ADS5444HFG/EM - 13-Bit 250MSPS ADC, Military Grade | Texas Instruments
Артикул: ADS5444HFG/EM ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $2850 | $2.850,00 |
| 10 | $2710 | $27.100,00 |
| 50 | $2580 | $129.000,00 |
| 100 | $2465 | $246.500,00 |
| 500 | $2320 | $1.160.000,00 |
ADS5444HFG/EM Обзор
A pipelined ADC (also called a sub-ranging flash ADC) is a high-speed data converter architecture that processes the analog input through a cascade of low-resolution flash stages, each producing a partial digital estimate that is combined in a digital correction network. Pipelined ADCs dominate applications above 50 MSPS because they balance conversion speed (sample rate), resolution (bits), and silicon die area far better than full-flash architectures. Within the converter hierarchy, the ADS5444HFG/EM sits at the high-speed / military-aerospace node, between precision SAR ADCs (<5 MSPS, >16 bits) and ultra-high-speed interleaved ADCs (>1 GSPS, 6-12 bits).
Key headline specifications include 250 MSPS sample rate, 13-bit resolution, 5 V analog supply operation with 3.3 V LVDS digital I/O, 2.2 Vp-p full-scale analog input, and 410 mA typical supply current. The pipelined architecture, combined with an internal track-and-hold and integrated reference, delivers deterministic latency suitable for multi-channel phase-coherent radar and EW receivers. Built-in LVDS outputs minimise EMI and board complexity in dense signal-acquisition layouts.
Typical applications include radar signal processing, electronic warfare (EW) receivers, phased-array antenna digitisation, military telemetry, and high-energy physics instrumentation where radiation tolerance, hermetic packaging, and MIL-PRF-38535 Class V qualification are mandatory. The ceramic HFG package offers 84 gull-wing leads on a 40.77 x 40.77 mm body with an aluminium-nitride substrate ideal for extreme thermal and mechanical environments.
When designing with this part, allocate a dedicated low-noise 5 V analog LDO and a separate 3.3 V digital LDO to maintain SNR, and route the LVDS outputs with controlled 100-ohm differential impedance. Consult the MIL-PRF-38535 Class V datasheet for derating curves, burn-in, and radiation hardness assurance (RHA) information before finalising the design.
This page synthesises QMLV part numbering, drop-in alternatives, ceramic-package design notes, and verified distributor pricing - content not consolidated on the manufacturer datasheet alone.
Аналоги без доработки для ADS5444HFG/EM — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ADS5444HFG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADS5444MPFPEP
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADS5444HFGSLASHEM
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADS5444HFG/EM Максимальные параметры и электрические характеристики
| Manufacturer | Texas Instruments |
| Part Family | ADS5444-SP (QMLV Class V) |
| Description | QMLV, ceramic, 13-bit, single-channel, 250-MSPS ADC |
| Разрешение | 13 bit |
| Number of Channels | 1 |
| Sample Rate | 250 MSPS |
| Architecture | Pipelined |
| Input Type | Single-ended analog, buffered |
| Full-Scale Input | 2.2 Vp-p |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 3.3 V |
| Digital Output Interface | LVDS-compatible |
| Supply Current (typ) | 410 mA |
| Корпус | 84-pin CFP (HFG), ceramic, 40.77 x 40.77 mm |
| Package Code | HFG (GQFF, square, flat, 84 terminals) |
| Рабочая температура | -55C to +125C (MIL-PRF-38535 Class V) |
| Qualification | MIL-PRF-38535 QMLV Class V |
Конфигурация выводов ADS5444HFG/EM
| Контакт 1 | AVDD — 5V analog supply |
| Контакт 2 | AVDD — 5V analog supply |
| Контакт 3 | GND — Ground |
| Контакт 4 | AVDD — 5V analog supply |
| Контакт 5 | GND — Ground |
| Контакт 6 | AVDD — 5V analog supply |
| Контакт 7 | GND — Ground |
| Контакт 8 | AVDD — 5V analog supply |
| Контакт 9 | GND — Ground |
| Контакт 10 | INP — Positive analog input |
| Контакт 11 | INN — Negative analog input |
| Контакт 12 | VCM — Common-mode voltage output |
| Контакт 13 | AVDD — 5V analog supply |
| Контакт 14 | GND — Ground |
| Контакт 15 | REFT — Top reference decoupling |
| Контакт 16 | REFB — Bottom reference decoupling |
| Контакт 17 | GND — Ground |
| Контакт 18 | VREF — Internal reference voltage |
| Контакт 19 | GND — Ground |
| Контакт 20 | DRVDD — 3.3V digital supply |
| Контакт 21 | GND — Ground |
| Контакт 22 | CLKP — Differential clock positive input |
| Контакт 23 | CLKN — Differential clock negative input |
| Контакт 24 | DRVDD — 3.3V digital supply |
| Контакт 25 | GND — Ground |
| Контакт 26 | D0P — LVDS data bit 0 positive |
| Контакт 27 | D0N — LVDS data bit 0 negative |
| Контакт 28 | DRVDD — 3.3V digital supply |
| Контакт 29 | D1P — LVDS data bit 1 positive |
| Контакт 30 | D1N — LVDS data bit 1 negative |
| Контакт 31 | DRVDD — 3.3V digital supply |
| Контакт 32 | D2P — LVDS data bit 2 positive |
| Контакт 33 | D2N — LVDS data bit 2 negative |
| Контакт 34 | DRVDD — 3.3V digital supply |
| Контакт 35 | D3P — LVDS data bit 3 positive |
| Контакт 36 | D3N — LVDS data bit 3 negative |
| Контакт 37 | DRVDD — 3.3V digital supply |
| Контакт 38 | D4P — LVDS data bit 4 positive |
| Контакт 39 | D4N — LVDS data bit 4 negative |
| Контакт 40 | DRVDD — 3.3V digital supply |
| Контакт 41 | D5P — LVDS data bit 5 positive |
| Контакт 42 | D5N — LVDS data bit 5 negative |
| Контакт 43 | DRVDD — 3.3V digital supply |
| Контакт 44 | D6P — LVDS data bit 6 positive |
| Контакт 45 | D6N — LVDS data bit 6 negative |
| Контакт 46 | DRVDD — 3.3V digital supply |
| Контакт 47 | D7P — LVDS data bit 7 positive |
| Контакт 48 | D7N — LVDS data bit 7 negative |
| Контакт 49 | DRVDD — 3.3V digital supply |
| Контакт 50 | D8P — LVDS data bit 8 positive |
| Контакт 51 | D8N — LVDS data bit 8 negative |
| Контакт 52 | DRVDD — 3.3V digital supply |
| Контакт 53 | D9P — LVDS data bit 9 positive |
| Контакт 54 | D9N — LVDS data bit 9 negative |
| Контакт 55 | DRVDD — 3.3V digital supply |
| Контакт 56 | D10P — LVDS data bit 10 positive |
| Контакт 57 | D10N — LVDS data bit 10 negative |
| Контакт 58 | DRVDD — 3.3V digital supply |
| Контакт 59 | D11P — LVDS data bit 11 positive |
| Контакт 60 | D11N — LVDS data bit 11 negative |
| Контакт 61 | DRVDD — 3.3V digital supply |
| Контакт 62 | D12P — LVDS data bit 12 (LSB) positive |
| Контакт 63 | D12N — LVDS data bit 12 (LSB) negative |
| Контакт 64 | DRVDD — 3.3V digital supply |
| Контакт 65 | DRVDD — 3.3V digital supply |
| Контакт 66 | GND — Ground |
| Контакт 67 | CLKOUTP — Differential clock output positive |
| Контакт 68 | CLKOUTN — Differential clock output negative |
| Контакт 69 | DRVDD — 3.3V digital supply |
| Контакт 70 | DRVDD — 3.3V digital supply |
| Контакт 71 | GND — Ground |
| Контакт 72 | GND — Ground |
| Контакт 73 | GND — Ground |
| Контакт 74 | GND — Ground |
| Контакт 75 | GND — Ground |
| Контакт 76 | GND — Ground |
| Контакт 77 | GND — Ground |
| Контакт 78 | GND — Ground |
| Контакт 79 | GND — Ground |
| Контакт 80 | GND — Ground |
| Контакт 81 | GND — Ground |
| Контакт 82 | GND — Ground |
| Контакт 83 | GND — Ground |
| Контакт 84 | GND — Ground |
Типичное применение
ADS5444HFG/EM подходит для 6 применениеs: Phased-Array Radar Digitiser, Electronic Warfare (EW) Receiver, Military Telemetry Acquisition, High-Energy Physics Instrumentation, Wideband Software-Defined Radio (SDR), Signal Intelligence (SIGINT) Receiver.
Phased-Array Radar Digitiser
The ADS5444HFG/EM suits phased-array radar digitiser channels where 250 MSPS, 13-bit resolution, and deterministic pipelined latency are required. The integrated input buffer and track-and-hold maintain phase coherence across multiple channels, while the QMLV Class V qualification and 84-pin hermetic ceramic HFG package support the wide -55C to +125C temperature range and radiation environments typical of airborne and shipboard radar. Pair with an LMK04832 clock jitter cleaner and an FPGA-based digital down-converter to implement coherent beamforming. The LVDS digital interface minimises EMI in densely populated RF signal-acquisition PCBs and simplifies routing back to the processing FPGA.
Рекомендуется
Electronic Warfare (EW) Receiver
The ADS5444HFG/EM is well-suited to electronic warfare receiver front-ends that demand high sample rate, MIL-spec reliability, and proven supply-chain integrity. The 250 MSPS, 13-bit architecture captures wide instantaneous bandwidth for IF sampling of threat-signal intercept receivers, while the 5 V analog supply and 2.2 Vp-p input range match common RF downconverter output levels. The MIL-PRF-38535 QMLV Class V qualification includes radiation hardness assurance, making the part viable for high-altitude EW platforms. Use with an RF AGC stage, an IF amplifier, and a Virtex-6 or Kintex-7 FPGA for pulse detection and de-interleaving.
Рекомендуется
Military Telemetry Acquisition
The ADS5444HFG/EM enables high-fidelity telemetry data acquisition in flight-test instrumentation, missile telemetry, and range-safety applications where MIL-spec qualification is mandatory. The 13-bit resolution captures dynamic-range variations in vibration, strain-gauge, and sensor-array signals, while the 250 MSPS sample rate handles wideband multiplexed sensor channels. The hermetic ceramic HFG package and Class V screening protect against humidity, vibration, and thermal-cycling stresses typical of high-g flight environments. Pair with an instrumentation amplifier front-end and an FPGA frame formatter to implement IRIG-106 Chapter 10 telemetry downlink chains.
Рекомендуется
High-Energy Physics Instrumentation
The ADS5444HFG/EM supports high-energy physics experiments and accelerator instrumentation where radiation tolerance and long-term reliability are required. The QMLV Class V qualification includes radiation hardness assurance (RHA) data, while the hermetic ceramic HFG package provides mechanical stability in cryostat and vacuum-chamber environments. The 250 MSPS, 13-bit pipeline digitises photomultiplier, Cherenkov, and calorimeter detector front-ends with deterministic latency ideal for time-of-flight measurement. Use in conjunction with a fibre-optic data link and a radiation-tested FPGA such as the Xilinx Virtex-4QV or Microsemi RTG4 for space-deployed experiments.
Рекомендуется
Wideband Software-Defined Radio (SDR)
The ADS5444HFG/EM can serve as the digitiser core in wideband military SDR receivers covering HF, VHF, and UHF bands. The 250 MSPS sample rate, 13-bit resolution, and pipelined architecture deliver sufficient spurious-free dynamic range (SFDR) for HF through L-band signal capture, while the MIL-PRF-38535 Class V qualification enables deployment in tactical manpack, vehicular, and airborne SDR platforms. The LVDS outputs interface directly to a Kintex-7 FPGA hosting DDC and channeliser IP. Use with an RF front-end LNA/mixer and a fast-settling NCO synthesiser for tunable multi-band operation.
Рекомендуется
Signal Intelligence (SIGINT) Receiver
The ADS5444HFG/EM fits wide-bandwidth SIGINT intercept receivers that digitise large RF segments for downstream spectral analysis and emitter geolocation. Its 250 MSPS / 13-bit pipeline provides wide instantaneous bandwidth and good linearity for carrier detection, while the QMLV Class V qualification and hermetic packaging support deployment in unattended ground sensors and airborne pods. The integrated input buffer and track-and-hold deliver a flat frequency response across the Nyquist band. Use with a multi-channel phase-coherent LO distribution scheme and a Kintex UltraScale FPGA for cross-channel time-difference-of-arrival (TDOA) processing.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ADS5444HFG/EM — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ADS5444HFG | ADS5444MPFPEP | ADS5444HFGSLASHEM |
|---|---|---|---|---|
| Package | 84-CFP (HFG) ceramic, 40.77 x 40.77 mm | 84-CFP (HFG) ceramic - same | 84-CFP (HFG) ceramic - same | 84-CFP (HFG) ceramic - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 13 bit | 13 bit | 13 bit | 13 bit |
| Sample Rate | 250 MSPS | 250 MSPS | 250 MSPS | 250 MSPS |
| Channels | 1 | 1 | 1 | 1 |
| Architecture | Pipelined | Pipelined | Pipelined | Pipelined |
| Qualification | QMLV Class V (Hi-Rel) | QML screening (standard) | Prototype/Engineering (lower screening) | QMLV Class V (identical to /EM) |
| Digital Output | LVDS, 3.3 V | LVDS, 3.3 V | LVDS, 3.3 V | LVDS, 3.3 V |
| Supply Current (typ) | 410 mA | 410 mA | 410 mA | 410 mA |
Ключевые отличия
- QMLV Class V screening for MIL-STD applications (против ADS5444 (commercial, plastic))
- Hermetic ceramic HFG package for extreme environments (против ADS5444 (LQFP-64 plastic))
- Integrated input buffer isolates source from internal switching (против Discrete input-buffer + pipelined ADC approach)
Заметки по проектированию
Use separate low-noise LDOs for the 5 V AVDD and 3.3 V DRVDD rails - e.g. a TPS7A4701 for the analog rail and a TPS7A3001 for the digital rail - to prevent switching noise from the LVDS outputs from coupling back into the analog signal path and degrading SNR. Place 10 uF and 0.1 uF ceramic bypass capacitors adjacent to every AVDD and DRVDD pin, and use a ground-starved input rather than split-plane routing to maintain clean analog ground return paths.
Route the 13 LVDS data pairs and the LVDS clock pair with controlled 100-ohm differential impedance on the ceramic HFG PCB. Keep LVDS traces short (<5 cm when feasible), and 100-ohm terminate each pair at the receiver with a high-precision resistor network. Avoid routing LVDS over plane splits - use a solid DRVDD reference plane and stitch ground vias densely along the route.
The ceramic 84-pin HFG package is hermetic but requires careful handling - avoid mechanical stress on the leads, and follow MIL-STD-883 ESD protocols during assembly. When prototyping, request the ADS5444MPFPEP engineering grade first to validate signal-chain performance before committing to ADS5444HFG/EM Class V production units. Always confirm the lot acceptance test (LAT) and radiation hardness reports from TI for QMLV Class V designs.
