Analog Devices

ADM3222AN - 460 kbps Dual RS-232 Transceiver | Analog Devices

Артикул: ADM3222AN ✓ Активен
3.3 V Vdss 18-pin PDIP, 0.300 in (7.62 mm) pitch Package
MOQ: 1 |

ADM3222AN Обзор

The Analog Devices ADM3222AN is a dual-channel RS-232/V.28 interface transceiver rated for data rates up to 460 kbps, operating from a single 3.3 V supply in an 18-pin PDIP package. The device combines two RS-232 line drivers with two receivers, supports low-power shutdown and enable control, and uses four external 0.1 µF charge-pump capacitors to generate the bipolar voltage required by RS-232.

An RS-232 transceiver is an interface IC that converts between digital logic levels and the voltage levels used by RS-232 serial links. It belongs to the broader communications-interface hierarchy: RS-232 transceiver → serial-interface IC → interface IC → semiconductor. Such devices bridge UART, UART-over-RS-232, or legacy peripheral ports to cables and equipment using balanced differential signaling.

Key features include operation at 460 kbps, compliance with EIA-232E and CCITT V.28 specifications, a 3.3 V single-supply architecture, and ESD protection specified to IEC 1000-4-2. The ADM3222 adds enable and shutdown circuitry for systems where the interface must be placed into a low-consumption state. Its two transmitters and two receivers make it suitable for consolidating two serial channels onto one device.

The on-chip charge-pump circuit uses four external 0.1 µF capacitors to develop positive and negative voltage rails for the RS-232 drivers. This architecture permits operation without a dual supply and reduces system complexity. EIA-232E and CCITT V.28 conformance support interoperability with conventional RS-232 equipment, while the 460 kbps maximum data rate provides more bandwidth than the slower legacy communication rates commonly associated with older RS-232 ports.

Typical applications include industrial serial-port expansion, instrumentation interfaces, point-of-sale equipment, data acquisition systems, and legacy peripheral connections that must be retained alongside newer low-voltage digital circuitry. The enable and shutdown controls are particularly useful in battery-powered portable instruments where inactive interface current matters.

Circuit implementation requires careful capacitor placement near the charge-pump pins, short RS-232 traces, and protection appropriate to the cable environment. Confirm that the host logic levels and selected UART baud rate are compatible with the 3.3 V interface and 460 kbps device capability.

This page consolidates interface specifications, application guidance, design considerations, and practical sourcing information for engineers evaluating the ADM3222AN in compact RS-232 implementations.

Аналоги без доработки для ADM3222AN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ADM3222AN (тот же форм-фактор и посадочное место) — отличается по Interface Standard, Maximum Data Rate, Mounting Type, Package.

Maxim Integrated
Interface Standard: True RS-232
Maximum Data Rate: 1 Mbps
Mounting Type: Through Hole
Сравнить с ADM3222AN →

LTC1385CN

✅ Прямая замена
📦 PDIP-18
Same 18-pin PDIP format and 3.3 V RS-232 use class; documented maximum data rate is 0 kbps versus 460 kbps on ADM3222AN pending line-by-line timing verification

📋 Справочный аналог (нет в каталоге)

MAX3222CPE

✅ Прямая замена
📦 PDIP-18
Same 18-pin PDIP format and single 3.3 V supply; documented rate differs by 0 kbps at the 460 kbps class, while control and ESD details require verification

📋 Справочный аналог (нет в каталоге)

MAX3232CPE+

✅ Прямая замена
Maxim Integrated
📦 PDIP-18
RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · 4 x 0.1 uF · True RS-232 · TTL/CMOS

Уточнить цену

Открыть даташит →

MAX3222EPE

✅ Прямая замена
📦 PDIP-18
Same 18-pin PDIP format and 460 kbps data-rate class; MAX3222EPE is the enhanced ESD-oriented suffix and differs from ADM3222AN in its protection qualification details

📋 Справочный аналог (нет в каталоге)

MAX3232EPE

✅ Прямая замена
📦 PDIP-18
Same 18-pin PDIP format and 460 kbps data-rate class; MAX3232EPE emphasizes enhanced ESD protection, with shutdown and pin-level behavior differing from ADM3222AN

📋 Справочный аналог (нет в каталоге)

ADM3222AN Характеристики

Product Type Dual RS-232 transceiver
Channel Count 2 channels
Transmitter Count 2 transmitters
Receiver Count 2 receivers
Maximum Data Rate 460 kbps
Напряжение питания 3.3 V
Interface Standard EIA-232E and CCITT V.28
Charge-Pump Capacitor 0.1 µF each; 4 capacitors required
Power Control Enable and shutdown functions
ESD Protection Standard IEC 1000-4-2
Корпус 18-pin PDIP, 0.300 in (7.62 mm) pitch
Тип монтажа Through-hole mounting
Supply Configuration Single supply

Руководство по цоколевке ADM3222AN в корпусе 18-pin pdip, 0.300 in (7.62 mm) pitch

Цоколевка для ADM3222AN (корпус 18-pin pdip, 0.300 in (7.62 mm) pitch). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 18-pin pdip, 0.300 in (7.62 mm) pitch для ADM3222AN

Нет подробных данных о распиновке для ADM3222AN.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ADM3222AN подходит для 6 применениеs: Industrial Serial-Port Expansion, Portable Test and Measurement Equipment, Data Acquisition System Interface, Point-of-Sale Terminal Connectivity, Legacy Peripheral Communication, Battery-Powered Field Instrument.

🏭

Industrial Serial-Port Expansion

The ADM3222AN is appropriate for industrial equipment that must retain two legacy RS-232 ports while using a 3.3 V digital control system. Its two transmitters and two receivers support two bidirectional links, while the 460 kbps capability accommodates faster serial configurations than older low-speed ports. EIA-232E and CCITT V.28 operation align it with conventional RS-232 equipment. The enable and shutdown pins also let the controller isolate the interface during idle periods, and the 18-pin PDIP format simplifies assembly in through-hole industrial hardware. Place the four 0.1 µF charge-pump capacitors close to the device and protect the external connector according to the cable and installation environment.

🖥️

Portable Test and Measurement Equipment

The ADM3222AN fits portable instruments that communicate through legacy RS-232 ports while operating from a low-voltage system. Its single 3.3 V supply eliminates the need for a separate negative RS-232 supply, and the shutdown facility can reduce consumption when no measurement session is active. The 460 kbps maximum rate provides useful throughput for transferring results, commands, or configuration data. Enable control can also support controlled startup sequencing between the instrument logic and attached serial equipment. In a handheld design, keep the charge-pump network compact, route the RS-232 signals away from sensitive analog sections, and confirm connector ground and cable-routing requirements for reliable field operation.

📡

Data Acquisition System Interface

The ADM3222AN can provide two communication paths between a data-acquisition controller and external laboratory or process equipment. Two transmitters and two receivers allow command and measurement channels to be implemented with one interface IC, while operation from a single 3.3 V rail simplifies interface power planning. The EIA-232E and CCITT V.28 specifications establish compatibility with conventional serial equipment. A maximum rate of 460 kbps supports efficient command polling and data transfer when both endpoints support that speed. Designers should maintain short charge-pump capacitor connections, observe the datasheet ground arrangement, and place appropriate protection at externally accessible RS-232 connectors where cables leave the enclosure.

🖥️

Point-of-Sale Terminal Connectivity

The ADM3222AN suits point-of-sale terminals, scanners, scales, and related peripherals that retain RS-232 communication links. A single 3.3 V supply reduces power-conversion complexity, while the dual-channel arrangement can serve separate peripherals or provide one channel for status and another for transaction data. The device's 460 kbps capability provides more performance margin than many legacy peripherals require. Use the enable input to coordinate peripheral startup, and use shutdown when the terminal enters a low-power state. The PDIP package suits larger through-hole assemblies, while shorter cable connections and correctly placed charge-pump capacitors will help reduce signal-integrity and EMI problems in retail equipment.

🔧

Legacy Peripheral Communication

The ADM3222AN provides a practical bridge between a modern 3.3 V controller and legacy RS-232 peripherals. Both channels can support bidirectional communication, allowing the controller to exchange commands and receive status or measurements without adding separate driver and receiver ICs. Its EIA-232E and CCITT V.28 conformance supports conventional RS-232 interoperability, and the single-supply charge-pump architecture simplifies board-level integration. For reliable implementation, confirm logic thresholds, select the UART baud rate below the 460 kbps limit, and verify the complete pin configuration in the manufacturer datasheet. External protection and grounding should be considered wherever the attached cable crosses an electrostatic-discharge or noise boundary.

⚡

Battery-Powered Field Instrument

The ADM3222AN is appropriate for battery-powered field instruments that need a low-voltage RS-232 link to a host computer or accessory. Operating from one 3.3 V rail eliminates a separate negative interface supply, and the shutdown and enable functions allow the system to control interface power according to operating state. The device supports data rates up to 460 kbps for transferring measurement records or commands. For an energy-sensitive implementation, verify actual supply and shutdown current against the final system duty cycle rather than relying only on the maximum data-rate specification. Keep the charge-pump capacitors close to their pins, isolate the cable path from sensitive analog circuitry, and use connector-level protection appropriate for field cables.

Сводка рекомендуемых товаров

ADM3202 Related 3.3 V dual RS-232 interface without the ADM3222 shutdown feature Используется в: Industrial Serial-Port Expansion, Data Acquisition System Interface, Point-of-Sale Terminal Connectivity, Legacy Peripheral Communication, Battery-Powered Field Instrument ADM3222ARWZ Surface-mount package option for redesigned equipment Используется в: Industrial Serial-Port Expansion, Point-of-Sale Terminal Connectivity, Battery-Powered Field Instrument ADM1385 Related 3.3 V RS-232 interface family member with shutdown operation Используется в: Portable Test and Measurement Equipment, Data Acquisition System Interface, Legacy Peripheral Communication ADM3222ARWZ-REEL Surface-mount ordering option for automated assembly Используется в: Portable Test and Measurement Equipment
What are the key specifications of ADM3222AN that engineers should know?
The ADM3222AN is a dual RS-232 transceiver with two transmitters, two receivers, a 460 kbps maximum data rate, and a single 3.3 V supply. According to the Analog Devices datasheet, it conforms to EIA-232E and CCITT V.28, requires four external 0.1 µF charge-pump capacitors, and provides enable and shutdown control. The device is offered in an 18-pin PDIP package for through-hole PCB designs.
What is the operating voltage of ADM3222AN?
The ADM3222AN operates from a single 3.3 V supply. According to the Analog Devices datasheet, the internal charge-pump circuit uses four external 0.1 µF capacitors to generate the bipolar voltages needed by the RS-232 drivers. Designers therefore need a 3.3 V rail and four correctly placed charge-pump capacitors, but they do not need a separate negative power supply for the interface.
What is the maximum data rate of ADM3222AN?
The ADM3222AN supports data rates up to 460 kbps. The Analog Devices datasheet identifies this figure as the maximum rate for the ADM3202, ADM3222, and ADM1385 family and states that the devices conform to EIA-232E and CCITT V.28. The connected UART, cable, connector, and system timing must all support the selected operating rate.
How many RS-232 channels does ADM3222AN provide?
The ADM3222AN provides two complete RS-232 channels, each comprising one transmitter and one receiver. According to the Analog Devices datasheet, it is a high-speed 2-channel RS-232/V.28 interface device. This arrangement is useful for compact systems that need bidirectional serial communication but do not require the higher channel count of a four-channel transceiver.
Where can I download the ADM3222AN datasheet PDF?
The official Analog Devices ADM3222 product page is the primary source for the ADM3222AN datasheet and family documentation. It describes the ADM3202, ADM3222, and ADM1385 3.3 V RS-232 transceivers, including their charge-pump, shutdown, enable, and ESD-protection features. Open the Technical Data section on that page and select the corresponding PDF document before assigning pins or designing the charge-pump network.
Where can I find the ADM3222AN pinout?
The ADM3222AN pin assignments are defined in the Analog Devices datasheet pin-configuration table for the 18-pin PDIP package. Use that table and the corresponding package drawing when assigning receiver inputs, driver outputs, supply pins, ground pins, enable, and shutdown. The component database identifies the package as an 18-pin PDIP with 0.300 in (7.62 mm) lead pitch.
What charge-pump capacitors does ADM3222AN require?
The ADM3222AN requires four external 0.1 µF charge-pump capacitors. The Analog Devices datasheet states that these capacitors support the internal voltage doubler and inverter, allowing the RS-232 drivers to operate from one 3.3 V supply. Place all four capacitors close to their designated pins, use short traces, and follow the polarity and grounding arrangement shown in the datasheet application circuit.
What are the benefits of ADM3222AN shutdown and enable control?
The ADM3222AN provides dedicated enable and shutdown functions that allow the interface to enter a lower-power state. The Analog Devices datasheet identifies this circuitry as a distinguishing feature of the ADM3222 compared with the ADM3202. These controls are useful in portable instruments and battery-powered equipment where the RS-232 interface may remain unused for extended periods.
Is ADM3222AN suitable for industrial instrumentation?
The ADM3222AN is suitable for many industrial instrumentation interfaces because it supports 460 kbps, single 3.3 V operation, EIA-232E and CCITT V.28 operation, and IEC 1000-4-2 ESD protection. Its enable and shutdown controls simplify power management in multi-instrument systems. The connected equipment, cable routing, grounding, and connector selection still require appropriate industrial protection practices.
ADM3222AN vs MAX3232 - which is better for a 3.3 V system?
The ADM3222AN is a strong choice for a 3.3 V system requiring two RS-232 channels, operation up to 460 kbps, and dedicated shutdown and enable controls. The Analog Devices datasheet positions the ADM3222 as an upgrade for MAX3222 and MAX3232 applications. Final interchangeability must be confirmed against package, pinout, capacitor values, supply limits, and shutdown behavior rather than inferred from the RS-232 function alone.
What is the difference between ADM3222AN and ADM3222ARWZ?
The ADM3222AN is a through-hole 18-pin PDIP device, while ADM3222ARWZ is a surface-mount 18-lead SOIC version of the same interface family. Their mounting methods differ, so ADM3222ARWZ is not a drop-in replacement on a board designed for ADM3222AN. Use ADM3222AN when the PCB requires through-hole DIP leads; use ADM3222ARWZ only after redesigning the footprint and verifying the pin mapping.
When should I choose ADM3222AN over a four-channel RS-232 transceiver?
Choose ADM3222AN when the design needs exactly two RS-232 channels and benefits from enable and shutdown control. A four-channel transceiver is preferable when four physical ports are required or when channel expansion reduces board area. The ADM3222AN provides two transmitters, two receivers, 460 kbps operation, and single 3.3 V supply operation, making it a focused choice for compact two-port designs.
Is ADM3222AN suitable for battery-powered portable equipment?
The ADM3222AN is suitable for battery-powered portable equipment because it operates from 3.3 V and includes shutdown and enable circuitry. The Analog Devices product documentation identifies low-power shutdown as a family feature intended for portable instruments. The overall battery benefit still depends on the selected operating state, external UART behavior, cable connection, and the system requirement for the RS-232 interface to remain active.
What is the best drop-in replacement for ADM3222AN?
No verified same-package, pin-to-pin drop-in replacement for the ADM3222AN was identified in the available cross-reference records. The ADM3222ARWZ has a different SOIC package and therefore cannot replace the 18-pin PDIP part without PCB changes. Before approving another candidate, verify its 18-pin PDIP footprint, pin assignments, 3.3 V operation, charge-pump capacitor arrangement, shutdown behavior, and 460 kbps capability.
Where can I buy ADM3222AN and what is its lead time?
Use the Request a Quote form on this page to request current ADM3222AN availability, lead time, and order quantity. The listing identifies the component as an Analog Devices 18-pin PDIP RS-232 transceiver, but current stock and delivery schedules can change. Provide the required quantity, package preference, and destination country with the request so procurement can return an actionable quotation.

Справочные инженерные данные для ADM3222AN — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ADM3222AN when the PCB requires an 18-pin through-hole RS-232 transceiver, two bidirectional channels, single 3.3 V operation, and controllable enable or shutdown states. Its 460 kbps capability, EIA-232E and CCITT V.28 support, and IEC 1000-4-2 ESD protection make it appropriate for industrial instruments, legacy peripherals, and compact systems retaining older serial connectivity. ADM3222ARWZ is appropriate only for a new surface-mount design because its package differs from the PDIP footprint. Consider ADM3202 when shutdown control is unnecessary and the simpler family function is sufficient. Consider ADM1385 when its specific channel, power-management, or package characteristics better match the system. No verified same-package drop-in substitute was established, so any replacement should undergo pin, voltage, timing, and capacitor-network review before approval.

Сравнение с аналогами

Параметр Этот товар
Brand Analog Devices
Package 18-pin PDIP, 0.300 in (7.62 mm) pitch
Product Type Dual RS-232 transceiver
Number of Transmitters 2 transmitters
Number of Receivers 2 receivers
Maximum Data Rate 460 kbps
Supply Voltage 3.3 V
Charge-Pump Capacitors 4 external capacitors at 0.1 µF each
Power Control Enable and shutdown functions
Interface Standards EIA-232E and CCITT V.28

Ключевые отличия

  • Provides dedicated interface shutdown control (против ADM3202)
  • Supports high-speed serial operation (против ADM3222ARWZ)
  • Combines two complete RS-232 channels (против ADM1385)

Заметки по проектированию

Place all four 0.1 µF charge-pump capacitors close to their associated ADM3222AN pins. Keep each capacitor loop compact, connect the capacitor ground return as shown in the Analog Devices application circuit, and avoid routing sensitive signals beneath the charge-pump nodes. Short connections reduce switching transients and help preserve predictable RS-232 driver performance.

Do not treat ADM3222ARWZ as a PCB-level substitute for ADM3222AN: the former uses an 18-lead SOIC package, while the latter uses an 18-pin PDIP package. A new board can evaluate either package, but an existing PDIP footprint cannot accept the surface-mount option without layout changes. Verify every pin name, enable polarity, shutdown state, and capacitor connection against the selected ordering code's datasheet.

Keep RS-232 driver traces short and route them away from clock, reset, and low-level analog signals. Connect the transceiver ground and external connector shield according to the equipment's grounding strategy. Because the device uses an on-chip charge pump, decoupling and charge-pump layout are central to conducted and radiated-noise control; avoid extending the high-current capacitor loops across the PCB.

Use the enable and shutdown functions to disable the interface when it is not required, especially in portable equipment. Confirm the actual supply current in each operating mode and size the 3.3 V rail for both the interface and its attached UART. The ADM3222AN generates bipolar driver voltages internally, so the system does not need a negative supply, but external cable protection may still require suitable biasing.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The ADM3222AN is an industrial interface IC, but no explicit RoHS, REACH, halogen-free, lead-free, or conflict-minerals declaration is identified. IEC 1000-4-2 ESD protection is documented as an electrical feature and does not establish automotive qualification.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ADM3222AN datasheet ADM3222AN datasheet pdf ADM3222AN pinout ADM3222AN specifications Analog Devices ADM3222AN ADM3222AN 460 kbps ADM3222AN PDIP-18 ADM3222AN 3.3 V ADM3222AN RS-232 transceiver ADM3222AN industrial interface ADM3222AN equivalent ADM3222AN replacement ADM3222AN price ADM3222AN stock ADM3222AN vs ADM3222ARWZ

Связанные компоненты & термины

Analog Devices ADM3222AN ADM3222ARWZ ADM3202 ADM1385 RS-232 EIA-232E CCITT V.28 RS-232 transceiver serial interface IC interface IC semiconductor charge-pump capacitor 0.1 µF capacitor 460 kbps 3.3 V supply enable pin shutdown function IEC 1000-4-2 ESD protection PDIP-18 through-hole mounting UART battery-powered portable equipment
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ