls allow channel-specific calibration. The common 14-bit ADC supports consistent digital word length across the three inputs. For industrial deployments, verify the device's 0 °C to 70 °C range against enclosure conditions and ensure the analog supply remains within 4.75 V to 5.25 V. PCB design should use short sensor routes, solid ground returns, and controlled clock-to-analog coupling.
Рекомендуется
Trilinear CCD Readout Electronics
The AD9822JRS is designed specifically for trilinear CCD readout arrangements in which three sensor outputs are processed as parallel color channels. Each channel's clamp, correlated double sampler, offset DAC, and PGA operate before a three-input multiplexer and 14-bit ADC, allowing the imaging system to retain per-channel calibration while sharing the converter. This arrangement is useful in compact imaging electronics where a three-converter architecture would consume additional board area. Correct CCD clock phasing, reset timing, and converter multiplexing timing are essential to image quality. The 28-lead SSOP package also requires careful pin assignment and stable analog return paths in multilayer PCB layouts.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AD9822JRS — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AD9822JRSZRL |
|---|---|---|
| Package | SSOP-28 | SSOP-28 |
| Brand | Analog Devices | Analog Devices |
| ADC Resolution | 14 bit | 14 bit |
| Channel Count | 3 channels | 3 channels |
| Per-Channel Signal Path | Input clamp, correlated double sampler, offset DAC, and PGA | Input clamp, correlated double sampler, offset DAC, and PGA |
| Pin Compatibility | 28-pin SSOP-28 footprint | Pin-compatible; no PCB modification required |
| Replacement Qualification | Original AD9822JRS ordering option | Documented complete replacement |
Ключевые отличия
- Complete three-channel CCD conditioning path (против AD9822JRSZRL)
- No PCB modification required for replacement (против AD9822JRSZRL)
- Purpose-built CCD/CIS integration (против AD9822JRSZRL)
Заметки по проектированию
Route each CCD output directly to the corresponding AD9822 input with a short, continuous path. These sensor signals are small and can pick up noise from digital clocks, the multiplexed ADC path, and switching power circuitry. Use a continuous ground reference beneath the analog section, avoid vias in sensitive input routes, and place supply bypass capacitors close to the relevant device pins using the manufacturer's recommended values.
Keep clock and digital-control traces away from the clamp, CDS, offset-DAC, and PGA input nodes. Maintain a predictable relationship between CCD readout timing and channel multiplexing so switching energy does not appear on the retained sample. A solid analog ground plane and short returns for supply and reference connections reduce code-dependent offsets. Validate the final layout by observing multiple CCD channels and checking that unused-channel crosstalk remains within the system requirement.
Do not treat AD9822JRS and AD9822JRSZRL as interchangeable solely because their packages match. Verify the exact ordering suffix, temperature grade, lifecycle status, date-code requirements, and assembly form against the Analog Devices ordering information. The original family is marked LAST TIME BUY, so a current quotation and inventory confirmation are essential before committing a production build to either ordering option.
Информация о соответствии
The manufacturer identifies AD9822 as LAST TIME BUY. The AD9822JRSZRL suffix indicates a lead-free ordering option, but formal RoHS, REACH, halogen-free, and conflict-minerals declarations were not stated in the available manufacturer extracts.