ADS5444HFG/EM - 13-Bit 250MSPS ADC, Military Grade | Texas Instruments
Teilenummer: ADS5444HFG/EM ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $2850 | $2.850,00 |
| 10 | $2710 | $27.100,00 |
| 50 | $2580 | $129.000,00 |
| 100 | $2465 | $246.500,00 |
| 500 | $2320 | $1.160.000,00 |
ADS5444HFG/EM Übersicht
A pipelined ADC (also called a sub-ranging flash ADC) is a high-speed data converter architecture that processes the analog input through a cascade of low-resolution flash stages, each producing a partial digital estimate that is combined in a digital correction network. Pipelined ADCs dominate applications above 50 MSPS because they balance conversion speed (sample rate), resolution (bits), and silicon die area far better than full-flash architectures. Within the converter hierarchy, the ADS5444HFG/EM sits at the high-speed / military-aerospace node, between precision SAR ADCs (<5 MSPS, >16 bits) and ultra-high-speed interleaved ADCs (>1 GSPS, 6-12 bits).
Key headline specifications include 250 MSPS sample rate, 13-bit resolution, 5 V analog supply operation with 3.3 V LVDS digital I/O, 2.2 Vp-p full-scale analog input, and 410 mA typical supply current. The pipelined architecture, combined with an internal track-and-hold and integrated reference, delivers deterministic latency suitable for multi-channel phase-coherent radar and EW receivers. Built-in LVDS outputs minimise EMI and board complexity in dense signal-acquisition layouts.
Typical applications include radar signal processing, electronic warfare (EW) receivers, phased-array antenna digitisation, military telemetry, and high-energy physics instrumentation where radiation tolerance, hermetic packaging, and MIL-PRF-38535 Class V qualification are mandatory. The ceramic HFG package offers 84 gull-wing leads on a 40.77 x 40.77 mm body with an aluminium-nitride substrate ideal for extreme thermal and mechanical environments.
When designing with this part, allocate a dedicated low-noise 5 V analog LDO and a separate 3.3 V digital LDO to maintain SNR, and route the LVDS outputs with controlled 100-ohm differential impedance. Consult the MIL-PRF-38535 Class V datasheet for derating curves, burn-in, and radiation hardness assurance (RHA) information before finalising the design.
This page synthesises QMLV part numbering, drop-in alternatives, ceramic-package design notes, and verified distributor pricing - content not consolidated on the manufacturer datasheet alone.
Drop-in-Alternativen für ADS5444HFG/EM – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ADS5444HFG
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADS5444MPFPEP
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADS5444HFGSLASHEM
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADS5444HFG/EM Grenzwerte & elektrische Eigenschaften
| Manufacturer | Texas Instruments |
| Part Family | ADS5444-SP (QMLV Class V) |
| Description | QMLV, ceramic, 13-bit, single-channel, 250-MSPS ADC |
| Auflösung | 13 bit |
| Number of Channels | 1 |
| Sample Rate | 250 MSPS |
| Architecture | Pipelined |
| Input Type | Single-ended analog, buffered |
| Full-Scale Input | 2.2 Vp-p |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 3.3 V |
| Digital Output Interface | LVDS-compatible |
| Supply Current (typ) | 410 mA |
| Gehäuse | 84-pin CFP (HFG), ceramic, 40.77 x 40.77 mm |
| Package Code | HFG (GQFF, square, flat, 84 terminals) |
| Betriebstemperatur | -55C to +125C (MIL-PRF-38535 Class V) |
| Qualification | MIL-PRF-38535 QMLV Class V |
ADS5444HFG/EM Pin-Konfiguration
| Pin 1 | AVDD — 5V analog supply |
| Pin 2 | AVDD — 5V analog supply |
| Pin 3 | GND — Ground |
| Pin 4 | AVDD — 5V analog supply |
| Pin 5 | GND — Ground |
| Pin 6 | AVDD — 5V analog supply |
| Pin 7 | GND — Ground |
| Pin 8 | AVDD — 5V analog supply |
| Pin 9 | GND — Ground |
| Pin 10 | INP — Positive analog input |
| Pin 11 | INN — Negative analog input |
| Pin 12 | VCM — Common-mode voltage output |
| Pin 13 | AVDD — 5V analog supply |
| Pin 14 | GND — Ground |
| Pin 15 | REFT — Top reference decoupling |
| Pin 16 | REFB — Bottom reference decoupling |
| Pin 17 | GND — Ground |
| Pin 18 | VREF — Internal reference voltage |
| Pin 19 | GND — Ground |
| Pin 20 | DRVDD — 3.3V digital supply |
| Pin 21 | GND — Ground |
| Pin 22 | CLKP — Differential clock positive input |
| Pin 23 | CLKN — Differential clock negative input |
| Pin 24 | DRVDD — 3.3V digital supply |
| Pin 25 | GND — Ground |
| Pin 26 | D0P — LVDS data bit 0 positive |
| Pin 27 | D0N — LVDS data bit 0 negative |
| Pin 28 | DRVDD — 3.3V digital supply |
| Pin 29 | D1P — LVDS data bit 1 positive |
| Pin 30 | D1N — LVDS data bit 1 negative |
| Pin 31 | DRVDD — 3.3V digital supply |
| Pin 32 | D2P — LVDS data bit 2 positive |
| Pin 33 | D2N — LVDS data bit 2 negative |
| Pin 34 | DRVDD — 3.3V digital supply |
| Pin 35 | D3P — LVDS data bit 3 positive |
| Pin 36 | D3N — LVDS data bit 3 negative |
| Pin 37 | DRVDD — 3.3V digital supply |
| Pin 38 | D4P — LVDS data bit 4 positive |
| Pin 39 | D4N — LVDS data bit 4 negative |
| Pin 40 | DRVDD — 3.3V digital supply |
| Pin 41 | D5P — LVDS data bit 5 positive |
| Pin 42 | D5N — LVDS data bit 5 negative |
| Pin 43 | DRVDD — 3.3V digital supply |
| Pin 44 | D6P — LVDS data bit 6 positive |
| Pin 45 | D6N — LVDS data bit 6 negative |
| Pin 46 | DRVDD — 3.3V digital supply |
| Pin 47 | D7P — LVDS data bit 7 positive |
| Pin 48 | D7N — LVDS data bit 7 negative |
| Pin 49 | DRVDD — 3.3V digital supply |
| Pin 50 | D8P — LVDS data bit 8 positive |
| Pin 51 | D8N — LVDS data bit 8 negative |
| Pin 52 | DRVDD — 3.3V digital supply |
| Pin 53 | D9P — LVDS data bit 9 positive |
| Pin 54 | D9N — LVDS data bit 9 negative |
| Pin 55 | DRVDD — 3.3V digital supply |
| Pin 56 | D10P — LVDS data bit 10 positive |
| Pin 57 | D10N — LVDS data bit 10 negative |
| Pin 58 | DRVDD — 3.3V digital supply |
| Pin 59 | D11P — LVDS data bit 11 positive |
| Pin 60 | D11N — LVDS data bit 11 negative |
| Pin 61 | DRVDD — 3.3V digital supply |
| Pin 62 | D12P — LVDS data bit 12 (LSB) positive |
| Pin 63 | D12N — LVDS data bit 12 (LSB) negative |
| Pin 64 | DRVDD — 3.3V digital supply |
| Pin 65 | DRVDD — 3.3V digital supply |
| Pin 66 | GND — Ground |
| Pin 67 | CLKOUTP — Differential clock output positive |
| Pin 68 | CLKOUTN — Differential clock output negative |
| Pin 69 | DRVDD — 3.3V digital supply |
| Pin 70 | DRVDD — 3.3V digital supply |
| Pin 71 | GND — Ground |
| Pin 72 | GND — Ground |
| Pin 73 | GND — Ground |
| Pin 74 | GND — Ground |
| Pin 75 | GND — Ground |
| Pin 76 | GND — Ground |
| Pin 77 | GND — Ground |
| Pin 78 | GND — Ground |
| Pin 79 | GND — Ground |
| Pin 80 | GND — Ground |
| Pin 81 | GND — Ground |
| Pin 82 | GND — Ground |
| Pin 83 | GND — Ground |
| Pin 84 | GND — Ground |
Typische Anwendungen
ADS5444HFG/EM ist geeignet für 6 Anwendungs: Phased-Array Radar Digitiser, Electronic Warfare (EW) Receiver, Military Telemetry Acquisition, High-Energy Physics Instrumentation, Wideband Software-Defined Radio (SDR), Signal Intelligence (SIGINT) Receiver.
Phased-Array Radar Digitiser
The ADS5444HFG/EM suits phased-array radar digitiser channels where 250 MSPS, 13-bit resolution, and deterministic pipelined latency are required. The integrated input buffer and track-and-hold maintain phase coherence across multiple channels, while the QMLV Class V qualification and 84-pin hermetic ceramic HFG package support the wide -55C to +125C temperature range and radiation environments typical of airborne and shipboard radar. Pair with an LMK04832 clock jitter cleaner and an FPGA-based digital down-converter to implement coherent beamforming. The LVDS digital interface minimises EMI in densely populated RF signal-acquisition PCBs and simplifies routing back to the processing FPGA.
Empfohlen
Electronic Warfare (EW) Receiver
The ADS5444HFG/EM is well-suited to electronic warfare receiver front-ends that demand high sample rate, MIL-spec reliability, and proven supply-chain integrity. The 250 MSPS, 13-bit architecture captures wide instantaneous bandwidth for IF sampling of threat-signal intercept receivers, while the 5 V analog supply and 2.2 Vp-p input range match common RF downconverter output levels. The MIL-PRF-38535 QMLV Class V qualification includes radiation hardness assurance, making the part viable for high-altitude EW platforms. Use with an RF AGC stage, an IF amplifier, and a Virtex-6 or Kintex-7 FPGA for pulse detection and de-interleaving.
Empfohlen
Military Telemetry Acquisition
The ADS5444HFG/EM enables high-fidelity telemetry data acquisition in flight-test instrumentation, missile telemetry, and range-safety applications where MIL-spec qualification is mandatory. The 13-bit resolution captures dynamic-range variations in vibration, strain-gauge, and sensor-array signals, while the 250 MSPS sample rate handles wideband multiplexed sensor channels. The hermetic ceramic HFG package and Class V screening protect against humidity, vibration, and thermal-cycling stresses typical of high-g flight environments. Pair with an instrumentation amplifier front-end and an FPGA frame formatter to implement IRIG-106 Chapter 10 telemetry downlink chains.
Empfohlen
High-Energy Physics Instrumentation
The ADS5444HFG/EM supports high-energy physics experiments and accelerator instrumentation where radiation tolerance and long-term reliability are required. The QMLV Class V qualification includes radiation hardness assurance (RHA) data, while the hermetic ceramic HFG package provides mechanical stability in cryostat and vacuum-chamber environments. The 250 MSPS, 13-bit pipeline digitises photomultiplier, Cherenkov, and calorimeter detector front-ends with deterministic latency ideal for time-of-flight measurement. Use in conjunction with a fibre-optic data link and a radiation-tested FPGA such as the Xilinx Virtex-4QV or Microsemi RTG4 for space-deployed experiments.
Empfohlen
Wideband Software-Defined Radio (SDR)
The ADS5444HFG/EM can serve as the digitiser core in wideband military SDR receivers covering HF, VHF, and UHF bands. The 250 MSPS sample rate, 13-bit resolution, and pipelined architecture deliver sufficient spurious-free dynamic range (SFDR) for HF through L-band signal capture, while the MIL-PRF-38535 Class V qualification enables deployment in tactical manpack, vehicular, and airborne SDR platforms. The LVDS outputs interface directly to a Kintex-7 FPGA hosting DDC and channeliser IP. Use with an RF front-end LNA/mixer and a fast-settling NCO synthesiser for tunable multi-band operation.
Empfohlen
Signal Intelligence (SIGINT) Receiver
The ADS5444HFG/EM fits wide-bandwidth SIGINT intercept receivers that digitise large RF segments for downstream spectral analysis and emitter geolocation. Its 250 MSPS / 13-bit pipeline provides wide instantaneous bandwidth and good linearity for carrier detection, while the QMLV Class V qualification and hermetic packaging support deployment in unattended ground sensors and airborne pods. The integrated input buffer and track-and-hold deliver a flat frequency response across the Nyquist band. Use with a multi-channel phase-coherent LO distribution scheme and a Kintex UltraScale FPGA for cross-channel time-difference-of-arrival (TDOA) processing.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ADS5444HFG/EM – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ADS5444HFG | ADS5444MPFPEP | ADS5444HFGSLASHEM |
|---|---|---|---|---|
| Package | 84-CFP (HFG) ceramic, 40.77 x 40.77 mm | 84-CFP (HFG) ceramic - same | 84-CFP (HFG) ceramic - same | 84-CFP (HFG) ceramic - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 13 bit | 13 bit | 13 bit | 13 bit |
| Sample Rate | 250 MSPS | 250 MSPS | 250 MSPS | 250 MSPS |
| Channels | 1 | 1 | 1 | 1 |
| Architecture | Pipelined | Pipelined | Pipelined | Pipelined |
| Qualification | QMLV Class V (Hi-Rel) | QML screening (standard) | Prototype/Engineering (lower screening) | QMLV Class V (identical to /EM) |
| Digital Output | LVDS, 3.3 V | LVDS, 3.3 V | LVDS, 3.3 V | LVDS, 3.3 V |
| Supply Current (typ) | 410 mA | 410 mA | 410 mA | 410 mA |
Wichtigste Unterscheidungsmerkmale
- QMLV Class V screening for MIL-STD applications (vs. ADS5444 (commercial, plastic))
- Hermetic ceramic HFG package for extreme environments (vs. ADS5444 (LQFP-64 plastic))
- Integrated input buffer isolates source from internal switching (vs. Discrete input-buffer + pipelined ADC approach)
Designhinweise
Use separate low-noise LDOs for the 5 V AVDD and 3.3 V DRVDD rails - e.g. a TPS7A4701 for the analog rail and a TPS7A3001 for the digital rail - to prevent switching noise from the LVDS outputs from coupling back into the analog signal path and degrading SNR. Place 10 uF and 0.1 uF ceramic bypass capacitors adjacent to every AVDD and DRVDD pin, and use a ground-starved input rather than split-plane routing to maintain clean analog ground return paths.
Route the 13 LVDS data pairs and the LVDS clock pair with controlled 100-ohm differential impedance on the ceramic HFG PCB. Keep LVDS traces short (<5 cm when feasible), and 100-ohm terminate each pair at the receiver with a high-precision resistor network. Avoid routing LVDS over plane splits - use a solid DRVDD reference plane and stitch ground vias densely along the route.
The ceramic 84-pin HFG package is hermetic but requires careful handling - avoid mechanical stress on the leads, and follow MIL-STD-883 ESD protocols during assembly. When prototyping, request the ADS5444MPFPEP engineering grade first to validate signal-chain performance before committing to ADS5444HFG/EM Class V production units. Always confirm the lot acceptance test (LAT) and radiation hardness reports from TI for QMLV Class V designs.
