Texas Instruments

ADS774KP - 12-Bit, 8.5us SAR ADC in 28-Pin PDIP | Texas Instruments

Артикул: ADS774KP ✓ Активен
+5 V Vdss 28-pin PDIP Package Yes Speed
MOQ: 1 |

ADS774KP Обзор

The Texas Instruments ADS774KP is a 12-bit, single-input successive-approximation analog-to-digital converter with an 8.5 microsecond maximum conversion time, housed in a 28-pin PDIP package. The converter uses an internal capacitor array, includes internal sampling, and can operate from a single +5 V supply. Its microprocessor-compatible architecture integrates the converter, reference, clock, and digital interface in one device.

An ADC is a mixed-signal integrated circuit that converts an analog voltage into a digital number for processing, measurement, or control. The ADS774 belongs to the successive-approximation ADC family, whose internal CDAC compares the sampled input against binary-weighted references during successive conversion cycles. Compared with flash and dual-slope architectures, this SAR approach combines compact implementation, microprocessor-compatible control, and fast acquisition for many industrial, instrumentation, and embedded measurement systems.

The principal operating characteristics are 12-bit resolution, one analog input, successive-approximation conversion, a maximum conversion time of 8.5 microseconds, single +5 V operation, and a 28-pin PDIP package. Internal sampling eliminates the external sample-and-hold circuitry required by many earlier converters. The integrated reference and clock also simplify system implementation compared with modular data-acquisition designs.

The manufacturer describes the ADS774 as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications. This compatibility stems from the microprocessor-compatible interface and the converter family’s established signal arrangement. Engineers should nevertheless verify the complete pin description, timing behavior, input range, output coding, reference requirements, and acquisition sequencing in the manufacturer datasheet before replacing an existing design.

Typical uses include industrial process measurement, laboratory instrumentation, digital panel meters, data-acquisition systems, and embedded control equipment where a sampled bipolar or unipolar analog signal must be converted for a microprocessor. The internal sampling architecture is especially useful when board area is constrained and an external sample-and-hold amplifier would otherwise be required.

The primary design consideration is to follow the manufacturer’s interface and timing diagram when connecting the converter to a microprocessor. Provide the required bypass and reference-decoupling capacitors close to their associated pins, and observe signal settling requirements before initiating conversion. Because the ADS774KP is a through-hole 28-pin package, its larger footprint must be included when planning board space and connector placement.

This product page organizes the known electrical characteristics, package details, interface documentation, and application guidance into one engineering reference. It also identifies the legacy converter families that can serve as migration targets while highlighting the parameters that must be checked before approving a board-level replacement.

Аналоги без доработки для ADS774KP — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

ADC574

✅ Прямая замена
📦 28-pin PDIP
Legacy 12-bit converter family; ADS774KP adds internal sampling and single +5 V operation while retaining an 8.5 us maximum conversion time; exact power reduction is not stated

📋 Справочный аналог (нет в каталоге)

ADC674

✅ Прямая замена
📦 28-pin PDIP
Legacy converter family identified for replacement in most applications; ADS774KP provides internal sampling and single +5 V operation with an 8.5 us maximum conversion time

📋 Справочный аналог (нет в каталоге)

ADC774

✅ Прямая замена
📦 28-pin PDIP
Legacy converter family identified for replacement in most applications; ADS774KP adds internal sampling and lower power consumption, with exact numeric differences not stated

📋 Справочный аналог (нет в каталоге)

ADS774KP Максимальные параметры и электрические характеристики

Разрешение 12 bit
Analog Input Count 1 input
Conversion Architecture Successive approximation (SAR)
Maximum Conversion Time 8.5 us
Напряжение питания +5 V
Internal Sampling Yes
Internal Reference Yes
Internal Clock Yes
Тип интерфейса Microprocessor-compatible
Converter Technology CMOS
Internal Sampling Array Capacitor array (CDAC)
Корпус 28-pin PDIP
Тип монтажа Through-hole
External Sample-and-Hold Requirement Eliminated in most applications

Руководство по цоколевке ADS774KP в корпусе 28-pin pdip

Цоколевка для ADS774KP (корпус 28-pin pdip). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 28-pin pdip для ADS774KP

Нет подробных данных о распиновке для ADS774KP.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ADS774KP подходит для 6 применениеs: Industrial Process Measurement, Laboratory Instrumentation, Digital Panel Meter, Embedded Data-Acquisition System, Industrial Control Feedback, Legacy Test and Measurement Upgrade.

🏭

Industrial Process Measurement

The ADS774KP fits industrial process measurement when a controller or data logger must convert a conditioned analog signal into a 12-bit digital value. Its successive-approximation architecture provides an 8.5 microsecond maximum conversion time, while the single-input format suits one channel at a time. Internal sampling reduces the external sample-and-hold circuitry normally associated with older converter designs. Use the device behind op-amp signal conditioning when the process signal exceeds the converter input range, and follow the manufacturer reference and bypass-capacitor arrangements for stable measurements.

🔧

Laboratory Instrumentation

The ADS774KP is appropriate for laboratory measurement equipment that acquires slow or moderate-rate analog waveforms and transfers each result to a microprocessor. Its 12-bit resolution provides 4096 output codes, while the 8.5 microsecond maximum conversion time supports acquisition systems that do not require flash-converter throughput. Internal sampling, reference, and clock functions reduce board complexity compared with a modular converter design. The instrument designer should still apply suitable input protection, analog filtering, and grounded reference routing to preserve measurement repeatability.

📺

Digital Panel Meter

A digital panel meter can use the ADS774KP to convert a conditioned sensor voltage into a value displayed by a digital controller. The one-input SAR architecture is efficient for measurements performed on a sampled basis, and its 8.5 microsecond maximum conversion time is well suited to typical panel-update rates. Internal sampling helps simplify the analog front end, while the microprocessor-compatible interface supports integration with display and keypad control electronics. Select input conditioning and filtering according to the sensor output range rather than connecting raw sensor voltages directly.

🖥️

Embedded Data-Acquisition System

The ADS774KP supports embedded data-acquisition systems that periodically measure one analog input and send the converted result to a processor. Its 12-bit resolution, 8.5 microsecond maximum conversion time, and internal sampling architecture provide a practical combination of accuracy and implementation simplicity. A controller can initiate acquisition, read the digital output, and perform system scaling or calibration in firmware. Validate acquisition timing and input settling against the manufacturer timing diagram, especially when the sensor source has high output impedance or a rapidly changing signal.

⚡

Industrial Control Feedback

The ADS774KP can serve as the measurement element in a closed-loop industrial controller that monitors a pressure, temperature, or position transducer. The converter’s 12-bit result provides discrete feedback information, while the single +5 V supply and integrated sampling, reference, and clock functions support a compact analog-to-digital subsystem. Signal-conditioning circuitry must translate the sensor output into the ADC input range and protect the input from transients. Firmware should also include calibration and fault detection because converter resolution does not by itself determine the accuracy of the complete measurement chain.

📡

Legacy Test and Measurement Upgrade

The ADS774KP is useful when modernizing a legacy test or measurement instrument built around ADC574, ADC674, or ADC774 interfaces. Texas Instruments identifies the ADS774 as a drop-in replacement for those models in most applications, making it a practical option when retaining the existing board architecture is important. The modern CMOS implementation adds internal sampling and supports single +5 V operation. Before replacement, compare every pin, the input range, conversion timing, output code, reference behavior, and acquisition control sequence against the original circuit.

Сводка рекомендуемых товаров

ADC574 Legacy converter family replaced by ADS774 Используется в: Industrial Process Measurement, Digital Panel Meter, Legacy Test and Measurement Upgrade ADC674 Legacy converter family identified for ADS774 migration Используется в: Industrial Process Measurement, Embedded Data-Acquisition System, Legacy Test and Measurement Upgrade ADC774 Legacy data-conversion interface considered for replacement Используется в: Laboratory Instrumentation, Industrial Control Feedback, Legacy Test and Measurement Upgrade
What is the ADS774KP?
The ADS774KP is a 12-bit, single-input successive-approximation ADC from Texas Instruments packaged in a 28-pin PDIP. According to the manufacturer datasheet, it combines internal sampling, a reference, a clock, and a microprocessor-compatible interface. Its maximum conversion time is 8.5 microseconds, and the converter can operate from a single +5 V supply.
What are the key specifications of ADS774KP that engineers should know?
The key ADS774KP specifications are 12-bit resolution, one analog input, SAR conversion, an 8.5 microsecond maximum conversion time, and operation from a single +5 V supply. Texas Instruments describes the device as a microprocessor-compatible sampling CMOS ADC with internal sampling, an internal reference, an internal clock, and a capacitor-array CDAC in a 28-pin PDIP package.
Where can I download the ADS774KP datasheet PDF?
The official ADS774KP datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/lit/ds/symlink/ads774.pdf. The manufacturer datasheet is the controlling document for the complete pinout, electrical characteristics, operating timing, reference arrangement, and application circuit. Use that document when assigning PCB signals and validating converter timing.
Where can I find the ADS774KP pinout?
The ADS774KP pinout is shown in the Texas Instruments ADS774 datasheet under the pin configuration and pin-description information. The component uses a 28-pin PDIP outline, but individual signal names and alternate functions must be taken from the manufacturer pin-description table. Use those descriptions to assign converter, interface, reference, clock, and supply connections.
What can replace the ADS774KP?
The Texas Instruments ADS774 is identified as a drop-in replacement for ADC574, ADC674, and ADC774 models in most applications. That statement supports legacy-system migration when the existing converter uses the same 28-pin footprint and compatible interface. Confirm pin assignments, acquisition timing, output coding, and electrical limits in the manufacturer datasheet before approving the substitution.
Is the ADS774KP the same as the ADC574?
The ADS774KP is not simply an identical ADC574; it is a CMOS implementation that replaces ADC574-family devices in most applications. According to the Texas Instruments datasheet, the ADS774 adds internal sampling, consumes less power, and operates from a single +5 V supply. Existing users must still verify input range, output coding, timing, and every PCB connection.
What is the best Analog Devices equivalent for ADS774KP?
The Analog Devices equivalent is identified as the ADC574 family within the ADS774 cross-reference information. The compatibility statement applies to most applications rather than every legacy board. Before selecting it as a drop-in replacement, confirm the 28-pin pinout, conversion timing, reference implementation, data interface, and electrical ratings for the specific ADC574 suffix being used.
ADS774KP vs ADC574KP - which is better for a legacy instrument?
The ADS774KP is generally preferable for a legacy instrument when the original design uses an ADC574 and the board can accept the ADS774 electrical behavior. The manufacturer describes the ADS774 as a drop-in replacement in most applications, with internal sampling, lower power consumption, and single +5 V operation. The deciding check is full compatibility with the existing 28-pin PCB and interface timing.
ADS774KP vs ADC674KP - what is the difference?
The principal difference is that the ADS774KP is a 12-bit CMOS SAR converter designed as a replacement for ADC674-family devices in most applications. The manufacturer highlights internal sampling, lower power consumption, and single +5 V operation. Exact input-range, timing, and output-coding differences for the compared suffix must be checked in the manufacturer datasheet.
When should I choose ADS774KP over ADC574KP?
Choose the ADS774KP when maintaining an ADC574-based legacy design and the ADS774 datasheet confirms that its input, interface, timing, and pin arrangement satisfy the existing circuit. The ADS774’s internal sampling can reduce external circuitry, while its CMOS construction supports lower power consumption. Retain the ADC574 only when a required legacy function is not reproduced by the ADS774.
Is ADS774KP suitable for industrial data acquisition?
The ADS774KP is suitable for many industrial data-acquisition applications because it combines 12-bit resolution, an 8.5 microsecond maximum conversion time, internal sampling, and a microprocessor-compatible interface. The application still depends on the analog input range, signal conditioning, noise performance, reference stability, and operating-temperature requirements listed in the manufacturer datasheet.
How much power does the ADS774KP consume?
The manufacturer states that the ADS774 consumes less power than the ADC574, ADC674, and ADC774 families it replaces, but the numerical operating-current and power-consumption limits must be taken from the ADS774 datasheet. Use those values for battery sizing, thermal analysis, and supply-budget calculations rather than assuming a generic CMOS figure.
What is the lead time for ADS774KP?
The current production lead time and available quantity for ADS774KP should be requested through the Request a Quote form on this page. Because stock and lead time can change by package, quantity, and order date, use the quote form for the complete order configuration. The request should specify the 28-pin PDIP ADS774KP MPN and required quantity.
Where can I buy ADS774KP online?
ADS774KP ordering and lead-time information can be requested through the Request a Quote form on this page. Quote requests should identify the exact ADS774KP ordering code, required quantity, shipment destination, and target date. This approach provides a current response for the specific package configuration instead of an outdated or ambiguous inventory indication.
How do I design a power and ground layout for ADS774KP?
Follow the ADS774 datasheet’s recommended application circuit for supply and reference bypass capacitors, and place each capacitor close to the corresponding device pin. Keep analog input routing short and away from high-current digital paths, while observing the permitted input range. The 28-pin PDIP footprint also requires unobstructed access around the through-hole pins for assembly and inspection.

Справочные инженерные данные для ADS774KP — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ADS774KP when maintaining or redesigning a legacy 28-pin PDIP data-acquisition board based on ADC574, ADC674, or ADC774 interfaces. It is particularly attractive where internal sampling, lower power consumption, and single +5 V operation can simplify the analog subsystem without changing the processor architecture. Select ADC574 when its original performance and electrical behavior are explicitly required, or when a function absent from the ADS774 must be retained. ADC674 and ADC774 remain relevant when existing documentation, qualification, or system behavior depends on those legacy converters. Compatibility applies in most applications rather than universally, so the deciding criteria are complete pin compatibility, input range, output coding, acquisition timing, reference behavior, and electrical limits. Validate these items in the manufacturer datasheet before releasing a PCB substitution.

Сравнение с аналогами

Параметр Этот товар ADC574 ADC674 ADC774
Manufacturer Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-pin PDIP 28-pin PDIP 28-pin PDIP 28-pin PDIP
Internal Sampling Yes Legacy converter; comparison requires datasheet review Legacy converter; comparison requires datasheet review Legacy converter; comparison requires datasheet review
Microprocessor Interface Integrated microprocessor-compatible interface Microprocessor-compatible legacy family Microprocessor-compatible legacy family Microprocessor-compatible legacy family

Ключевые отличия

  • Internal sampling reduces external converter complexity (против ADC574)
  • Single-supply CMOS implementation (против ADC674)
  • Fast maximum conversion interval (против ADC774)

Заметки по проектированию

Follow the reference and bypass-capacitor arrangement in the manufacturer application circuit. Place the input and output capacitors close to their corresponding pins to minimize parasitic inductance and high-frequency supply noise. Keep the analog input trace short, use a continuous ground reference beneath the converter area, and route digital control and data lines away from the input node. The 28-pin PDIP outline requires additional board clearance compared with a surface-mount ADC.

Do not treat the statement that ADS774 replaces ADC574, ADC674, and ADC774 models as a blanket guarantee for every suffix. Compare pin names, input range, output coding, reference voltage, conversion timing, acquisition sequence, and supply limits before modifying a production board. Pay particular attention to polarity and conversion status because incorrect read timing can capture a previous conversion result.

Design the source impedance and acquisition network so the analog input settles within the ADS774KP acquisition interval. Use the manufacturer acquisition-time requirements when selecting series resistance, capacitor values, and sensor bandwidth. If the source can slew rapidly, place an appropriate low-pass filter before the input; excessive input capacitance can increase settling time, while excessive source impedance can degrade conversion accuracy.

The ADS774KP operates from a single +5 V supply. Decouple that supply at the device with the capacitance and placement specified in the manufacturer circuit, and account for the converter’s input current and digital-output activity when designing the supply budget. Although the ADS774 consumes less power than the legacy families it replaces, use the numerical limits from the datasheet for thermal and power calculations.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for ADS774KP. AEC-Q100 qualification is not indicated for this catalog listing.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ADS774KP datasheet ADS774KP datasheet pdf ADS774KP pinout ADS774KP schematic ADS774KP specifications ADS774KP equivalent ADS774KP replacement ADS774KP cross reference ADS774KP vs ADC574 ADS774KP price ADS774KP stock Texas Instruments ADS774KP ADS774KP 12-bit SAR ADC ADS774KP 28-pin PDIP

Связанные компоненты & термины

Texas Instruments ADS774KP ADS774 ADC574 ADC674 ADC774 analog-to-digital converter ADC successive-approximation ADC SAR mixed-signal integrated circuit microprocessor-compatible interface internal sampling capacitor array CDAC single +5 V supply 12-bit resolution 8.5 microsecond conversion time 28-pin PDIP through-hole package industrial process measurement data-acquisition system digital panel meter laboratory instrumentation
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ