ADS131E08SPAGR - 8-Ch 24-Bit 64-kSPS Delta-Sigma ADC | TI
Артикул: ADS131E08SPAGR ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.3 | $113,00 |
| 100 | $10.1 | $1.010,00 |
| 500 | $9.2 | $4.600,00 |
| 1.000 | $8.4 | $8.400,00 |
ADS131E08SPAGR Обзор
An analog front-end (AFE) is a circuit block that conditions and digitizes analog signals before digital processing. Within the signal-chain hierarchy (delta-sigma ADC -> analog front-end -> data acquisition system -> signal chain), the ADS131E08S is a complete AFE that integrates eight delta-sigma converters, programmable gain amplifiers (PGAs), an internal voltage reference, and an internal oscillator in a single IC, drastically reducing the component count of multi-channel data acquisition systems.
Key features include 24-bit resolution across eight simultaneous channels, a 64 kSPS maximum sample rate, differential or pseudo-differential inputs, an SPI serial interface, and a fast power-up/start-up time. Simultaneous sampling is essential for power monitoring because phase relationships between voltage and current channels must be preserved for accurate power calculations.
Architecturally, each channel uses a delta-sigma modulator with an internal digital decimation filter, providing noise shaping and high resolution at moderate bandwidth. The fast start-up specification enables quick power-on to valid conversion data, which is critical for protection relays that must detect and respond to faults within milliseconds. The integrated PGA allows direct connection of sensors with varying output levels without external amplification.
Typical applications include grid protection relays, power quality analyzers, energy metering, and industrial motor monitoring, where eight synchronized channels capture three-phase voltage and current waveforms. The 1.8V digital / 5V analog supply configuration fits standard industrial rails.
Design consideration: decouple the analog and digital supplies independently and maintain a single, quiet ground plane; isolate the SPI bus when it crosses to noisy digital domains to preserve the specified noise floor. Price data as of 2026-08-30.
Аналоги без доработки для ADS131E08SPAGR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ADS131E08IPAGR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ADS131E06SPAGR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ADS131E04SPAGR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ADS131E08SPAGR Максимальные параметры и электрические характеристики
| Разрешение | 24 bit |
| Каналы | 8 (simultaneous sampling) |
| Maximum Sample Rate | 64 kSPS |
| ADC Architecture | Delta-Sigma |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 1.8 V |
| Power Consumption | 17.6 mW |
| Input Type | Differential / Pseudo-Differential |
| PGA | Integrated programmable gain amplifier |
| Internal Reference | Yes |
| Интерфейс | SPI |
| Start-Up | Fast power-up time |
| Рабочая температура | -40C to +105C |
| Корпус | 64-TQFP (PAG), 10x10 mm |
| Тип монтажа | Surface Mount |
| Application | Monitoring and protection (power monitoring) |
Конфигурация выводов ADS131E08SPAGR
| Контакт 1 | CH0_INP — Channel 0 differential positive input [DATA_NEEDED: confirm exact pin assignment] |
| Контакт [DATA_NEEDED] | CH0_INN — Channel 0 differential negative input |
| Контакт [DATA_NEEDED] | AVDD — 5V analog supply |
| Контакт [DATA_NEEDED] | DVDD — 1.8V digital supply |
| Контакт [DATA_NEEDED] | AVSS — Analog ground / negative supply |
| Контакт [DATA_NEEDED] | DGND — Digital ground |
| Контакт [DATA_NEEDED] | SCLK — SPI serial clock input |
| Контакт [DATA_NEEDED] | DIN — SPI data input |
| Контакт [DATA_NEEDED] | DOUT — SPI data output |
| Контакт [DATA_NEEDED] | DRDY — Data ready indicator |
| Контакт [DATA_NEEDED] | CS — SPI chip select |
| Контакт [DATA_NEEDED] | VREF — Reference voltage / internal reference output |
Типичное применение
ADS131E08SPAGR подходит для 6 применениеs: Grid Protection Relays, Power Quality Analyzers, Energy Metering, Industrial Motor Monitoring, Multi-Channel Data Acquisition (DAQ), Battery Management System Sensing.
Grid Protection Relays
Protection relays must detect overcurrent, overvoltage, and frequency events within milliseconds. The ADS131E08SPAGR fits because its fast start-up delivers valid conversion data quickly after power-up, and its eight simultaneous 24-bit channels preserve phase alignment between current and voltage inputs - mandatory for impedance and direction calculations. Sampling at 64 kSPS gives ample oversampling for 50/60 Hz fundamental extraction plus harmonics. The integrated PGA allows direct CT/PT input conditioning without external amplifiers, reducing board area and calibration effort.
Рекомендуется
Power Quality Analyzers
Power quality instruments capture voltage and current waveforms on all phases simultaneously to compute THD, sags, swells, and unbalance. The ADS131E08SPAGR's eight simultaneous channels cover three phases plus neutral voltage and current in one device, while the 24-bit resolution and 64-kSPS rate support harmonic analysis up to the 63rd order. Its 17.6 mW consumption suits portable analyzers, and the internal reference keeps channel-to-channel gain matching tight for accurate per-phase power and energy computations.
Рекомендуется
Energy Metering
Three-phase smart meters require synchronized sampling of phase voltages and currents for accurate active and reactive energy calculation. The ADS131E08SPAGR provides phase-coherent 24-bit data that eliminates skew errors inherent in multiplexed ADCs, supporting metering-class accuracy. The 5V/1.8V supply scheme matches industrial meter power rails, and the integrated reference reduces the calibration burden across the eight channels. Low 17.6 mW power draw helps meet idle-consumption regulations in always-on meters.
Рекомендуется
Industrial Motor Monitoring
Condition monitoring of industrial motors digitizes three-phase current and voltage plus vibration and temperature sensor channels. The ADS131E08SPAGR's simultaneous sampling correlates electrical signatures (for MCSA analysis) with mechanical sensor data, and the PGA accommodates sensors with different output amplitudes without external gain stages. Its 64-kSPS rate captures both fundamental components and higher-frequency fault signatures, while SPI output integrates directly with factory automation controllers.
Рекомендуется
Multi-Channel Data Acquisition (DAQ)
Industrial DAQ systems benefit from the ADS131E08SPAGR's integration: eight 24-bit delta-sigma converters, PGAs, reference, and oscillator in one 10x10 mm TQFP replaces dozens of discrete components. Simultaneous sampling avoids the inter-channel skew of multiplexed front ends, important when correlating channels in time. The SPI interface with DRDY handshake simplifies firmware, and the fast start-up supports duty-cycled acquisition that extends battery life in remote monitoring nodes.
Рекомендуется
Battery Management System Sensing
BMS applications sense cell voltages and pack current with high resolution for accurate state-of-charge estimation. The ADS131E08SPAGR's 24-bit resolution and integrated PGA allow measurement of small cell voltage differentials, and its low 17.6 mW consumption limits self-discharge impact on monitored packs. Isolation is typically required between the analog front end and system controller - pair with isolated digital isolators on the SPI bus to meet high-voltage stack requirements.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADS131E08SPAGR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADS131E08IPAGR | ADS131E06SPAGR | ADS131E04SPAGR |
|---|---|---|---|---|
| Package | 64-TQFP (PAG) 10x10 mm | 64-TQFP (PAG) - same | 64-TQFP (PAG) - same | 64-TQFP (PAG) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Channels | 8 simultaneous | 8 simultaneous | 6 simultaneous | 4 simultaneous |
| Max Sample Rate | 64 kSPS | 64 kSPS | 64 kSPS | 64 kSPS |
| Integrated PGA | Yes | Yes | Yes | Yes |
| Interface | SPI | SPI | SPI | SPI |
Ключевые отличия
- Full 8 simultaneous channels in one AFE (против ADS131E06SPAGR)
- Fast start-up for protection (против ADS131E08 (non-S))
- Integrated PGA and reference (против ADS131E04SPAGR)
Заметки по проектированию
Decouple the 5V analog and 1.8V digital supplies independently with 100 nF ceramic capacitors placed within 2 mm of each supply pin, plus bulk 10 uF capacitance per rail. Maintain a single, unbroken ground plane; do not split analog and digital grounds under the ADC. Route differential input pairs as matched-length traces away from the SPI clock to preserve the 24-bit noise floor.
The SPI bus crossing from a noisy digital domain can inject errors into conversion data. Use digital isolators (e.g., ISO77xx family) when the host MCU shares a different ground domain, and add series termination (22-33 ohm) on SCLK to control ringing. Keep DRDY lines short and monitor timing against the datasheet SPI frame requirements.
Do not exceed the datasheet absolute maximum ratings on the analog inputs - the integrated PGA front end is sensitive to overvoltage; add external clamping for field-wired protection-relay inputs. Verify the start-up sequence requirements in the datasheet register map before assuming default configurations, and allow the internal reference to settle before the first conversions are trusted.
Информация о соответствии
Compliance data not present in provided web data; confirm RoHS/REACH status on TI product page.
