最后一次采购通知: AD9822JRS 即将停产。最后下单日期: 联系我们. 查看可用的替代料号 →
Analog Devices

AD9822JRS - 14-Bit 3-Channel CCD/CIS Signal Processor | Analog Devices

料号: AD9822JRS ⚠ 最后一次采购
4.75 V to 5.25 V Vdss 28-lead SSOP Package
最小起订量: 1 |

AD9822JRS 概述

The Analog Devices AD9822JRS is a complete 14-bit CCD/CIS analog signal processor with a three-channel architecture for conditioning outputs from trilinear color CCD arrays. It operates from a 4.75 V to 5.25 V supply, supports a 0 °C to 70 °C temperature range, and is packaged as a 28-lead SSOP. Each signal path combines input clamping, correlated double sampling, an offset DAC, and a programmable gain amplifier before multiplexing into a 14-bit ADC.

A CCD/CIS signal processor is an interface IC that sits between an imaging sensor and the system digitizer. CCD outputs commonly contain large DC offsets, reset noise, fixed-pattern variations, and low-level video information. By performing correlated double sampling and programmable gain before conversion, the AD9822 reduces these unwanted components while preserving the image signal. Its three channels support color imaging systems in which red, green, and blue sensor outputs require consistent conditioning.

The principal features of the AD9822 include its complete three-channel signal path, 14-bit conversion resolution, programmable channel gain, and offset adjustment through a DAC. The shared ADC architecture reduces component count compared with three independent converters. A 5 V analog supply range also places the device in the supply domain commonly used by CCD output stages, although the clocking, reference, reset, and signal-routing requirements remain important system-level constraints.

Internally, each channel starts with an input clamp that establishes a controlled operating point for the sensor output. The correlated double sampler subtracts the sampled reset level from the subsequent signal sample, removing much of the reset-related baseline and noise. An offset DAC provides DC-level adjustment, while the PGA controls analog gain before the three conditioned channels are multiplexed into the high-performance 14-bit converter.

Typical applications include flatbed scanners, professional imaging equipment, color CCD cameras, document scanners, and other CCD-based imaging systems. The device is especially appropriate when three color channels must be sampled through a shared high-resolution converter. System designers must also provide suitable clocking, analog-input conditioning, reference and bypass capacitors, and PCB layouts that minimize digital-clock and analog-signal interference.

Layout is a central design consideration because CCD outputs can be small and sensitive to noise. Keep the analog input paths short, place decoupling capacitors close to the supply pins, and maintain controlled return paths beneath sensitive signals. Clock and digital-control traces should be kept away from the input and ADC sections where practical, because coupling from the multiplexed converter can create visible timing or fixed-pattern errors.

This product overview combines the manufacturer's functional description, lifecycle status, package information, electrical limits, and cross-reference findings with practical guidance for CCD/CIS signal-chain design. It also distinguishes the documented AD9822JRS from packaging and lifecycle considerations that must be checked before new production use.

直接替换替代料: AD9822JRS ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: AD9822JRS (相同外形与封装尺寸) ——差异在于 Input Clamp, Package.

Analog Devices
Input Clamp: Integrated input clamp circuitry
Package: 28-SSOP
对比 AD9822JRS →

AD9822JRSZRL

✅ 直接替换
📦 SSOP-28
Same 14-bit, 3-channel CCD/CIS signal processing and SSOP-28 pin/package arrangement; ordering suffix differs by 0 percentage points in key ratings

📋 参考替代料(不在目录中)

AD9822JRS 最大额定值与电气特性

Product Type Complete 14-bit CCD/CIS signal processor
ADC Resolution 14 bit
Channel Architecture 3 channels
Input Signal Type Trilinear color CCD array output
Supply Voltage Range 4.75 V to 5.25 V
工作温度范围 0 °C to 70 °C
Process Technology CMOS
封装 28-lead SSOP
Terminal Count 28 terminals
安装类型 Surface mount
Per-Channel Functions Input clamp, correlated double sampler, offset DAC, and programmable gain amplifier
Converter Architecture Multiplexed 3-channel 14-bit ADC
Input Clamp Included in each of the 3 channels
Offset Adjustment Per-channel DAC

AD9822JRS 28-lead ssop 引脚配置指南

AD9822JRS(28-lead ssop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

AD9822JRS 的 28-lead ssop 封装引脚图

暂无详细引脚数据: AD9822JRS.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AD9822JRS 适用于 6 应用s: Flatbed Color CCD Scanner, Professional Color Imaging System, Document Scanner Front End, Color CCD Camera Electronics, Industrial Optical Inspection, Trilinear CCD Readout Electronics.

🖥️

Flatbed Color CCD Scanner

The AD9822JRS fits a trilinear CCD scanner because it conditions three color channels in parallel and converts the selected output with a shared 14-bit ADC. Each channel performs input clamping, correlated double sampling, offset-DAC adjustment, and programmable gain before multiplexing. This integration reduces the discrete analog-chain count in a scanner front end while preserving separate color-channel processing. The 4.75 V to 5.25 V supply range suits a 5 V analog front end, although the 0 °C to 70 °C rating must be checked against enclosure temperature. Layout should keep sensor inputs short and isolate converter clocks from the clamped and sampled CCD outputs.

📺

Professional Color Imaging System

The AD9822JRS is appropriate for professional imaging equipment that receives separate red, green, and blue outputs from a trilinear CCD. Its three matched conditioning paths allow offset and gain to be managed per channel before the common 14-bit converter, helping preserve color consistency across scan lines. The integrated clamp, correlated double sampler, offset DAC, and PGA reduce external analog circuitry. Because the device supports a 0 °C to 70 °C operating range, system designers should verify internal temperatures rather than assume ambient specifications. Sensitive CCD outputs and the multiplexed ADC section also require careful grounding and clock-routing discipline.

🖥️

Document Scanner Front End

In a document scanner, the AD9822JRS can condition the three outputs of a trilinear color CCD and provide a compact 14-bit digitization path. Correlated double sampling is useful when sensor reset offsets would otherwise occupy a substantial portion of the required converter range, while per-channel offset DAC and PGA controls support calibration of nonuniform channel levels. The SSOP-28 package supports surface-mount assembly but requires adequate routing discipline around high-impedance sensor inputs. The 4.75 V to 5.25 V supply range fits a 5 V analog subsystem. Current lifecycle status must be incorporated into any new scanner platform because the manufacturer marks the family LAST TIME BUY.

🎥

Color CCD Camera Electronics

The AD9822JRS can serve as the analog front end of a color CCD camera when the sensor produces three independently conditioned color outputs. Its per-channel clamp and PGA establish suitable signal ranges, the correlated double samplers suppress reset-related components, and the offset DACs compensate channel DC offsets. A shared multiplexed 14-bit ADC then supplies the camera electronics with digitized image information. Designers should synchronize all timing controls to the CCD readout sequence and verify the exact ADI application timing. The 0 °C to 70 °C operating range may require enclosure temperature control or a different device selection for harsher environments.

🏭

Industrial Optical Inspection

The AD9822JRS can serve in optical inspection equipment where a line-scan or area CCD provides three color channels requiring repeatable sampling and gain control. Its correlated double sampling reduces reset-related baseline variation, while independent offset DAC and PGA controls allow channel-specific calibration. The common 14-bit ADC supports consistent digital word length across the three inputs. For industrial deployments, verify the device's 0 °C to 70 °C range against enclosure conditions and ensure the analog supply remains within 4.75 V to 5.25 V. PCB design should use short sensor routes, solid ground returns, and controlled clock-to-analog coupling.

📷

Trilinear CCD Readout Electronics

The AD9822JRS is designed specifically for trilinear CCD readout arrangements in which three sensor outputs are processed as parallel color channels. Each channel's clamp, correlated double sampler, offset DAC, and PGA operate before a three-input multiplexer and 14-bit ADC, allowing the imaging system to retain per-channel calibration while sharing the converter. This arrangement is useful in compact imaging electronics where a three-converter architecture would consume additional board area. Correct CCD clock phasing, reset timing, and converter multiplexing timing are essential to image quality. The 28-lead SSOP package also requires careful pin assignment and stable analog return paths in multilayer PCB layouts.

推荐产品汇总

AD9822JRS Analog Devices 用于: Flatbed Color CCD Scanner, Professional Color Imaging System, Document Scanner Front End, Color CCD Camera Electronics, Industrial Optical Inspection, Trilinear CCD Readout Electronics AD9822JRSZRL Lead-free ordering alternative for the same signal path 用于: Flatbed Color CCD Scanner, Professional Color Imaging System, Document Scanner Front End, Color CCD Camera Electronics, Industrial Optical Inspection, Trilinear CCD Readout Electronics
What is the AD9822JRS used for?
The AD9822JRS is a complete 14-bit analog signal processor for three-channel CCD imaging systems. According to the Analog Devices product page, each channel includes an input clamp, correlated double sampler, offset DAC, and programmable gain amplifier, with all three conditioned outputs multiplexed into a high-performance 14-bit ADC. It is intended for trilinear color CCD arrays and equipment such as scanners and imaging systems.
Where can I download the AD9822JRS datasheet PDF?
The official AD9822JRS datasheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD9822.pdf. The manufacturer data sheet is Rev. B and describes the CCD/CIS signal path, electrical characteristics, applications, and pin information. The Analog Devices product page also provides access to the data sheet, product-selection information, documentation, software, and related resources.
What is the operating voltage of AD9822JRS?
The AD9822JRS operates from 4.75 V to 5.25 V, giving it a nominal 5 V supply range with 250 mV total variation around 5 V. This supply operates the complete analog signal processor, including its three conditioned input channels and multiplexed 14-bit ADC. Power-supply bypass capacitors should be placed close to the device's supply pins to preserve low-impedance operation.
How many channels and bits does AD9822JRS have?
The AD9822JRS contains three independent analog conditioning channels and a shared 14-bit ADC. According to the Analog Devices product description, each channel contains an input clamp, correlated double sampler, offset DAC, and programmable gain amplifier. Multiplexing the three conditioned outputs into one 14-bit converter reduces the external converter count required for a typical trilinear color CCD signal chain.
What is the AD9822JRS pinout?
The AD9822JRS is a 28-lead SSOP device, but the complete numbered pin-name table must be taken from the Analog Devices AD9822 data sheet rather than inferred from the package drawing. Use the manufacturer's Rev. B PDF to map supply, analog inputs, clocks, control signals, digital outputs, and ground pins before laying out or modifying a PCB. The data-sheet pin-description and package-drawing tables provide the authoritative numbering.
Is AD9822JRS suitable for a color CCD scanner?
Yes, the AD9822JRS is specifically suited to three-channel trilinear color CCD imaging. Its three parallel signal paths provide input clamping, correlated double sampling, offset-DAC adjustment, and programmable gain before the signals reach the 14-bit ADC. This integration is useful in flatbed scanners and similar systems where separate conditioning channels must operate consistently across repeated line scans.
What is the difference between AD9822JRS and AD9822JRSZRL?
The documented cross-reference identifies AD9822JRSZRL as an SSOP-28 device with matching performance characteristics, terminals, and package, making it a direct replacement without PCB modification. The suffix distinction primarily identifies the exact ordering and lead-free packaging configuration. Before substitution, engineers should verify the ordering table, temperature grade, lifecycle status, and available quantity for the intended production cycle.
Can AD9822JRSZRL replace AD9822JRS?
Yes, AD9822JRSZRL is documented as a complete replacement for AD9822JRS because both use SSOP-28 packaging, their terminals and packages are consistent, and their main functional characteristics match. The AD9822JRS is marked LAST TIME BUY, so the ZRL ordering option may be relevant to continuity planning. Confirm the specific suffix, temperature range, and production requirements against the Analog Devices ordering information.
What is the best drop-in replacement for AD9822JRS?
AD9822JRSZRL is the verified drop-in replacement for AD9822JRS. The available cross-reference explicitly describes it as a complete replacement with an SSOP-28 package, consistent terminals, and matching main performance and functional characteristics, so no PCB changes are required. Because the original part is in LAST TIME BUY status, engineers should obtain a current quotation and confirm exact suffix requirements through the Request a Quote form.
When should I choose AD9822JRS over another CCD signal processor?
Choose AD9822JRS when the design requires an integrated three-channel CCD conditioning path and a multiplexed 14-bit converter in an SSOP-28 package. Its input clamp, correlated double sampler, offset DAC, and programmable gain functions reduce the number of discrete conditioning stages. It is less attractive for new designs when LAST TIME BUY availability or the 0 °C to 70 °C operating range conflicts with the product plan.
Is AD9822JRS the same as AD9822JRSZRL?
AD9822JRS and AD9822JRSZRL are electrically and functionally equivalent alternatives with the same documented SSOP-28 package and pin configuration. The cross-reference states that replacement does not require modification of an existing board. They are nevertheless separate orderable suffixes, so the commercial lifecycle, availability, date codes, and exact ordering code should be checked before approving either part for production.
Where can I buy AD9822JRS and what is its price?
Use the Request a Quote form on this page to request current AD9822JRS pricing, stock confirmation, minimum order quantity, and lead time. The manufacturer lists AD9822 as LAST TIME BUY, so availability may be constrained and should not be inferred from general distributor indexes. No fixed commercial figure should be relied upon without a current quotation tied to the exact AD9822JRS suffix.
What is the lead time for AD9822JRS?
The current lead time for AD9822JRS should be requested through the Request a Quote form on this page. Because Analog Devices marks the product LAST TIME BUY, lead time and lot availability depend on remaining factory and distribution inventory rather than a normal new-design production cycle. A quotation should state the exact suffix, package form, quantity, and required ship date.
Is AD9822JRS in stock?
AD9822JRS stock should be confirmed through the Request a Quote form on this page because the manufacturer classifies the AD9822 family as LAST TIME BUY. An indexed distributor listing does not by itself establish current stock or a guaranteed allocation. The quote request should specify the required quantity, acceptable date code, packaging form, and delivery location.
What are the key specifications of AD9822JRS that engineers should know?
The key AD9822JRS specifications are a 14-bit ADC, three CCD conditioning channels, a 4.75 V to 5.25 V supply range, and a 0 °C to 70 °C operating range. Each channel includes an input clamp, correlated double sampler, offset DAC, and PGA, and the device uses a 28-lead SSOP package. Analog Devices identifies the product as LAST TIME BUY.

工程参考数据: AD9822JRS ——对比、设计指导和合规信息。

选型指南

Choose AD9822JRS when maintaining an existing SSOP-28 CCD imaging design and a final procurement of the original ordering option is feasible. It provides three CCD conditioning channels, correlated double sampling, per-channel offset and gain controls, and a shared 14-bit ADC in the required package. Choose AD9822JRSZRL when supply continuity or lead-free ordering is preferable because the documented cross-reference identifies it as a complete, pin-compatible replacement without PCB modification. Confirm the exact ordering suffix, temperature grade, production quantity, and lifecycle commitment before release. For a new design requiring wider temperature limits, higher speed, more channels, or a currently active product family, the AD9822's LAST TIME BUY status should trigger a broader architecture review rather than an assumption that a drop-in successor exists.

与替代料对比

参数 本产品 AD9822JRSZRL
Package SSOP-28 SSOP-28
Brand Analog Devices Analog Devices
ADC Resolution 14 bit 14 bit
Channel Count 3 channels 3 channels
Per-Channel Signal Path Input clamp, correlated double sampler, offset DAC, and PGA Input clamp, correlated double sampler, offset DAC, and PGA
Pin Compatibility 28-pin SSOP-28 footprint Pin-compatible; no PCB modification required
Replacement Qualification Original AD9822JRS ordering option Documented complete replacement

关键差异点

  • Complete three-channel CCD conditioning path (对比 AD9822JRSZRL)
  • No PCB modification required for replacement (对比 AD9822JRSZRL)
  • Purpose-built CCD/CIS integration (对比 AD9822JRSZRL)

设计说明

Route each CCD output directly to the corresponding AD9822 input with a short, continuous path. These sensor signals are small and can pick up noise from digital clocks, the multiplexed ADC path, and switching power circuitry. Use a continuous ground reference beneath the analog section, avoid vias in sensitive input routes, and place supply bypass capacitors close to the relevant device pins using the manufacturer's recommended values.

Keep clock and digital-control traces away from the clamp, CDS, offset-DAC, and PGA input nodes. Maintain a predictable relationship between CCD readout timing and channel multiplexing so switching energy does not appear on the retained sample. A solid analog ground plane and short returns for supply and reference connections reduce code-dependent offsets. Validate the final layout by observing multiple CCD channels and checking that unused-channel crosstalk remains within the system requirement.

Do not treat AD9822JRS and AD9822JRSZRL as interchangeable solely because their packages match. Verify the exact ordering suffix, temperature grade, lifecycle status, date-code requirements, and assembly form against the Analog Devices ordering information. The original family is marked LAST TIME BUY, so a current quotation and inventory confirmation are essential before committing a production build to either ordering option.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The manufacturer identifies AD9822 as LAST TIME BUY. The AD9822JRSZRL suffix indicates a lead-free ordering option, but formal RoHS, REACH, halogen-free, and conflict-minerals declarations were not stated in the available manufacturer extracts.

数据核验日期: 2026-11-15 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

AD9822JRS datasheet AD9822JRS pinout AD9822JRS datasheet pdf AD9822JRS specifications AD9822JRS equivalent AD9822JRS replacement AD9822JRS price AD9822JRS stock Analog Devices AD9822JRS AD9822JRS SSOP-28 footprint AD9822JRS CCD signal processor AD9822JRS vs AD9822JRSZRL

相关元器件 & 术语

Analog Devices AD9822 AD9822JRS AD9822JRSZRL AD9822JRZ AD9822JR 14-bit ADC CCD signal processor CIS signal processor correlated double sampler programmable gain amplifier offset DAC input clamp trilinear color CCD SSOP-28 surface mount CMOS 5 V analog supply channel multiplexing image sensor interface flatbed scanner LAST TIME BUY RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情