ADM3222AN - 460 kbps Dual RS-232 Transceiver | Analog Devices
부품 번호: ADM3222AN ✓ 활성ADM3222AN 개요
An RS-232 transceiver is an interface IC that converts between digital logic levels and the voltage levels used by RS-232 serial links. It belongs to the broader communications-interface hierarchy: RS-232 transceiver → serial-interface IC → interface IC → semiconductor. Such devices bridge UART, UART-over-RS-232, or legacy peripheral ports to cables and equipment using balanced differential signaling.
Key features include operation at 460 kbps, compliance with EIA-232E and CCITT V.28 specifications, a 3.3 V single-supply architecture, and ESD protection specified to IEC 1000-4-2. The ADM3222 adds enable and shutdown circuitry for systems where the interface must be placed into a low-consumption state. Its two transmitters and two receivers make it suitable for consolidating two serial channels onto one device.
The on-chip charge-pump circuit uses four external 0.1 µF capacitors to develop positive and negative voltage rails for the RS-232 drivers. This architecture permits operation without a dual supply and reduces system complexity. EIA-232E and CCITT V.28 conformance support interoperability with conventional RS-232 equipment, while the 460 kbps maximum data rate provides more bandwidth than the slower legacy communication rates commonly associated with older RS-232 ports.
Typical applications include industrial serial-port expansion, instrumentation interfaces, point-of-sale equipment, data acquisition systems, and legacy peripheral connections that must be retained alongside newer low-voltage digital circuitry. The enable and shutdown controls are particularly useful in battery-powered portable instruments where inactive interface current matters.
Circuit implementation requires careful capacitor placement near the charge-pump pins, short RS-232 traces, and protection appropriate to the cable environment. Confirm that the host logic levels and selected UART baud rate are compatible with the 3.3 V interface and 460 kbps device capability.
This page consolidates interface specifications, application guidance, design considerations, and practical sourcing information for engineers evaluating the ADM3222AN in compact RS-232 implementations.
드롭인 대체품: ADM3222AN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADM3222AN (동일 폼 팩터 및 풋프린트) — 차이점: Interface Standard, Maximum Data Rate, Mounting Type, Package.
LTC1385CN
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3222CPE
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3232CPE+
✅ 드롭인가격 문의
데이터시트 보기 →MAX3222EPE
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3232EPE
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADM3222AN 사양
| Product Type | Dual RS-232 transceiver |
| Channel Count | 2 channels |
| Transmitter Count | 2 transmitters |
| Receiver Count | 2 receivers |
| Maximum Data Rate | 460 kbps |
| 공급 전압 | 3.3 V |
| Interface Standard | EIA-232E and CCITT V.28 |
| Charge-Pump Capacitor | 0.1 µF each; 4 capacitors required |
| Power Control | Enable and shutdown functions |
| ESD Protection Standard | IEC 1000-4-2 |
| 패키지 | 18-pin PDIP, 0.300 in (7.62 mm) pitch |
| 실장 유형 | Through-hole mounting |
| Supply Configuration | Single supply |
ADM3222AN 18-pin pdip, 0.300 in (7.62 mm) pitch 핀 구성 가이드
ADM3222AN(18-pin pdip, 0.300 in (7.62 mm) pitch 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ADM3222AN.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADM3222AN 적합 용도: 6 애플리케이션s: Industrial Serial-Port Expansion, Portable Test and Measurement Equipment, Data Acquisition System Interface, Point-of-Sale Terminal Connectivity, Legacy Peripheral Communication, Battery-Powered Field Instrument.
Industrial Serial-Port Expansion
The ADM3222AN is appropriate for industrial equipment that must retain two legacy RS-232 ports while using a 3.3 V digital control system. Its two transmitters and two receivers support two bidirectional links, while the 460 kbps capability accommodates faster serial configurations than older low-speed ports. EIA-232E and CCITT V.28 operation align it with conventional RS-232 equipment. The enable and shutdown pins also let the controller isolate the interface during idle periods, and the 18-pin PDIP format simplifies assembly in through-hole industrial hardware. Place the four 0.1 µF charge-pump capacitors close to the device and protect the external connector according to the cable and installation environment.
추천
Portable Test and Measurement Equipment
The ADM3222AN fits portable instruments that communicate through legacy RS-232 ports while operating from a low-voltage system. Its single 3.3 V supply eliminates the need for a separate negative RS-232 supply, and the shutdown facility can reduce consumption when no measurement session is active. The 460 kbps maximum rate provides useful throughput for transferring results, commands, or configuration data. Enable control can also support controlled startup sequencing between the instrument logic and attached serial equipment. In a handheld design, keep the charge-pump network compact, route the RS-232 signals away from sensitive analog sections, and confirm connector ground and cable-routing requirements for reliable field operation.
추천
Data Acquisition System Interface
The ADM3222AN can provide two communication paths between a data-acquisition controller and external laboratory or process equipment. Two transmitters and two receivers allow command and measurement channels to be implemented with one interface IC, while operation from a single 3.3 V rail simplifies interface power planning. The EIA-232E and CCITT V.28 specifications establish compatibility with conventional serial equipment. A maximum rate of 460 kbps supports efficient command polling and data transfer when both endpoints support that speed. Designers should maintain short charge-pump capacitor connections, observe the datasheet ground arrangement, and place appropriate protection at externally accessible RS-232 connectors where cables leave the enclosure.
추천
Point-of-Sale Terminal Connectivity
The ADM3222AN suits point-of-sale terminals, scanners, scales, and related peripherals that retain RS-232 communication links. A single 3.3 V supply reduces power-conversion complexity, while the dual-channel arrangement can serve separate peripherals or provide one channel for status and another for transaction data. The device's 460 kbps capability provides more performance margin than many legacy peripherals require. Use the enable input to coordinate peripheral startup, and use shutdown when the terminal enters a low-power state. The PDIP package suits larger through-hole assemblies, while shorter cable connections and correctly placed charge-pump capacitors will help reduce signal-integrity and EMI problems in retail equipment.
추천
Legacy Peripheral Communication
The ADM3222AN provides a practical bridge between a modern 3.3 V controller and legacy RS-232 peripherals. Both channels can support bidirectional communication, allowing the controller to exchange commands and receive status or measurements without adding separate driver and receiver ICs. Its EIA-232E and CCITT V.28 conformance supports conventional RS-232 interoperability, and the single-supply charge-pump architecture simplifies board-level integration. For reliable implementation, confirm logic thresholds, select the UART baud rate below the 460 kbps limit, and verify the complete pin configuration in the manufacturer datasheet. External protection and grounding should be considered wherever the attached cable crosses an electrostatic-discharge or noise boundary.
추천
Battery-Powered Field Instrument
The ADM3222AN is appropriate for battery-powered field instruments that need a low-voltage RS-232 link to a host computer or accessory. Operating from one 3.3 V rail eliminates a separate negative interface supply, and the shutdown and enable functions allow the system to control interface power according to operating state. The device supports data rates up to 460 kbps for transferring measurement records or commands. For an energy-sensitive implementation, verify actual supply and shutdown current against the final system duty cycle rather than relying only on the maximum data-rate specification. Keep the charge-pump capacitors close to their pins, isolate the cable path from sensitive analog circuitry, and use connector-level protection appropriate for field cables.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADM3222AN — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | Analog Devices |
| Package | 18-pin PDIP, 0.300 in (7.62 mm) pitch |
| Product Type | Dual RS-232 transceiver |
| Number of Transmitters | 2 transmitters |
| Number of Receivers | 2 receivers |
| Maximum Data Rate | 460 kbps |
| Supply Voltage | 3.3 V |
| Charge-Pump Capacitors | 4 external capacitors at 0.1 µF each |
| Power Control | Enable and shutdown functions |
| Interface Standards | EIA-232E and CCITT V.28 |
주요 차별점
- Provides dedicated interface shutdown control (vs ADM3202)
- Supports high-speed serial operation (vs ADM3222ARWZ)
- Combines two complete RS-232 channels (vs ADM1385)
설계 노트
Place all four 0.1 µF charge-pump capacitors close to their associated ADM3222AN pins. Keep each capacitor loop compact, connect the capacitor ground return as shown in the Analog Devices application circuit, and avoid routing sensitive signals beneath the charge-pump nodes. Short connections reduce switching transients and help preserve predictable RS-232 driver performance.
Do not treat ADM3222ARWZ as a PCB-level substitute for ADM3222AN: the former uses an 18-lead SOIC package, while the latter uses an 18-pin PDIP package. A new board can evaluate either package, but an existing PDIP footprint cannot accept the surface-mount option without layout changes. Verify every pin name, enable polarity, shutdown state, and capacitor connection against the selected ordering code's datasheet.
Keep RS-232 driver traces short and route them away from clock, reset, and low-level analog signals. Connect the transceiver ground and external connector shield according to the equipment's grounding strategy. Because the device uses an on-chip charge pump, decoupling and charge-pump layout are central to conducted and radiated-noise control; avoid extending the high-current capacitor loops across the PCB.
Use the enable and shutdown functions to disable the interface when it is not required, especially in portable equipment. Confirm the actual supply current in each operating mode and size the 3.3 V rail for both the interface and its attached UART. The ADM3222AN generates bipolar driver voltages internally, so the system does not need a negative supply, but external cable protection may still require suitable biasing.
규정 준수 정보
The ADM3222AN is an industrial interface IC, but no explicit RoHS, REACH, halogen-free, lead-free, or conflict-minerals declaration is identified. IEC 1000-4-2 ESD protection is documented as an electrical feature and does not establish automotive qualification.