ADM3066EBRMZ-RL7 - 50Mbps RS-485 Transceiver | Analog Devices
Артикул: ADM3066EBRMZ-RL7 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2.35 | $2,35 |
| 10 | $2.11 | $21,10 |
| 100 | $1.78 | $178,00 |
| 500 | $1.52 | $760,00 |
| 1.000 | $1.35 | $1.350,00 |
ADM3066EBRMZ-RL7 Обзор
RS-485 is a robust differential signaling standard used for multi-point communication over long distances. It allows multiple transceivers to share a two-wire bus, with differential signaling providing immunity to common-mode noise. The ADM3066E is a transceiver, meaning it combines a driver and receiver in one package, enabling bidirectional communication on a half-duplex bus. This device is part of the ADM306x family, which includes variants with different data rates and ESD protection levels.
Key features of the ADM3066EBRMZ-RL7 include ±12 kV IEC 61000-4-2 ESD protection on the A and B bus pins, ensuring robustness in harsh industrial environments. The wide VIO range allows direct connection to 1.8 V, 2.5 V, or 3.3 V logic without level shifters. The device also features a low quiescent current, making it suitable for power-sensitive applications. The half-duplex configuration simplifies wiring, as only two bus lines are required.
From a technical perspective, the ADM3066E uses a differential driver with controlled slew rates to minimize EMI and reflections. The receiver has a wide common-mode input range of -7 V to +12 V, allowing operation in noisy environments with ground potential differences. The device includes thermal shutdown and short-circuit protection on the driver outputs, enhancing reliability. The MSOP package has a thermal resistance of approximately 206 °C/W, which should be considered for high-temperature operation.
Typical applications include industrial control systems, building automation (HVAC, lighting), motor drives, and networked sensors. The 50 Mbps data rate supports high-speed data acquisition and real-time control. The wide VIO range simplifies integration with modern microcontrollers and FPGAs.
When designing with this device, ensure proper termination (120 Ω) at both ends of the bus to minimize reflections. The A and B pins should be biased to a known state when the bus is idle to avoid undefined receiver outputs. Place decoupling capacitors close to the VCC and VIO pins.
Аналоги без доработки для ADM3066EBRMZ-RL7 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ADM3066EBRMZ-RL7 (тот же форм-фактор и посадочное место) — отличается по Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ADM3066EBRMZ
✅ Прямая замена✓ В наличии
$1.3 / шт.
Открыть даташит →ADM3066EBRMZ-R7
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADM3066EBRMZ-RL7 Характеристики
| Type | RS-485 Transceiver |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Half |
| Скорость передачи данных | 50 Mbps |
| Supply Voltage (VCC) | 3.0 V to 5.5 V |
| Logic Supply Voltage (VIO) | 1.62 V to 5.5 V |
| ESD Protection (IEC 61000-4-2) | ±12 kV on A/B pins |
| Common-Mode Input Range | -7 V to +12 V |
| Корпус | 10-Lead MSOP |
| Диапазон рабочих температур | -40°C to +125°C |
| Thermal Resistance (θJA) | 206 °C/W (approx.) |
| Статус RoHS | Compliant |
Конфигурация выводов ADM3066EBRMZ-RL7
| Контакт 1 | VCC — Power supply input (3.0 V to 5.5 V) |
| Контакт 2 | RO — Receiver output |
| Контакт 3 | RE — Receiver enable (active low) |
| Контакт 4 | DE — Driver enable (active high) |
| Контакт 5 | DI — Driver input |
| Контакт 6 | GND — Ground |
| Контакт 7 | A — Non-inverting bus pin |
| Контакт 8 | B — Inverting bus pin |
| Контакт 9 | VIO — Logic supply voltage (1.62 V to 5.5 V) |
| Контакт 10 | NC — No connect |
Типичное применение
ADM3066EBRMZ-RL7 подходит для 6 применениеs: Industrial Automation, Building Automation, Motor Control, Networked Sensors, Telecommunication Infrastructure, Test and Measurement.
Industrial Automation
The ADM3066EBRMZ-RL7 is ideal for industrial automation networks where high-speed data transfer and robustness are critical. Its 50 Mbps data rate supports real-time control and data acquisition in PLCs, motor drives, and robotic systems. The ±12 kV IEC ESD protection ensures reliability in harsh factory environments with electrostatic discharge risks. The wide common-mode range (-7 V to +12 V) allows operation in the presence of ground potential differences between nodes, common in distributed automation systems. The half-duplex configuration simplifies wiring, reducing installation cost and complexity. With a supply voltage range of 3.0 V to 5.5 V, it can be powered from standard industrial rails, and the VIO pin enables direct connection to 3.3 V or 1.8 V logic, eliminating level shifters.
Рекомендуется
Building Automation
In building automation systems, the ADM3066EBRMZ-RL7 enables reliable communication between HVAC controllers, lighting systems, and sensors over long cable runs. Its 50 Mbps data rate supports fast polling of multiple nodes, while the low quiescent current helps meet energy efficiency requirements. The wide VIO range (1.62 V to 5.5 V) allows direct interfacing with low-power microcontrollers, reducing component count. The device's robustness against ESD and its wide common-mode range ensure stable operation in electrically noisy environments, such as those with motor starters or fluorescent lighting. The half-duplex bus architecture minimizes wiring, which is cost-effective for large installations. The MSOP package is compact, fitting into space-constrained controllers and sensor nodes.
Рекомендуется
Motor Control
The ADM3066EBRMZ-RL7 is well-suited for motor control systems that require high-speed communication between the central controller and multiple drives. Its 50 Mbps data rate enables real-time torque and speed commands, while the robust ESD protection safeguards against transients from motor cables. The wide common-mode range accommodates ground shifts caused by high currents. The device's thermal shutdown protection prevents damage during fault conditions. The half-duplex interface reduces wiring complexity in multi-drive setups. With a supply voltage up to 5.5 V, it can operate from the same rail as many motor drivers. The VIO pin allows seamless connection to 3.3 V DSPs or FPGAs used in advanced motor control algorithms.
Рекомендуется
Networked Sensors
For distributed sensor networks, the ADM3066EBRMZ-RL7 provides a reliable, high-speed interface for transmitting sensor data to a central hub. Its 50 Mbps data rate supports high-resolution sensors with fast update rates. The low power consumption is beneficial for battery-powered or energy-harvesting nodes. The wide VIO range allows direct connection to low-voltage sensors and microcontrollers. The device's ESD protection ensures longevity in field installations. The half-duplex bus enables multi-drop topology, allowing many sensors to share a single pair of wires. The MSOP package is ideal for compact sensor modules. The wide operating temperature range (-40°C to +125°C) suits outdoor or industrial environments.
Рекомендуется
Telecommunication Infrastructure
In telecom base stations and networking equipment, the ADM3066EBRMZ-RL7 facilitates high-speed communication between line cards and control modules. Its 50 Mbps data rate supports high-bandwidth signaling, while the wide supply range accommodates various board voltages. The robust ESD protection is critical for equipment exposed to lightning-induced surges. The device's common-mode range ensures reliable operation over long backplane traces. The half-duplex interface is suitable for point-to-point or multi-drop configurations. The VIO pin enables direct connection to FPGA or ASIC logic levels, simplifying design. The MSOP package saves board space in dense telecom racks.
Рекомендуется
Test and Measurement
The ADM3066EBRMZ-RL7 is used in test and measurement equipment for high-speed data acquisition and instrument control. Its 50 Mbps data rate allows rapid data transfer from digitizers to host computers. The device's low jitter and controlled slew rates minimize signal integrity issues. The wide common-mode range supports connection to devices with different ground potentials. The ESD protection safeguards against static discharge during handling. The half-duplex interface is common in GPIB-like buses. The VIO pin enables direct connection to 3.3 V or 5 V logic, simplifying integration. The MSOP package is suitable for compact benchtop instruments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADM3066EBRMZ-RL7 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADM3066EBRMZ | ADM3066EBRMZ-R7 | ADM3066EBCPZ | MAX3485E | SN65HVD72 |
|---|---|---|---|---|---|---|
| Package | 10-Lead MSOP | 10-Lead MSOP | 10-Lead MSOP | 10-Lead LFCSP | 8-SOIC | 8-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Maxim Integrated | Texas Instruments |
| Data Rate | 50 Mbps | 50 Mbps | 50 Mbps | 50 Mbps | 10 Mbps | 20 Mbps |
| Supply Voltage (VCC) | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Logic Supply (VIO) | 1.62 V to 5.5 V | 1.62 V to 5.5 V | 1.62 V to 5.5 V | 1.62 V to 5.5 V | None (VCC only) | None (VCC only) |
| ESD Protection | ±12 kV IEC 61000-4-2 | ±12 kV IEC 61000-4-2 | ±12 kV IEC 61000-4-2 | ±12 kV IEC 61000-4-2 | ±15 kV HBM | ±16 kV HBM |
| Common-Mode Range | -7 V to +12 V | -7 V to +12 V | -7 V to +12 V | -7 V to +12 V | -7 V to +12 V | -7 V to +12 V |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +85°C | -40°C to +125°C |
Ключевые отличия
- 50 Mbps data rate (против MAX3485E)
- Wide VIO range (1.62 V to 5.5 V) (против SN65HVD72)
- ±12 kV IEC ESD protection (против MAX3485E)
Заметки по проектированию
Place 0.1 µF decoupling capacitors close to the VCC and VIO pins to filter high-frequency noise. Use a 10 µF bulk capacitor on VCC if the supply is shared with other components. Keep the traces between the transceiver and the bus connector as short as possible to minimize parasitic inductance and reflections.
Terminate the RS-485 bus with 120 Ω resistors at both ends to match the characteristic impedance of the twisted-pair cable. This prevents signal reflections that can cause data errors at 50 Mbps. For longer cable runs, consider using a bias network (pull-up on A and pull-down on B) to ensure a defined idle state.
Do not exceed the absolute maximum ratings for VCC and VIO. Ensure the VIO voltage does not exceed VCC by more than 0.3 V to avoid latch-up. When the bus is idle, the receiver output may be undefined if the A and B pins are left floating; use bias resistors to set a known state. Also, avoid enabling the driver and receiver simultaneously in half-duplex mode.
Информация о соответствии
RoHS compliant per Analog Devices product page. Other compliance data not explicitly stated in the provided sources.
