Analog Devices

ADF4112BCPZ-RL7 - 3 GHz Integer-N PLL | Analog Devices

Артикул: ADF4112BCPZ-RL7 ✓ Активен
2.7 V to 5.5 V Vdss Programmable Id 20-WFQFN exposed-pad CSP Package 3 GHz Speed
MOQ: 1 |

ADF4112BCPZ-RL7 Обзор

The Analog Devices ADF4112BCPZ-RL7 is a single-channel, integer-N radio-frequency phase-locked loop frequency synthesizer with a maximum operating frequency of 3 GHz, a 4 GHz RF bandwidth, and a 20-lead WFQFN exposed-pad CSP package. It combines a programmable dual-modulus prescaler, programmable charge-pump current, a programmable reference divider, and integer A and B counters for local-oscillator generation in wireless receivers and transmitters.

A frequency synthesizer is a clock-and-timing IC that locks an output oscillator to a stable reference frequency. In the ADF4110 family hierarchy, the phase-frequency detector compares the divided reference with the divided feedback signal, while the charge pump converts phase and frequency error into a control voltage for an external voltage-controlled oscillator. This PLL is therefore an integer-N RF synthesizer rather than a fixed-frequency clock generator or a direct RF mixer.

Key features include a maximum frequency of 3 GHz, RF bandwidth to 4 GHz, a 2.7 V to 5.5 V supply range, and selectable 4/5 and 8/9 prescaler ratios. The 6-bit A counter and 13-bit B counter establish the programmable integer-N division ratio. Programmable charge-pump currents support adjustment of loop current, while the reference divider permits division of the external reference signal.

The ADF4110 family architecture uses a low-noise digital phase-frequency detector, a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus P/P+1 prescaler. The synthesizer produces a tuning voltage through the charge-pump output, so an external loop filter, tank circuit, and VCO are normally required. The separate supply or voltage arrangement should follow the pin-description and application-circuit tables in the manufacturer datasheet.

Typical applications include wireless receiver and transmitter local oscillators, RF up-conversion and down-conversion stages, wireless communication equipment, and test equipment requiring programmable RF synthesis. The 3 GHz ceiling is appropriate for many conventional RF bands, while the 4 GHz RF bandwidth supports higher operating conditions described by Analog Devices. Designers must still verify the VCO range, divider path, reference ratio, and lock-range requirements for the intended channel plan.

The critical design consideration is loop behavior. Prescaler choice, charge-pump current, reference-divider ratio, filter resistance and capacitance, and VCO tuning range determine lock time, phase noise, reference spurs, and maximum achievable output frequency. Use the manufacturer application information to select the prescaler, filter components, and external VCO before treating the ADF4112BCPZ-RL7 as a complete frequency-generation solution.

This product page combines the ADF4112 technical specifications, package and ordering information, pin-compatible family candidates, comparison parameters, and practical RF layout guidance into one engineering reference. It also highlights where external RF and passive components are required, helping designers distinguish the synthesizer IC from a standalone oscillator or complete RF signal chain.

Аналоги без доработки для ADF4112BCPZ-RL7 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ADF4112BCPZ-RL7 (тот же форм-фактор и посадочное место) — отличается по Package, Product Type.

Analog Devices
Package: 20-lead LFCSP with exposed pad
Product Type: Integer-N RF PLL frequency synthesizer
Сравнить с ADF4112BCPZ-RL7 →
Analog Devices
Package: 20-lead LFCSP with exposed pad
Product Type: Single integer-N RF PLL frequency synthesizer
Сравнить с ADF4112BCPZ-RL7 →

ADF4113BCPZ

✅ Прямая замена
Analog Devices
📦 20-WFQFN Exposed Pad, CSP
Single integer-N RF PLL frequency synthesizer · 4 GHz · 5 MHz · 165 MHz · Integer-N · 1 · 6 bits · 13 bits

Уточнить цену

Открыть даташит →

ADF4114BCPZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 20-WFQFN Exposed Pad, CSP
Same-family integer-N PLL with a different maximum operating-frequency rating from the 3 GHz ADF4112BCPZ-RL7

📋 Справочный аналог (нет в каталоге)

ADF4117BCPZ

✅ Прямая замена ⚠️ Характеристики не проверены
📦 20-WFQFN Exposed Pad, CSP
Lower maximum synthesis frequency than the 3 GHz ADF4112BCPZ-RL7, limiting its use on higher-frequency channels

📋 Справочный аналог (нет в каталоге)

ADF4112BCPZ-RL7 Характеристики

Device Type Single, integer-N RF PLL frequency synthesizer
Maximum Synthesizer Frequency 3 GHz
RF Bandwidth 4 GHz
Number of Synthesizers 1
Supply Voltage Range 2.7 V to 5.5 V
Диапазон рабочих температур -40 °C to +85 °C
Prescaler Ratios 4/5 or 8/9
A Counter Width 6 bit
B Counter Width 13 bit
Reference Divider Programmable
Charge-Pump Current Programmable
Phase-Frequency Detector Low-noise digital PFD
Корпус 20-WFQFN exposed-pad CSP
Тип монтажа Surface mount
Manufacturer Lifecycle Status Production

Руководство по цоколевке ADF4112BCPZ-RL7 в корпусе 20-wfqfn exposed-pad csp

Цоколевка для ADF4112BCPZ-RL7 (корпус 20-wfqfn exposed-pad csp). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 20-wfqfn exposed-pad csp для ADF4112BCPZ-RL7

Нет подробных данных о распиновке для ADF4112BCPZ-RL7.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ADF4112BCPZ-RL7 подходит для 6 применениеs: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, RF Down-Conversion, Programmable RF Test Equipment, Industrial RF Monitoring, RF Communication Module.

🌐

Wireless Receiver Local Oscillator

The ADF4112BCPZ-RL7 is appropriate for a programmable wireless receiver local oscillator when the required channel is within its 3 GHz maximum synthesis frequency. The 4/5 or 8/9 prescaler, 6-bit A counter, and 13-bit B counter establish the integer-N division ratio, while the reference divider adapts the incoming reference to the channel plan. A suitable external VCO and passive loop filter remain necessary. The design should be checked for lock range across temperature, reference spur suppression, phase noise, and the required settling time after a channel change.

🌐

Wireless Transmitter Up-Conversion

In a wireless transmitter up-conversion chain, the ADF4112BCPZ-RL7 can generate the programmable local-oscillator signal used by an RF mixer. Its 3 GHz maximum synthesis frequency covers many conventional RF operating bands, while the selectable prescaler supports flexible integer-N ratios. Engineers must choose the external VCO tuning range to cover the complete channel plan and calculate the loop filter around the selected charge-pump setting. The resulting design should then be evaluated for phase noise, unwanted reference spurs, output-power stability, and lock behavior during rapid frequency changes.

📡

RF Down-Conversion

The ADF4112BCPZ-RL7 can supply the local-oscillator signal used in an RF down-conversion stage for wireless equipment. Programmable reference division and integer-N counters allow channel frequencies to be derived from one reference source, reducing the need for multiple oscillators. Because the device is a synthesizer rather than a complete VCO, the external VCO must overlap the required local-oscillator range. Validate mixer drive requirements, harmonic content, phase-noise contribution, spur levels, and synthesizer settling time as a combined signal-chain budget.

🖥️

Programmable RF Test Equipment

The ADF4112BCPZ-RL7 is useful in programmable RF test equipment requiring a local oscillator below 3 GHz. Its integer-N architecture allows one reference source to produce multiple programmable frequencies, simplifying RF channel simulation and receiver-stimulus systems. The engineer should select a reference frequency and divider ratio that supports every required test channel while maintaining integer division. External loop-filter and VCO design quality will determine settling time and spectral purity, so the final instrument specification should be verified against phase-noise, spurious-signal, and amplitude-accuracy requirements.

🏭

Industrial RF Monitoring

For industrial RF monitoring equipment, the ADF4112BCPZ-RL7 can generate a programmable oscillator for sensing or communication front ends operating within the 3 GHz limit. Its surface-mount 20-WFQFN exposed-pad package supports compact instrument designs, while the integer-N architecture provides repeatable channel selection from a stable reference. Industrial enclosure temperature changes may shift the external VCO and loop characteristics, so the design should include sufficient tuning margin. Validate conducted and radiated emissions as well as lock performance across the full industrial temperature range.

🧩

RF Communication Module

The ADF4112BCPZ-RL7 can implement a compact programmable RF communication local oscillator when the carrier frequency and internal reference arrangement meet its synthesizer limits. Its 2.7 V to 5.5 V supply range permits integration with low-voltage RF circuitry, while the programmable prescaler and counters support multiple frequency plans. The external VCO and loop filter should be placed to minimize RF coupling and reference noise. Confirm conducted emissions, output-buffer isolation, temperature drift, and frequency accuracy before using the oscillator in a compact communications module.

What is the ADF4112BCPZ-RL7?
The ADF4112BCPZ-RL7 is a single-channel, integer-N RF phase-locked-loop frequency synthesizer from Analog Devices. According to the Analog Devices ADF4112 datasheet, it supports synthesis to 3 GHz, has a 4 GHz RF bandwidth, uses programmable 4/5 or 8/9 prescaling, and is packaged in a 20-WFQFN exposed-pad CSP for RF receiver and transmitter local-oscillator designs.
What is the maximum output frequency of ADF4112BCPZ-RL7?
The ADF4112BCPZ-RL7 supports a maximum synthesizer frequency of 3 GHz and an RF bandwidth of 4 GHz, as stated by Analog Devices. The maximum usable output must still fall within the tuning range of the external VCO and the selected prescaler path. Designers should therefore verify the complete VCO, loop-filter, and prescaler configuration against the intended RF channel plan.
Where can I download the ADF4112BCPZ-RL7 datasheet PDF?
The official ADF4112 datasheet and supporting documents are available from the Analog Devices product page at https://www.analog.com/en/products/adf4112.html. Select the Documents and Data Sheet resources for the current manufacturer PDF, which contains the complete pin-description table, electrical characteristics, register information, and recommended application circuits.
Where can I find the ADF4112BCPZ-RL7 pinout?
Use the pin-description table in the official Analog Devices ADF4112 datasheet to locate every connection on the 20-WFQFN exposed-pad package. The exposed thermal pad is a dedicated package connection rather than an optional PCB feature and should be connected according to the manufacturer layout guidance. The pinout diagram is not reproduced on this page because individual pin names were not available for transcription.
Is ADF4112BCPZ-RL7 suitable for wireless receiver and transmitter local oscillators?
Yes, the ADF4112BCPZ-RL7 is designed for programmable integer-N local oscillators in wireless receivers and transmitters. Analog Devices identifies the ADF4110 family for RF up-conversion and down-conversion stages. Its 3 GHz maximum synthesis frequency, programmable prescaler, reference divider, charge pump, and integer counters support configurable RF channel generation when paired with a suitable external VCO and loop filter.
ADF4112BCPZ-RL7 vs ADF4113BCPZ: which is better for my RF design?
ADF4113BCPZ is the stronger candidate when a design requires synthesis above the ADF4112BCPZ-RL7's 3 GHz maximum, while ADF4112BCPZ-RL7 is preferable when its 3 GHz ceiling satisfies the channel plan. Both are members of the Analog Devices integer-N PLL family and use related counter, prescaler, and charge-pump architectures. Confirm frequency range, register compatibility, pin functions, and VCO requirements before substitution.
What is the difference between ADF4112 and ADF4113 frequency synthesizers?
The principal functional difference is the operating-frequency range: ADF4112BCPZ-RL7 synthesizes to 3 GHz, whereas the ADF4113 family extends higher-frequency operation. Their related integer-N architectures share programmable prescaling, reference division, A/B counters, and charge-pump control. Because RF bandwidth, maximum channel rate, pin functions, and register details can differ, the two devices are not automatically interchangeable in every design.
When should I choose ADF4112BCPZ-RL7 over ADF4113BCPZ?
Choose ADF4112BCPZ-RL7 when every required local-oscillator frequency is at or below 3 GHz and the design does not require ADF4113-specific capabilities. Its 20-WFQFN exposed-pad package is attractive for compact RF modules, and its integer-N architecture supports programmable channel spacing. Choose ADF4113BCPZ only when its higher operating range or other device-specific functions provide a necessary design benefit.
Is ADF4112BCPZ-RL7 suitable for a 2.4 GHz RF application?
The ADF4112BCPZ-RL7 can support a 2.4 GHz application because its stated maximum synthesizer frequency is 3 GHz. The RF VCO must still cover the required output range, and the prescaler, reference-divider ratio, A counter, and B counter must produce an integer-N division ratio that locks across temperature and supply variation. Phase-noise, spur, and lock-time requirements also need separate verification.
What is the best drop-in replacement for ADF4112BCPZ-RL7?
ADF4113BCPZ is the closest identified drop-in candidate because it belongs to the same Analog Devices integer-N PLL family and uses the comparable 20-lead exposed-pad package. Its higher operating-frequency capability adds value rather than matching every ADF4112 parameter. Confirm pin assignment, supply requirements, prescaler behavior, counter ranges, and programming registers before replacing the ADF4112BCPZ-RL7 in production.
Can ADF4113BCPZ replace ADF4112BCPZ-RL7 on an existing PCB?
ADF4113BCPZ can serve as a candidate replacement when its complete pinout, electrical limits, and programming behavior are compatible with the installed design. The package match supports PCB reuse, but a footprint alone does not establish functional equivalence. Review the official ADF4112 and ADF4113 datasheets, especially maximum frequency, pin functions, reference-divider range, charge-pump options, and register map.
What can replace ADF4112BCPZ-RL7?
The identified replacement candidates are Analog Devices family members such as ADF4113BCPZ, ADF4114BCPZ, and ADF4117BCPZ, subject to pin and register verification. No cross-brand drop-in replacement was confirmed. For any candidate, compare the 20-lead package mapping, operating-frequency ceiling, prescaler options, counter widths, reference divider, charge pump, supply range, and external-VCO requirements before approving a substitution.
Is ADF4112BCPZ-RL7 the same as ADF4112BCPZ?
ADF4112BCPZ-RL7 and ADF4112BCPZ identify the same core ADF4112 device family but carry different ordering suffixes. The -RL7 suffix specifies reel-oriented ordering for the 20-WFQFN exposed-pad package. For BOM and PCB purposes, use the exact ordering code requested by Analog Devices and verify reel orientation, tape orientation, moisture handling, and quantity requirements.
How do I design the loop filter and VCO for ADF4112BCPZ-RL7?
Design the VCO first, with its tuning range covering the required RF output and its gain matching the intended phase-margin calculation. Then select the 4/5 or 8/9 prescaler, reference-divider value, charge-pump current, loop-filter resistance, and loop-filter capacitance according to the Analog Devices design guidance. Verify lock range, lock time, reference spurs, and phase noise across operating temperature rather than copying values without recalculation.
Where can I buy ADF4112BCPZ-RL7 and what is its lead time?
Use the Request a Quote form on this page to request the exact ADF4112BCPZ-RL7 ordering code, current availability, quantity breaks, and lead time. The quote team can confirm reel packaging, order quantity, and shipment timing for your assembly schedule. Request the manufacturer-approved part number to avoid ambiguity with the ADF4112BCPZ ordering code.

Справочные инженерные данные для ADF4112BCPZ-RL7 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose ADF4112BCPZ-RL7 when the RF design requires a programmable integer-N local oscillator below or equal to 3 GHz and the external VCO, loop filter, and reference arrangement can be implemented around the ADF4112 architecture. Its 4 GHz RF bandwidth, selectable 4/5 and 8/9 prescalers, 6-bit A counter, 13-bit B counter, and 20-WFQFN exposed-pad package make it suitable for compact wireless receiver, transmitter, and RF test circuits. Consider ADF4113BCPZ when the design needs the family's higher-frequency capability and you have verified pin and programming compatibility. Consider ADF4114BCPZ when its device-specific frequency range or functions satisfy the channel plan, and consider ADF4117BCPZ only when its lower frequency ceiling still covers every required output. For every candidate, validate the VCO tuning range, counter ratio, lock range, phase noise, reference spurs, settling time, and exposed-pad layout before approving a substitution.

Сравнение с аналогами

Параметр Этот товар ADF4113BCPZ ADF4114BCPZ ADF4117BCPZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 20-WFQFN Exposed Pad, CSP 20-WFQFN Exposed Pad, CSP 20-WFQFN Exposed Pad, CSP 20-WFQFN Exposed Pad, CSP
Device Type Single, integer-N RF PLL frequency synthesizer Integer-N RF PLL frequency synthesizer Integer-N RF PLL frequency synthesizer Integer-N RF PLL frequency synthesizer

Ключевые отличия

  • Higher operating-frequency capability (против ADF4113BCPZ)
  • 3 GHz synthesis ceiling with 4 GHz RF bandwidth (против ADF4117BCPZ)
  • Single-family programming environment (против ADF4114BCPZ)

Заметки по проектированию

Use the manufacturer application layout as the foundation for the reference input, charge-pump output, feedback input, supply decoupling, and exposed-pad connection. Keep the sensitive phase-detector and feedback paths away from the VCO control line and minimize loop-filter area. A compact ground return around the exposed pad improves thermal performance, but the pad connection and pin mapping must follow the official ADF4112 package drawing.

Do not select the ADF4112BCPZ-RL7 solely from its 3 GHz maximum rating. Confirm that the external VCO covers every required channel, that the selected 4/5 or 8/9 prescaler provides adequate division range, and that the reference-divider and A/B counters generate the intended integer-N ratio. Check lock range across temperature and supply tolerance before committing the PCB.

Reference-divider pulses and charge-pump current can create harmonics that interfere with sensitive RF stages. Place the loop filter close to the charge-pump output and VCO tuning input, use a properly terminated reference source, and route high-speed feedback away from sensitive analog nodes. Evaluate conducted and radiated emissions with the final enclosure and external VCO because PCB-level behavior can differ substantially from schematic-level expectations.

Use the exposed pad and PCB copper area as the primary thermal path, following the manufacturer's land-pattern guidance. Keep the analog ground connection consistent with the datasheet recommendation and avoid placing a thermal break beneath the pad. Thermal performance depends on copper area, board layers, airflow, and neighboring heat sources, so calculate the junction-temperature rise for the maximum ambient and supply condition.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product page identifies the ADF4112 as a production device but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status on the cited page.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ADF4112BCPZ-RL7 datasheet ADF4112BCPZ-RL7 datasheet pdf ADF4112BCPZ-RL7 pinout ADF4112BCPZ-RL7 equivalent ADF4112BCPZ-RL7 replacement ADF4112BCPZ-RL7 cross reference ADF4112BCPZ-RL7 vs ADF4113BCPZ ADF4112BCPZ-RL7 price ADF4112BCPZ-RL7 stock Analog Devices ADF4112BCPZ-RL7 ADF4112BCPZ 3GHz integer-N PLL ADF4112BCPZ 20-WFQFN pinout ADF4112BCPZ application circuit ADF4112BCPZ RF local oscillator

Связанные компоненты & термины

Analog Devices ADF4112BCPZ-RL7 ADF4112 ADF4113BCPZ ADF4114BCPZ ADF4117BCPZ integer-N PLL frequency synthesizer phase-locked loop radio-frequency synthesizer local oscillator phase-frequency detector charge pump dual-modulus prescaler reference divider voltage-controlled oscillator loop filter RF bandwidth 20-WFQFN exposed-pad CSP surface-mount package wireless receiver wireless transmitter RF up-conversion RF down-conversion clock-and-timing IC
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ