Texas Instruments

ADS7824PB - 12-Bit 4-Channel SAR ADC | Texas Instruments

Артикул: ADS7824PB ✓ Активен
+5 V Vdss 28-pin plastic DIP Package On-chip clock Speed
MOQ: 1 |

ADS7824PB Обзор

The Texas Instruments ADS7824PB is a 12-bit, four-channel successive-approximation analog-to-digital converter with a 25 µs maximum sampling-and-conversion time, ±10 V input range, and 28-pin plastic DIP package. It supports both parallel and serial microprocessor data outputs and operates from a single +5 V supply.

An ADC is an interface IC that converts continuous analog voltages into digital values for processing by a microcontroller, DSP, PLC, or data-acquisition system. Within the signal-chain hierarchy, the ADS7824PB combines a four-input multiplexer, sample-and-hold circuitry, internal clock, reference, and successive-approximation conversion stage. This integration reduces the number of external components required for multichannel measurement systems.

Key features include 25 µs maximum sampling and conversion, ±0.5 LSB maximum integral and differential nonlinearity, channel-to-channel matching of ±0.1 %, and a laser-trimmed scaling network for the ±10 V input range. Maximum power dissipation is 50 mW. Parallel and serial interfaces allow the converter to be adapted to processors with different data-bus architectures.

The device uses a successive-approximation conversion architecture, which supports controlled conversion time and straightforward digital interfacing. Laser trimming improves scaling accuracy and channel matching, while the internal multiplexer selects among four analog input channels. The ±10 V range is particularly useful for industrial measurement systems that must monitor bipolar sensor or control signals without requiring a separate front-end attenuator for every channel.

Typical uses include industrial process monitoring, laboratory data acquisition, automated test equipment, PLC-based analog input modules, and embedded control systems. The serial interface can reduce wiring requirements where parallel data buses are inconvenient, while the parallel interface supports faster direct connection to suitable microprocessor or DSP systems.

Design the input network for the full ±10 V range and preserve the analog signal path from converter pins. Keep high-impedance signal sources close to the multiplexer and provide appropriate filtering so switching transients and electrical noise do not obscure the selected measurement. Check the input voltage limits and reference arrangement in the manufacturer datasheet before connecting external sources.

This page combines the manufacturer specifications, package details, application guidance, comparison data, and practical design notes needed to evaluate the ADS7824PB for a four-channel ±10 V acquisition design. It also identifies the few verified drop-in choices whose package and interface compatibility can be established without relying on a cross-package substitution.

Аналоги без доработки для ADS7824PB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ADS7824PB (тот же форм-фактор и посадочное место) — отличается по Integral Nonlinearity, Package, Supply Voltage, Channel-to-Channel Matching, Differential Nonlinearity.

Texas Instruments
Integral Nonlinearity: ±1/2 LSB maximum
Package: 28-pin PDIP
Supply Voltage: Single +5 V
Сравнить с ADS7824PB →
Texas Instruments
Integral Nonlinearity: +/-0.5 LSB maximum
Package: 28-pin 0.3-inch plastic DIP
Supply Voltage: +5 V single supply
Сравнить с ADS7824PB →
Texas Instruments
Integral Nonlinearity: plus or minus 2.0 LSB maximum
Package: 28-pin 0.3-inch PDIP
Supply Voltage: plus 5 V
Сравнить с ADS7824PB →

ADS7824P

✅ Прямая замена
Texas Instruments
📦 28-pin plastic DIP
12 bit · Successive-approximation register (SAR) · 4 channels · 40 kSPS · 25 us · Differential · +/-10 V · +/-0.5 LSB maximum

Уточнить цену

Открыть даташит →

ADS7825P

✅ Прямая замена
Texas Instruments
📦 28-pin plastic DIP
Successive-approximation sampling ADC · 16 bit · 4 channels · 25 us maximum · plus or minus 2.0 LSB maximum · plus or minus 10 V · plus or minus 0.1% · plus 5 V

Уточнить цену

Открыть даташит →

ADS7824PB Максимальные параметры и электрические характеристики

ADC Type Successive-approximation ADC
Разрешение 12 bit
Number of Input Channels 4 channels
Input Range ±10 V
Sampling and Conversion Time 25 µs maximum
Integral Nonlinearity ±0.5 LSB maximum
Differential Nonlinearity ±0.5 LSB maximum
Channel-to-Channel Matching ±0.1 %
Напряжение питания +5 V
Maximum Power Dissipation 50 mW
Data Output Parallel or serial microprocessor output
Input Multiplexer 4-to-1 analog input multiplexer
Sample-and-Hold On-chip sample-and-hold
Internal Reference On-chip reference
Internal Clock On-chip clock
Корпус 28-pin plastic DIP
Тип монтажа Through-hole
Temperature Grade Industrial

Руководство по цоколевке ADS7824PB в корпусе 28-pin plastic dip

Цоколевка для ADS7824PB (корпус 28-pin plastic dip). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 28-pin plastic dip для ADS7824PB

Нет подробных данных о распиновке для ADS7824PB.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ADS7824PB подходит для 6 применениеs: Industrial Process Monitoring, Laboratory Data Acquisition, Automated Test Equipment, PLC Analog Input Module, Embedded Control System, Power Supply and System Diagnostics.

🏭

Industrial Process Monitoring

The ADS7824PB fits four-channel industrial monitoring because it combines a 12-bit conversion resolution with a standard ±10 V bipolar input range and 25 µs maximum sampling-and-conversion time. Its four-input multiplexer reduces the number of separate converter circuits required when monitoring pressure, temperature, position, or analog controller signals. The laser-trimmed scaling network provides ±0.1 % channel-to-channel matching, which helps preserve consistency across process channels. Use protected inputs, suitable filtering, and a single +5 V supply arrangement; maximum power dissipation is 50 mW, keeping auxiliary thermal requirements manageable in compact industrial equipment.

🔧

Laboratory Data Acquisition

The ADS7824PB is useful for laboratory data-acquisition systems that must capture several bipolar analog channels with a 12-bit ADC. Its ±10 V range accommodates many sensor and amplifier outputs without changing the external scaling range, while the 25 µs maximum conversion time supports responsive multichannel sampling. The internal sample-and-hold, clock, reference, and multiplexer reduce system complexity, and the parallel or serial interface permits connection to different controller architectures. Designers should add appropriate anti-alias filtering, isolate high-impedance sources, and account for source settling time before selecting the next conversion interval.

🖥️

Automated Test Equipment

The ADS7824PB can serve as the analog measurement front end in automated test equipment that evaluates several ±10 V test points. Its four-channel multiplexer permits sequential measurement without four complete converter assemblies, and the 12-bit result provides 4096 digital codes across the full-scale conversion range. The 25 µs maximum sampling-and-conversion time supports short test-cycle measurements, while parallel output can simplify attachment to a suitable processor and serial output can reduce connector wiring. Keep relay or switching networks away from sensitive inputs and provide filtering that preserves the converter’s stated nonlinearity and channel-matching performance.

🏭

PLC Analog Input Module

The ADS7824PB is appropriate for a PLC-oriented analog input module requiring four bipolar inputs, 12-bit resolution, and a single +5 V supply. The ±10 V range maps directly onto common industrial signal limits, and the 25 µs maximum conversion time allows the module to refresh multiple channels efficiently. Parallel or serial microprocessor outputs provide flexibility between a central processor and a local controller. Signal conditioning must handle transient overvoltage, source impedance, and grounding before the ADS7824PB inputs, while the maximum 50 mW device dissipation helps maintain compact, low-power module designs.

📱

Embedded Control System

The ADS7824PB supports embedded controllers that need to supervise up to four analog channels rather than operate only as a digital system. Its integrated multiplexer, sample-and-hold stage, reference, and clock reduce external analog infrastructure, while 12-bit resolution and ±0.1 % channel matching suit supervisory control and diagnostic measurements. The serial interface can minimize wiring to a microcontroller, whereas the parallel interface can suit a processor with a suitable data bus. Firmware should calibrate gain and offset, reject invalid channel codes, and sequence acquisitions so the selected source has adequate settling time before sampling.

⚡

Power Supply and System Diagnostics

The ADS7824PB can monitor several bipolar system rails or diagnostic outputs in industrial power-control equipment. The ±10 V input range covers many scaled supply measurements, while the four-channel multiplexer permits sequential supervision with a single 12-bit converter. A 25 µs maximum conversion time gives sufficient responsiveness for supervisory loops that do not require waveform-level accuracy, and maximum power dissipation of 50 mW limits the converter’s thermal contribution. Accurate results still depend on divider tolerances, input protection, reference stability, and a layout that keeps high-current switching nodes separate from the analog input traces.

What is the ADS7824PB?
The ADS7824PB is a Texas Instruments 12-bit, four-channel successive-approximation ADC packaged in a 28-pin plastic DIP. According to the manufacturer datasheet, it integrates a four-input multiplexer, sample-and-hold circuit, clock, reference, and parallel or serial microprocessor interface while accepting a standard industrial input range of ±10 V.
What is the conversion time of the ADS7824PB?
The ADS7824PB completes sampling and conversion in 25 µs maximum. According to the Texas Instruments manufacturer datasheet, this figure applies to the 12-bit conversion process and should be used when sizing an acquisition loop or calculating the minimum interval between channel updates. The converter also supports both parallel and serial data-output interfaces.
What input voltage range does ADS7824PB support?
The ADS7824PB supports a ±10 V input range. According to the Texas Instruments manufacturer datasheet, laser-trimmed scaling resistors implement this industrial bipolar range, while channel-to-channel matching is specified at ±0.1 %. External signals must remain within the absolute input limits documented for the selected supply configuration.
How accurate is the ADS7824PB ADC?
The ADS7824PB provides 12-bit resolution with ±0.5 LSB maximum integral nonlinearity and ±0.5 LSB maximum differential nonlinearity. According to the Texas Instruments manufacturer datasheet, laser-trimmed scaling also produces ±0.1 % channel-to-channel matching. These characteristics suit multichannel industrial measurement and data-acquisition systems requiring repeatable scaling.
Does ADS7824PB have parallel and serial outputs?
Yes, the ADS7824PB provides both parallel and serial microprocessor data outputs. According to the Texas Instruments manufacturer datasheet, the parallel interface is useful for direct connection to compatible processors and DSPs, while the serial interface reduces the number of signal connections when board wiring or connector count is important. The unused interface pins must be handled as directed in the datasheet.
What power supply does ADS7824PB use?
The ADS7824PB operates from a single +5 V supply. According to the Texas Instruments manufacturer datasheet, maximum power dissipation is 50 mW. This low-power operating arrangement suits industrial and embedded measurement systems, although bypass-capacitor selection and analog grounding remain essential for stable conversion results.
Where can I download the ADS7824PB datasheet PDF?
The official ADS7824PB datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads7824.pdf. The document contains the electrical characteristics, pin descriptions, input-range details, interface timing, application information, and package drawings. Use the manufacturer PDF as the controlling reference for PCB connections and operating limits.
Where can I find the ADS7824PB pinout?
The ADS7824PB pinout is shown in the pin-configuration section of the Texas Instruments ADS7824 manufacturer datasheet. The device is a 28-pin plastic DIP with four analog inputs and parallel or serial digital interfaces. Assign every PCB track directly from the numbered manufacturer drawing rather than inferring connections from a generic 28-pin diagram.
Can ADS7825 replace ADS7824PB?
The ADS7825 is identified by Texas Instruments as pin-compatible with the ADS7824, but package selection must match the board's 28-pin plastic DIP footprint. The ADS7825 belongs to the 16-bit converter family, so code, resolution, conversion-time, and scaling assumptions must be reviewed before substitution. Use the manufacturer datasheet to confirm every electrical and timing difference.
Is ADS7824P a drop-in replacement for ADS7824PB?
The ADS7824P is the closest same-family designation identified for the ADS7824PB, but the suffix details and operating limits should be checked against the manufacturer ordering information before installation. Both relate to the ADS7824 12-bit, four-channel converter family. Confirm the exact package, temperature range, pin functions, and supply requirements on the selected part’s datasheet.
When should I choose ADS7824PB over a higher-resolution ADC?
Choose the ADS7824PB when a four-channel ±10 V measurement system needs 12-bit resolution, a 25 µs maximum conversion time, and no more than 50 mW maximum power dissipation. According to the Texas Instruments manufacturer datasheet, it combines laser-trimmed scaling with parallel and serial outputs. A higher-resolution converter may be preferable only when finer quantization or lower noise is required.
Is ADS7824PB suitable for industrial data acquisition?
The ADS7824PB is suitable for industrial data-acquisition and process-control systems that require four ±10 V inputs and 12-bit conversion. According to the Texas Instruments manufacturer datasheet, it offers 25 µs maximum sampling and conversion, ±0.5 LSB maximum nonlinearity, ±0.1 % channel matching, and a single +5 V supply. Input filtering and grounding still require application-specific validation.
What can replace the ADS7824PB?
The most defensible replacements are the ADS7824P and a package-matched ADS7825 variant because Texas Instruments identifies the ADS7825 as pin-compatible with the ADS7824. No verified cross-brand device was established with the same 28-pin plastic DIP footprint and closely matched operating characteristics. Verify pin functions, resolution, scaling, timing, and temperature limits before approving any replacement.
Is ADS7824PB the same as ADS7825?
No, the ADS7824PB and ADS7825 are related but not identical converters. The ADS7824PB is a 12-bit, four-channel ADC, while the ADS7825 belongs to the 16-bit converter family. Texas Instruments identifies the ADS7825 as pin-compatible with the ADS7824, but firmware and calibration must accommodate the different resolution and associated conversion behavior.
Where can I buy ADS7824PB and check current lead time?
Use the Request a Quote form on this page to request ADS7824PB pricing, stock confirmation, and current lead time for the 28-pin plastic DIP package. The component is a standard catalog part with a manufacturer datasheet, but inventory and commercial terms can change by quantity and date. Include the required quantity and delivery location with the request.
What are the key specifications of ADS7824PB that engineers should know?
The key ADS7824PB specifications are 12-bit resolution, four analog inputs, ±10 V input range, 25 µs maximum sampling and conversion, ±0.5 LSB maximum nonlinearity, ±0.1 % channel matching, single +5 V operation, and 50 mW maximum power dissipation. According to the Texas Instruments manufacturer datasheet, the 28-pin plastic DIP device also supports parallel and serial microprocessor outputs.
What is the best Texas Instruments equivalent for ADS7824PB?
The closest verified Texas Instruments choices are the ADS7824P and a package-matched ADS7825 variant. The ADS7824P remains within the 12-bit ADS7824 family, while Texas Instruments explicitly describes the ADS7825 as pin-compatible with the ADS7824. Neither choice should be installed without checking the exact suffix, package, temperature grade, electrical limits, and interface timing.

Справочные инженерные данные для ADS7824PB — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ADS7824PB for a four-channel, ±10 V acquisition design that specifically targets 12-bit resolution, a 25 µs maximum sampling-and-conversion time, and parallel or serial processor outputs. Select ADS7824P when its exact ordering suffix and temperature grade meet the design requirements and it provides a package-identical route within the same converter family. Consider ADS7825P when its 16-bit resolution is useful and the board can accommodate revised scaling, code range, timing, and firmware calibration. The ADS7825 is identified as pin-compatible with the ADS7824, but compatibility does not remove the need to check electrical limits and digital behavior. No cross-brand substitute is recommended without an independently verified 28-pin plastic DIP footprint, matching input range, interface functions, timing, and lifecycle requirements.

Сравнение с аналогами

Параметр Этот товар ADS7824P ADS7825P
Brand Texas Instruments Texas Instruments Texas Instruments
Package 28-pin plastic DIP 28-pin plastic DIP 28-pin plastic DIP
ADC Architecture Successive-approximation ADC Successive-approximation ADC Successive-approximation ADC
Resolution 12 bit 12 bit 16 bit

Ключевые отличия

  • Provides the specified 12-bit resolution within the original ADS7824 family (против ADS7825P)
  • Combines four analog channels with a 25 µs maximum conversion time (против ADS7824P)
  • Uses laser-trimmed scaling for a standard industrial input range (против ADS7825P)

Заметки по проектированию

Treat the four analog inputs as high-impedance measurement nodes. Place input-series resistance, clamping protection, and filtering close to the converter, and return filter currents through a quiet analog-ground path. The multiplexer must settle to the selected channel before conversion, so validate the external source impedance and capacitor values against the sampling network described in the manufacturer datasheet.

Separate analog input traces from digital clock and data routes to reduce conversion errors. Keep the 28-pin DIP in a through-hole layout consistent with the package drawing, provide local supply bypassing at the appropriate pins, and avoid routing switching-regulator outputs beneath the converter. A continuous ground strategy is especially important when the measured sources are referenced to systems with substantial ground potential differences.

Do not assume that a pin-compatible replacement is automatically interchangeable in software. ADS7824PB provides 12-bit results, while the pin-compatible ADS7825 family provides 16-bit results, changing code range, scaling, noise behavior, and possibly conversion timing. Confirm the exact ordering suffix, package, temperature grade, electrical limits, interface timing, and calibration routine before substituting either alternative.

Use a stable, low-noise +5 V source and place the recommended bypass network close to the supply pins. Maximum device power dissipation is 50 mW, but accuracy also depends on reference and supply behavior. Avoid sharing narrow supply paths with motors, relays, or other high-current loads, and verify the analog input range against the supply condition used in the final circuit.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The component is an industrial ADC; no automotive qualification claim is made. Compliance declarations require confirmation from the manufacturer or the exact ordering documentation.

Данные проверены: 2026-11-14 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ADS7824PB datasheet ADS7824PB datasheet pdf ADS7824PB pinout ADS7824PB specifications ADS7824PB 28 pin DIP ADS7824PB application circuit ADS7824PB drop-in replacement ADS7824PB vs ADS7825P ADS7824PB equivalent Texas Instruments ADS7824PB ADS7824PB price ADS7824PB stock

Связанные компоненты & термины

Texas Instruments ADS7824PB ADS7824P ADS7825P ADS7824 ADS7825 12-bit ADC 16-bit ADC successive-approximation ADC analog-to-digital converter four-input multiplexer sample-and-hold parallel interface serial interface 28-pin plastic DIP through-hole package ±10 V input range 25 µs conversion time integral nonlinearity differential nonlinearity channel-to-channel matching single +5 V supply industrial data acquisition process monitoring embedded control system
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ