Analog Devices

ADM238LARZ - 4/4 RS-232 Transceiver, 120 kbps | Analog Devices

Артикул: ADM238LARZ ✓ Активен
4.75 V to 5.25 V Vdss ≤1 µA Id 24-pin SOIC Package
MOQ: 1 |

ADM238LARZ Обзор

The Analog Devices ADM238LARZ is a low-power, four-driver and four-receiver RS-232 transceiver operating from a single 5 V supply at up to 120 kbps in a 24-pin SOIC package. It provides integrated dc-to-dc converters that produce approximately ±9 V output swings, allowing RS-232 communication without external ±12 V supplies.

An RS-232 transceiver is an interface IC that combines differential line drivers and receivers for point-to-point serial communication. The ADM238L belongs to the ADM2xx interface family and supports EIA-232-E and V.28 communications requirements. Its integrated charge-pump circuitry simplifies system power architecture while reducing the number of external power rails required by an RS-232 port.

Key features include a 4.75 V to 5.25 V supply range, four transmit channels, four receive channels, a 120 kbps maximum data rate, and operation from small 1 µF capacitors. The device also provides low-power shutdown with supply current no greater than 1 µA. Receiver inputs accept signals up to ±30 V, improving tolerance of transients and off-port voltage conditions encountered in industrial communication environments.

The ADM238LARZ is designed for full-duplex RS-232 links, providing four independent driver outputs and four receiver inputs in one package. Integrated dc-to-dc converters generate the bipolar voltage needed for RS-232 output levels from the single 5 V system supply. This architecture is useful when a board cannot provide the traditional ±12 V or ±15 V RS-232 rail but still needs standards-compliant driver swing.

Typical applications include industrial serial-port equipment, instrumentation, test and measurement systems, data acquisition units, and communications interfaces built around legacy DB9 or equivalent RS-232 connectors. The four-channel arrangement reduces package count when several RS-232 ports must be supported on a compact board.

When laying out the design, place the required 1 µF capacitors close to their associated supply and charge-pump pins. Keep RS-232 driver outputs away from sensitive analog and high-speed digital traces, and connect the device ground to the appropriate interface reference ground. Confirm connector-side protection requirements separately because receiver input tolerance does not replace a correctly selected surge-protection network.

This product page combines the manufacturer’s electrical specifications, package and lifecycle information with practical application guidance, interface trade-offs, and an engineering-focused comparison of documented ADM238L variants. It is intended to help designers determine whether the ADM238LARZ matches their voltage, channel-count, speed, and packaging requirements before committing a board layout.

Аналоги без доработки для ADM238LARZ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

ADM238LARZ Характеристики

Product Type RS-232 transceiver
Number of Drivers 4
Number of Receivers 4
Operating Mode Full duplex
Supply Voltage Range 4.75 V to 5.25 V
Maximum Data Rate 120 kbps
RS-232 Output Swing ±9 V with a 5 V supply
External Capacitor Value 1 µF
Shutdown Supply Current ≤1 µA
Receiver Input Voltage Range ±30 V
Compliance EIA-232-E and V.28
Корпус 24-pin SOIC
Package Width 7.50 mm
Тип монтажа Surface mount
Packaging Tube
Latch-Up Protection Latch-up free

Руководство по цоколевке ADM238LARZ в корпусе 7.50 mm

Цоколевка для ADM238LARZ (корпус 7.50 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 7.50 mm для ADM238LARZ

Нет подробных данных о распиновке для ADM238LARZ.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ADM238LARZ подходит для 6 применениеs: Industrial Serial Port Interface, Instrumentation and Data Acquisition, Test and Measurement Equipment, Communications and Networking Equipment, Data Acquisition Units, Embedded Serial Port Expansion.

🏭

Industrial Serial Port Interface

The ADM238LARZ suits industrial equipment that needs several RS-232 ports but has only a 5 V power rail. Its four drivers and four receivers support full-duplex channels at up to 120 kbps, while the integrated dc-to-dc converters generate approximately ±9 V output swing without separate positive and negative rails. A system can therefore place multiple serial links behind a single interface IC. The design must still provide the specified 1 µF charge-pump capacitors, maintain a quiet 5 V supply, and use connector-side protection appropriate to the installation environment.

🔧

Instrumentation and Data Acquisition

The ADM238LARZ is useful in laboratory instruments and data-acquisition equipment that exchanges commands and measurements through RS-232. Four transmit and four receive channels reduce the number of interface ICs required on a crowded control board, and the 120 kbps rate is suitable for many command and measurement protocols. Because the device runs from a single 4.75 V to 5.25 V supply, it integrates easily with modern digital systems. Designers should verify the protocol’s timing requirements and provide reliable reference grounding between the instrument and connected equipment.

🔧

Test and Measurement Equipment

The ADM238LARZ can connect test instruments, programmable supplies, and laboratory controllers that retain RS-232 command interfaces. Its four full-duplex channels allow several devices to share one host through separate port circuits, while 120 kbps operation covers common serial-control protocols. The integrated converters eliminate a separate ±12 V supply from the instrument’s power tree. Keep the RS-232 traces away from sensitive measurement circuitry, use the datasheet’s charge-pump capacitor layout, and install suitable protection at exposed connectors.

🌐

Communications and Networking Equipment

The ADM238LARZ supports legacy RS-232 links found in communications equipment, routers, and service interfaces that have not migrated to differential signaling. Four drivers and four receivers provide a compact implementation of multiple point-to-point links, and the 120 kbps rate accommodates common configuration and control protocols. The single 5 V operating range simplifies interface design around modern processors. Engineers should confirm that each connected port uses the correct signal-to-ground reference and add ESD or surge protection where cables leave the enclosure.

📡

Data Acquisition Units

The ADM238LARZ can connect a compact data-acquisition unit to legacy laboratory computers or controller boards over RS-232. Combining four drivers and four receivers in one 24-pin SOIC allows several sensor or instrument channels to share the interface section without multiplying board area. Its 120 kbps limit should be compared with the actual sample transfer rate and protocol overhead. Use short, well-routed traces, maintain a common reference ground, and follow the manufacturer’s capacitor placement recommendations to preserve stable charge-pump operation.

🖥️

Embedded Serial Port Expansion

The ADM238LARZ expands a processor board that lacks enough native RS-232 ports. Four driver outputs and four receiver inputs can support multiple full-duplex connections while operating from the same 5 V rail used by the embedded controller. The device’s 120 kbps data rate is appropriate for configuration, diagnostic, and control traffic rather than high-throughput storage transfer. Firmware must control the supported UART channels and flow-control requirements, and the PCB should reserve connector protection and unobstructed routing space for each external cable attachment.

Сводка рекомендуемых товаров

ADM238LJRZ-REEL Same-family 24-pin SOIC RS-232 interface in reel packaging Используется в: Industrial Serial Port Interface, Instrumentation and Data Acquisition, Communications and Networking Equipment, Data Acquisition Units, Embedded Serial Port Expansion ADM238LJN Analog Devices Используется в: Industrial Serial Port Interface, Data Acquisition Units ADM238LARZ Analog Devices Используется в: Instrumentation and Data Acquisition, Test and Measurement Equipment, Communications and Networking Equipment, Embedded Serial Port Expansion ADM238LAQ Analog Devices Используется в: Test and Measurement Equipment
What is the ADM238LARZ?
The ADM238LARZ is a four-driver, four-receiver RS-232 transceiver for full-duplex serial communication at up to 120 kbps. According to the Analog Devices ADM238L datasheet, it operates from a single 4.75 V to 5.25 V supply and uses integrated dc-to-dc converters to produce approximately ±9 V RS-232 output swing. It is packaged in a 24-pin SOIC for surface-mount industrial and instrumentation equipment.
What is the operating voltage of ADM238LARZ?
The ADM238LARZ operates from a 4.75 V to 5.25 V supply, making it a single 5 V RS-232 interface device. According to the Analog Devices ADM238L datasheet, its internal dc-to-dc converters generate the bipolar voltage required by the four line drivers. This allows the device to deliver approximately ±9 V output swing without requiring separate positive and negative RS-232 supply rails.
How many RS-232 channels does ADM238LARZ support?
The ADM238LARZ provides four RS-232 drivers and four RS-232 receivers in one 24-pin SOIC package. According to the Analog Devices ADM238L datasheet, the device operates in full-duplex mode and supports data rates up to 120 kbps. The four-channel arrangement is useful for compact systems that need multiple serial interfaces but have insufficient board area for separate single-channel transceivers.
What is the maximum data rate of ADM238LARZ?
The maximum supported data rate is 120 kbps. According to the Analog Devices ADM238L datasheet, the ADM238LARZ complies with EIA-232-E and V.28 specifications while operating from a single 5 V supply. For reliable operation, the connected UART, cable, connector, and signal-integrity characteristics should also support the selected baud rate.
Does ADM238LARZ require external ±12 V power?
No, the ADM238LARZ does not require external ±12 V power for normal operation. According to the Analog Devices ADM238L datasheet, its on-board dc-to-dc converters generate approximately ±9 V output swing from a 5 V supply. The remaining application requirements are the specified 1 µF external capacitors, a stable 5 V rail, correct grounding, and suitable connector-side protection.
Where can I download the ADM238LARZ datasheet PDF?
The official ADM238L datasheet and product documentation are available through Analog Devices at https://www.analog.com/en/products/adm238l.html. The ADM238LARZ is the 24-pin SOIC orderable variant of the ADM238L family. Use the manufacturer’s pin-description table, electrical-characteristics tables, and application information when assigning pins and selecting external capacitors.
Where can I find the ADM238LARZ pinout?
The authoritative ADM238LARZ pin assignment is shown in the pin-description table in the Analog Devices ADM238L datasheet. The ADM238LARZ uses a 24-pin SOIC with four driver outputs, four receiver inputs, supply connections, ground, and charge-pump capacitor nodes. Assign PCB nets from that table rather than relying on a third-party pinout image.
Can ADM238LJRZ-REEL replace ADM238LARZ?
ADM238LJRZ-REEL uses the same 24-pin SOIC family and 120 kbps RS-232 interface, but the -REEL order code indicates reel packaging rather than the tube packaging of ADM238LARZ. According to the Analog Devices ADM238L family information, both order variants belong to the ADM238L family. Confirm the exact suffix, pin configuration, temperature grade, and production status before treating it as a procurement equivalent.
When should I choose ADM238LARZ over a single-channel RS-232 transceiver?
Choose ADM238LARZ when the design needs four RS-232 drivers and four receivers and can use a 24-pin SOIC footprint. According to the Analog Devices ADM238L datasheet, the device supports full-duplex RS-232 communication at 120 kbps from a single 5 V supply. A single-channel transceiver may be preferable when only one RS-232 direction pair is needed and board area or channel granularity is more important.
Is ADM238LARZ suitable for industrial RS-232 equipment?
The ADM238LARZ is suitable for many industrial RS-232 interfaces because it combines four channels, 120 kbps operation, a 5 V supply, and receiver input tolerance up to ±30 V. According to the Analog Devices ADM238L datasheet, it meets EIA-232-E and V.28 specifications. For harsh installations, verify the specified operating-temperature grade and add suitable connector-side surge protection.
What is the shutdown current of ADM238LARZ?
The ADM238LARZ draws no more than 1 µA in shutdown according to the Analog Devices ADM238L datasheet. This low-power state is useful when a portable instrument must disable its serial interface without removing system power. Confirm that the external charge-pump capacitors and the connected UART lines do not create additional leakage paths that prevent the system from reaching the expected sleep current.
What can replace ADM238LARZ?
The closest documented family options are ADM238LJRZ-REEL and the tube-packaged ADM238LARZ itself; however, the verified family information does not establish five distinct drop-in replacements. ADM238LJN and ADM238LAQ use different packages, so they are not drop-in substitutes for a 24-pin SOIC board. Any replacement must be checked for identical pin assignment, 4.75 V to 5.25 V supply operation, four channels, and at least 120 kbps operation.
What is the best cross-brand equivalent for ADM238LARZ?
No verified cross-brand equivalent was identified for the ADM238LARZ. A valid substitute must match the 24-pin SOIC footprint and pin functions, provide four drivers and four receivers, operate from a single 5 V supply, and sustain at least 120 kbps while meeting EIA-232-E and V.28 requirements. Use the Request a Quote form on this page if you need an engineering review of a candidate replacement.
How do I buy ADM238LARZ and check its price?
Use the Request a Quote form on this page to request current pricing, stock confirmation, and lead time for ADM238LARZ. The component is a production part in the ADM238L family and is offered in a 24-pin SOIC tube package. Commercial availability and production allocation can change, so the quote response should be used for the current order rather than a historical listing value.
What are the key specifications of ADM238LARZ that engineers should know?
The ADM238LARZ is a 4-driver, 4-receiver, full-duplex RS-232 transceiver with a 120 kbps maximum data rate and a 4.75 V to 5.25 V supply range. According to the Analog Devices ADM238L datasheet, it provides approximately ±9 V output swing from integrated dc-to-dc converters, uses 1 µF capacitors, enters a shutdown state at no more than 1 µA, and accepts receiver inputs up to ±30 V.

Справочные инженерные данные для ADM238LARZ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose ADM238LARZ when the design requires four RS-232 drivers and four receivers, a maximum data rate of 120 kbps, and operation from a single 4.75 V to 5.25 V rail. Its 24-pin SOIC package is appropriate for compact surface-mount equipment and provides integrated dc-to-dc converters that eliminate separate positive and negative RS-232 supply rails. ADM238LJRZ-REEL may be preferable for production assembly requiring reel-fed packaging, provided its exact suffix and ordering conditions are confirmed. ADM238LJN and ADM238LAQ belong to the same functional family but use DIP and CDIP packages, respectively, so they require different PCB footprints and are not drop-in choices for an existing ADM238LARZ layout. For any other candidate replacement, verify the complete pin assignment, driver and receiver count, supply voltage, data rate, EIA-232-E and V.28 compliance, external capacitor requirements, temperature range, and lifecycle status before releasing the PCB.

Сравнение с аналогами

Параметр Этот товар
Brand Analog Devices
Package 24-pin SOIC
Product Type RS-232 transceiver
Number of Drivers 4
Number of Receivers 4
Operating Mode Full duplex
Supply Voltage Range 4.75 V to 5.25 V
Maximum Data Rate 120 kbps
RS-232 Output Swing ±9 V with a 5 V supply
External Capacitor Value 1 µF
Shutdown Supply Current ≤1 µA
Receiver Input Voltage Range ±30 V

Ключевые отличия

  • Combines four full-duplex RS-232 channels in one interface IC (против ADM238LJN)
  • Uses a single 5 V rail with integrated dc-to-dc conversion (против ADM238LAQ)
  • Supports four receiver inputs with ±30 V tolerance (против ADM238LJRZ-REEL)

Заметки по проектированию

Place the 1 µF charge-pump capacitors close to their specified pins using the shortest possible traces. Keep these high-current switching paths away from receiver inputs, low-level analog signals, and crystal or clock routing. Use a continuous ground plane under the device where practical and connect the ground pins directly to that plane to minimize return-path inductance and charge-pump noise coupling.

Do not treat the ±30 V receiver input tolerance as a substitute for connector protection. The tolerance helps with transients and off-port voltage conditions, but exposed cables can present much larger surge voltages. Select an appropriate RS-232 TVS or surge network, verify its capacitance and standoff voltage against the 120 kbps requirement, and install it near the connector rather than at the transceiver.

Separate RS-232 driver outputs from sensitive receiver and measurement circuits to prevent output crosstalk into low-level inputs. Route each interface as a referenced, point-to-point connection rather than as an uncontrolled multidrop bus. Preserve the recommended ground relationship between communicating systems, and avoid long parallel runs with unrelated digital or switching-regulator traces where a cable transition could couple noise into the port.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The device meets EIA-232-E and V.28 interface specifications and is described as latch-up free. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established for this exact orderable variant.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ADM238LARZ datasheet ADM238LARZ pinout ADM238LARZ datasheet pdf ADM238LARZ equivalent ADM238LARZ replacement ADM238LARZ cross reference ADM238LARZ footprint ADM238LARZ price ADM238LARZ stock Analog Devices ADM238LARZ ADM238LARZ vs ADM238LJRZ ADM238LARZ 24 SOIC pinout ADM238LARZ RS-232 application circuit

Связанные компоненты & термины

Analog Devices ADM238LARZ ADM238L ADM238LJRZ-REEL ADM238LJN ADM238LAQ ADM2xx RS-232 transceiver RS-232 interface IC line driver line receiver full duplex EIA-232-E V.28 dc-to-dc converter charge-pump capacitor 5 V power supply 120 kbps data rate receiver input tolerance 24-pin SOIC surface mount industrial communications test and measurement data acquisition
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ