ADS7824PB - 12-Bit 4-Channel SAR ADC | Texas Instruments
N.º da peça: ADS7824PB ✓ AtivoADS7824PB Visão geral
An ADC is an interface IC that converts continuous analog voltages into digital values for processing by a microcontroller, DSP, PLC, or data-acquisition system. Within the signal-chain hierarchy, the ADS7824PB combines a four-input multiplexer, sample-and-hold circuitry, internal clock, reference, and successive-approximation conversion stage. This integration reduces the number of external components required for multichannel measurement systems.
Key features include 25 µs maximum sampling and conversion, ±0.5 LSB maximum integral and differential nonlinearity, channel-to-channel matching of ±0.1 %, and a laser-trimmed scaling network for the ±10 V input range. Maximum power dissipation is 50 mW. Parallel and serial interfaces allow the converter to be adapted to processors with different data-bus architectures.
The device uses a successive-approximation conversion architecture, which supports controlled conversion time and straightforward digital interfacing. Laser trimming improves scaling accuracy and channel matching, while the internal multiplexer selects among four analog input channels. The ±10 V range is particularly useful for industrial measurement systems that must monitor bipolar sensor or control signals without requiring a separate front-end attenuator for every channel.
Typical uses include industrial process monitoring, laboratory data acquisition, automated test equipment, PLC-based analog input modules, and embedded control systems. The serial interface can reduce wiring requirements where parallel data buses are inconvenient, while the parallel interface supports faster direct connection to suitable microprocessor or DSP systems.
Design the input network for the full ±10 V range and preserve the analog signal path from converter pins. Keep high-impedance signal sources close to the multiplexer and provide appropriate filtering so switching transients and electrical noise do not obscure the selected measurement. Check the input voltage limits and reference arrangement in the manufacturer datasheet before connecting external sources.
This page combines the manufacturer specifications, package details, application guidance, comparison data, and practical design notes needed to evaluate the ADS7824PB for a four-channel ±10 V acquisition design. It also identifies the few verified drop-in choices whose package and interface compatibility can be established without relying on a cross-package substitution.
Alternativas drop-in para ADS7824PB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ADS7824PB (mesmo formato e footprint) — diferindo em Integral Nonlinearity, Package, Supply Voltage, Channel-to-Channel Matching, Differential Nonlinearity.
ADS7824P
✅ Drop-InConsulte o preço
Ver ficha técnica →ADS7825P
✅ Drop-InConsulte o preço
Ver ficha técnica →ADS7824PB Classificações máximas e características elétricas
| ADC Type | Successive-approximation ADC |
| Resolução | 12 bit |
| Number of Input Channels | 4 channels |
| Input Range | ±10 V |
| Sampling and Conversion Time | 25 µs maximum |
| Integral Nonlinearity | ±0.5 LSB maximum |
| Differential Nonlinearity | ±0.5 LSB maximum |
| Channel-to-Channel Matching | ±0.1 % |
| Tensão de alimentação | +5 V |
| Maximum Power Dissipation | 50 mW |
| Data Output | Parallel or serial microprocessor output |
| Input Multiplexer | 4-to-1 analog input multiplexer |
| Sample-and-Hold | On-chip sample-and-hold |
| Internal Reference | On-chip reference |
| Internal Clock | On-chip clock |
| Encapsulamento | 28-pin plastic DIP |
| Tipo de montagem | Through-hole |
| Temperature Grade | Industrial |
Guia de Configuração de Pinos do ADS7824PB 28-pin plastic dip
Configuração de pinos para ADS7824PB (pacote 28-pin plastic dip). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para ADS7824PB.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADS7824PB é adequado para 6 aplicaçãos: Industrial Process Monitoring, Laboratory Data Acquisition, Automated Test Equipment, PLC Analog Input Module, Embedded Control System, Power Supply and System Diagnostics.
Industrial Process Monitoring
The ADS7824PB fits four-channel industrial monitoring because it combines a 12-bit conversion resolution with a standard ±10 V bipolar input range and 25 µs maximum sampling-and-conversion time. Its four-input multiplexer reduces the number of separate converter circuits required when monitoring pressure, temperature, position, or analog controller signals. The laser-trimmed scaling network provides ±0.1 % channel-to-channel matching, which helps preserve consistency across process channels. Use protected inputs, suitable filtering, and a single +5 V supply arrangement; maximum power dissipation is 50 mW, keeping auxiliary thermal requirements manageable in compact industrial equipment.
Recomendado
Laboratory Data Acquisition
The ADS7824PB is useful for laboratory data-acquisition systems that must capture several bipolar analog channels with a 12-bit ADC. Its ±10 V range accommodates many sensor and amplifier outputs without changing the external scaling range, while the 25 µs maximum conversion time supports responsive multichannel sampling. The internal sample-and-hold, clock, reference, and multiplexer reduce system complexity, and the parallel or serial interface permits connection to different controller architectures. Designers should add appropriate anti-alias filtering, isolate high-impedance sources, and account for source settling time before selecting the next conversion interval.
Recomendado
Automated Test Equipment
The ADS7824PB can serve as the analog measurement front end in automated test equipment that evaluates several ±10 V test points. Its four-channel multiplexer permits sequential measurement without four complete converter assemblies, and the 12-bit result provides 4096 digital codes across the full-scale conversion range. The 25 µs maximum sampling-and-conversion time supports short test-cycle measurements, while parallel output can simplify attachment to a suitable processor and serial output can reduce connector wiring. Keep relay or switching networks away from sensitive inputs and provide filtering that preserves the converter’s stated nonlinearity and channel-matching performance.
Recomendado
PLC Analog Input Module
The ADS7824PB is appropriate for a PLC-oriented analog input module requiring four bipolar inputs, 12-bit resolution, and a single +5 V supply. The ±10 V range maps directly onto common industrial signal limits, and the 25 µs maximum conversion time allows the module to refresh multiple channels efficiently. Parallel or serial microprocessor outputs provide flexibility between a central processor and a local controller. Signal conditioning must handle transient overvoltage, source impedance, and grounding before the ADS7824PB inputs, while the maximum 50 mW device dissipation helps maintain compact, low-power module designs.
Recomendado
Embedded Control System
The ADS7824PB supports embedded controllers that need to supervise up to four analog channels rather than operate only as a digital system. Its integrated multiplexer, sample-and-hold stage, reference, and clock reduce external analog infrastructure, while 12-bit resolution and ±0.1 % channel matching suit supervisory control and diagnostic measurements. The serial interface can minimize wiring to a microcontroller, whereas the parallel interface can suit a processor with a suitable data bus. Firmware should calibrate gain and offset, reject invalid channel codes, and sequence acquisitions so the selected source has adequate settling time before sampling.
Recomendado
Power Supply and System Diagnostics
The ADS7824PB can monitor several bipolar system rails or diagnostic outputs in industrial power-control equipment. The ±10 V input range covers many scaled supply measurements, while the four-channel multiplexer permits sequential supervision with a single 12-bit converter. A 25 µs maximum conversion time gives sufficient responsiveness for supervisory loops that do not require waveform-level accuracy, and maximum power dissipation of 50 mW limits the converter’s thermal contribution. Accurate results still depend on divider tolerances, input protection, reference stability, and a layout that keeps high-current switching nodes separate from the analog input traces.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADS7824PB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADS7824P | ADS7825P |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin plastic DIP | 28-pin plastic DIP | 28-pin plastic DIP |
| ADC Architecture | Successive-approximation ADC | Successive-approximation ADC | Successive-approximation ADC |
| Resolution | 12 bit | 12 bit | 16 bit |
Principais diferenciais
- Provides the specified 12-bit resolution within the original ADS7824 family (vs ADS7825P)
- Combines four analog channels with a 25 µs maximum conversion time (vs ADS7824P)
- Uses laser-trimmed scaling for a standard industrial input range (vs ADS7825P)
Notas de projeto
Treat the four analog inputs as high-impedance measurement nodes. Place input-series resistance, clamping protection, and filtering close to the converter, and return filter currents through a quiet analog-ground path. The multiplexer must settle to the selected channel before conversion, so validate the external source impedance and capacitor values against the sampling network described in the manufacturer datasheet.
Separate analog input traces from digital clock and data routes to reduce conversion errors. Keep the 28-pin DIP in a through-hole layout consistent with the package drawing, provide local supply bypassing at the appropriate pins, and avoid routing switching-regulator outputs beneath the converter. A continuous ground strategy is especially important when the measured sources are referenced to systems with substantial ground potential differences.
Do not assume that a pin-compatible replacement is automatically interchangeable in software. ADS7824PB provides 12-bit results, while the pin-compatible ADS7825 family provides 16-bit results, changing code range, scaling, noise behavior, and possibly conversion timing. Confirm the exact ordering suffix, package, temperature grade, electrical limits, interface timing, and calibration routine before substituting either alternative.
Use a stable, low-noise +5 V source and place the recommended bypass network close to the supply pins. Maximum device power dissipation is 50 mW, but accuracy also depends on reference and supply behavior. Avoid sharing narrow supply paths with motors, relays, or other high-current loads, and verify the analog input range against the supply condition used in the final circuit.
Informações de conformidade
The component is an industrial ADC; no automotive qualification claim is made. Compliance declarations require confirmation from the manufacturer or the exact ordering documentation.