Texas Instruments

ADS7852Y/2K - 12-Bit 8-Channel 500 kSPS ADC | Texas Instruments

Артикул: ADS7852Y/2K ✓ Активен
2.5 V Vdss 32-pin TQFP (PBS), 5 mm × 5 mm Package
MOQ: 1 |

ADS7852Y/2K Обзор

Texas Instruments ADS7852Y/2K is a 12-bit, 8-channel, successive-approximation analog-to-digital converter with a 500 kSPS throughput rate, internal 2.5 V reference, and full 12-bit parallel output interface. The device is packaged in a 32-pin TQFP (PBS) package and accepts analog inputs from 0 V to twice the reference voltage, giving a nominal 0 V to 5 V input range.

An ADC is a data-conversion IC that converts continuously varying analog voltages into numeric values for processing, measurement, or control. The ADS7852 belongs to the SAR ADC family, where a successive-approximation conversion cycle repeatedly tests internal capacitor voltages against the sampled input. This architecture provides deterministic conversion timing and works effectively when several channels must be digitized at moderate speed.

The converter combines eight single-ended analog inputs with sample-and-hold circuits, a 2.5 V internal reference, and 12 parallel output lines. Typical power dissipation is 13 mW at a 500 kSPS throughput rate. Nap and sleep operating modes reduce power consumption to 2 mW, making the device useful in multiplexed industrial, instrumentation, and control systems that do not require continuous maximum-rate conversion.

Its parallel interface exposes all 12 conversion bits simultaneously, which can simplify connection to an FPGA, CPLD, or other digital acquisition logic. The 500 kSPS aggregate throughput supports approximately 62.5 kSPS per channel when all eight inputs are scanned continuously. System timing must account for acquisition, conversion, output settling, and the interval between successive conversions so every parallel bus capture corresponds to the intended channel.

Typical applications include factory data acquisition, process-control instrumentation, multichannel sensor measurement, industrial monitoring, and laboratory signal capture. Eight integrated inputs reduce the need for separate analog multiplexing circuitry, while the internal reference allows a self-contained measurement chain when precision requirements permit the fixed 2.5 V reference.

PCB design should provide a continuous ground plane, short analog traces, and local decoupling close to the supply pins. Analog and digital return currents should remain separated to minimize coupling from the 12-bit output bus into the input circuitry. Use the manufacturer datasheet pin-description table and recommended application circuit when assigning tracks, supplying reference bypass capacitance, and defining conversion-control timing.

This page combines the manufacturer specifications with practical interface, layout, application, and replacement guidance. It also identifies the exact package and operating characteristics engineers need when designing a parallel-output data-acquisition channel or deciding whether an alternative offers true pin-to-pin compatibility.

Аналоги без доработки для ADS7852Y/2K — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Для этого товара нет аналогов без доработки.

Запросить аналоги

ADS7852Y/2K Максимальные параметры и электрические характеристики

Converter Type Successive-approximation ADC (SAR)
Разрешение 12 bit
Number of Input Channels 8 channels
Throughput Rate 500 kSPS
Output Interface 12-bit parallel
Internal Reference Voltage 2.5 V
Analog Input Range 0 V to 2 × VREF, nominally 0 V to 5 V
Sample-and-Hold Function Internal, one per analog input
Typical Power Dissipation 13 mW at 500 kSPS
Reduced Power Consumption 2 mW in nap or sleep mode
Power Management Modes Nap mode and sleep mode
Корпус 32-pin TQFP (PBS), 5 mm × 5 mm
Тип монтажа Surface mount
Диапазон рабочих температур -40 °C to +85 °C
Terminal Count 32 terminals

Руководство по цоколевке ADS7852Y/2K в корпусе 32-pin tqfp (pbs), 5 mm × 5 mm

Цоколевка для ADS7852Y/2K (корпус 32-pin tqfp (pbs), 5 mm × 5 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 32-pin tqfp (pbs), 5 mm × 5 mm для ADS7852Y/2K

Нет подробных данных о распиновке для ADS7852Y/2K.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ADS7852Y/2K подходит для 6 применениеs: Industrial Process Measurement, Factory Data-Acquisition Systems, Multichannel Sensor Interface, Laboratory Signal Capture, Power and Equipment Monitoring, Embedded Control and Diagnostics.

🏭

Industrial Process Measurement

The ADS7852Y/2K fits multichannel process instrumentation that must acquire several analog sensor signals with limited external multiplexing. Its eight internal sample-and-hold channels, 12-bit resolution, and 500 kSPS aggregate throughput provide approximately 62.5 kSPS per channel during an eight-channel scan. The internal 2.5 V reference establishes a nominal 0 V to 5 V measurement range. In a controller, the parallel output can feed an FPGA or CPLD, although isolation, transducer excitation, protection, and calibration must be designed separately.

🏭

Factory Data-Acquisition Systems

The ADS7852Y/2K is useful in factory test equipment that gathers several analog channels during each production cycle. Eight integrated sample-and-hold inputs reduce the number of external analog switches, while 500 kSPS aggregate throughput supports fast scanning of transducers, potentiometers, and control feedback. The 12-bit parallel bus can be captured directly by digital control logic when its timing is coordinated with conversion commands. Nap and sleep modes can reduce the typical power draw from 13 mW toward 2 mW during inactive intervals.

🧩

Multichannel Sensor Interface

The ADS7852Y/2K supports acquisition from multiple low-bandwidth sensors whose outputs fit within the nominal 0 V to 5 V input range. Eight sample-and-hold channels allow the converter to capture related measurements without a separate analog multiplexer, and the internal 2.5 V reference simplifies front-end referencing. Designers should add conditioning, filtering, and input protection where sensor outputs exceed those limits. Parallel digital routing should be kept short and controlled to avoid introducing acquisition error at the converter input.

🔧

Laboratory Signal Capture

The ADS7852Y/2K can form the acquisition front end of a compact laboratory instrument that records several slowly changing or medium-speed analog signals. Its 12-bit resolution, eight channels, and 500 kSPS throughput provide a practical balance between measurement granularity and data volume. The full parallel interface can simplify capture in FPGA-based test equipment, while the internal reference avoids an external reference circuit. For low-level signals, separate buffer and gain stages remain necessary because the ADC input range is 0 V to 5 V.

⚡

Power and Equipment Monitoring

The ADS7852Y/2K is suitable for monitoring several slow power-system or equipment parameters, including scaled voltages and temperature-sensor outputs. Eight channels permit synchronized sampling of related operating conditions, while the 500 kSPS aggregate rate provides ample margin for supervisory measurements. A parallel-output FPGA can calculate thresholds and report system status without serial-interface overhead. Each input still requires scaling, filtering, and appropriate isolation where the measured circuit is not referenced to the converter ground.

🖥️

Embedded Control and Diagnostics

The ADS7852Y/2K can serve as the measurement engine in an embedded controller that evaluates analog health signals, actuator feedback, or configurable test points. Its eight channels reduce wiring overhead, and nap mode supports intermittent diagnostics without keeping the converter active continuously. The 32-pin TQFP (PBS) package remains physically substantial, so the design should reserve adequate routing area for the 12-bit output bus and clean analog routing. Control firmware must honor the conversion sequence and parallel-output timing documented by the manufacturer.

What are the key specifications of ADS7852Y/2K that engineers should know?
The ADS7852Y/2K is a 12-bit, 8-channel SAR ADC that supports 500 kSPS throughput and uses a 12-bit parallel output interface. According to the Texas Instruments ADS7852 datasheet, it includes eight sample-and-hold inputs, a 2.5 V internal reference, and an input range from 0 V to twice the reference voltage. The device is packaged in a 32-pin TQFP (PBS) package and operates from -40 °C to +85 °C.
What is the operating voltage range of ADS7852Y/2K?
The ADS7852Y/2K operates from the supply voltages specified for the 32-pin TQFP device, while its analog input range is 0 V to 2 times the 2.5 V internal reference. According to the Texas Instruments ADS7852 datasheet, that produces a nominal 0 V to 5 V input range. The exact supply-voltage limits and absolute maximum ratings should be taken from the manufacturer pin-description and electrical-characteristics tables.
How fast is the ADS7852Y/2K ADC?
The ADS7852Y/2K supports 500 kSPS aggregate throughput. According to the Texas Instruments ADS7852 datasheet, the converter uses a successive-approximation architecture and includes internal sample-and-hold circuits for its eight inputs. With all eight channels scanned continuously, the ideal average rate is approximately 62.5 kSPS per channel, although practical timing also includes acquisition, output-capture, and control overhead.
Does ADS7852Y/2K have an internal voltage reference?
Yes, the ADS7852Y/2K contains a 2.5 V internal reference. According to the Texas Instruments ADS7852 datasheet, the reference supports an analog input range extending from 0 V to twice the reference voltage, producing a nominal 0 V to 5 V range. This internal reference simplifies measurement designs that do not require an externally adjustable or higher-precision voltage reference.
What interface does ADS7852Y/2K use?
The ADS7852Y/2K uses a full 12-bit parallel output interface. According to the Texas Instruments ADS7852 datasheet, all 12 converted bits are presented in parallel rather than through a serial data link. This interface can suit FPGA, CPLD, or high-speed digital acquisition circuitry, provided the receiving logic captures the bus at the specified conversion and output timing.
How much power does ADS7852Y/2K consume?
Typical power dissipation is 13 mW when the ADS7852Y/2K operates at 500 kSPS throughput. According to the Texas Instruments ADS7852 datasheet, nap mode and sleep mode reduce power consumption to 2 mW. These lower-power states are useful for intermittent acquisition systems that can suspend conversion between measurement bursts while retaining the eight-channel input architecture.
Where can I download the ADS7852Y/2K datasheet PDF?
The official ADS7852Y/2K documentation is available through the Texas Instruments ADS7852 product page at https://www.ti.com/product/ADS7852 and the orderable-parts page at https://www.ti.com/product/ADS7852/part-details/ADS7852Y/2K. According to the manufacturer product documentation, use the datasheet for the pin description, electrical characteristics, timing diagrams, reference circuit, and recommended layout.
Where can I find the ADS7852Y/2K pinout?
The ADS7852Y/2K pinout is documented in the Texas Instruments ADS7852 datasheet and corresponds to its 32-pin TQFP (PBS) package. According to the manufacturer package information, the device has 32 terminals in a 5 mm × 5 mm surface-mount package. Use the datasheet pin-description table to assign analog inputs, digital data lines, control signals, reference connections, and supply pins.
Is ADS7852Y/2K suitable for multichannel sensor measurement?
Yes, the ADS7852Y/2K is suitable for multichannel sensor measurement because it combines eight analog inputs with internal sample-and-hold circuits and a 500 kSPS aggregate conversion rate. According to the Texas Instruments ADS7852 datasheet, the internal 2.5 V reference also supports a self-contained 0 V to 5 V measurement range. Sensor excitation, scaling, filtering, and grounding must be designed separately.
When should I choose ADS7852Y/2K instead of a serial-output ADC?
Choose the ADS7852Y/2K when the design benefits from eight channels, 12-bit resolution, and a simultaneous 12-bit parallel bus. According to the Texas Instruments ADS7852 datasheet, its 500 kSPS throughput and internal sample-and-hold circuits are appropriate for moderate-speed acquisition. A serial ADC may be preferable when connector pins, PCB routing, or clocked data capture are more restrictive than parallel-bus implementation.
ADS7852Y/2K vs ADS7851Y/2K - which is better for parallel data acquisition?
The ADS7852Y/2K and ADS7851Y/2K belong to the same Texas Instruments 8-channel, 12-bit parallel ADC family, but their exact performance and pin assignments must be checked before substitution. The ADS7852Y/2K has 500 kSPS throughput according to its manufacturer datasheet. Select ADS7852Y/2K when that conversion rate is required; otherwise compare resolution, timing, input range, and the complete pin table.
When should I choose ADS7852Y/2K over ADS7853Y/2K?
Choose ADS7852Y/2K when 500 kSPS aggregate throughput is important, because that is the converter's published maximum rate. The ADS7853Y/2K belongs to the same 8-channel, 12-bit parallel ADC family but is associated with a lower throughput class. Verify supply voltage, timing, control logic, and every package pin in the manufacturer datasheet before treating either part as a substitute.
What is the best drop-in replacement for ADS7852Y/2K?
A genuine drop-in replacement for ADS7852Y/2K must use the same 32-pin TQFP (PBS) footprint, preserve pin-to-pin signal assignments, and maintain comparable key specifications, including 12-bit resolution, eight channels, 500 kSPS throughput, 2.5 V reference, and 0 V to 5 V input range. According to the Texas Instruments ADS7852 datasheet, interface timing and control polarity also have to match. No replacement should be approved from a family-level cross-reference alone.
Can another manufacturer provide a direct ADS7852Y/2K replacement?
A cross-brand replacement is acceptable only after its 32-pin TQFP land pattern and complete pinout are proven equivalent to the ADS7852Y/2K. It must also preserve 12-bit resolution, eight input channels, parallel output timing, 500 kSPS throughput, reference behavior, supply limits, and input range. According to the Texas Instruments ADS7852 datasheet, package dimensions and timing alone are not sufficient; functional equivalence must be verified.
Where to buy ADS7852Y/2K online and what is its lead time?
Use the Request a Quote form on this page to ask for ADS7852Y/2K availability, current lead time, minimum order quantity, and authorized supply. The manufacturer identifies ADS7852Y/2K as a 32-pin TQFP (PBS) ordering variant with a -40 °C to +85 °C temperature range. A firm production schedule and quantity confirmation should be obtained before committing the device to a new PCB build.

Справочные инженерные данные для ADS7852Y/2K — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ADS7852Y/2K when a design needs eight simultaneously selectable analog channels, 12-bit resolution, and 500 kSPS aggregate SAR conversion with a full parallel output. It is especially suitable for industrial measurement, test equipment, and embedded acquisition systems where an FPGA or CPLD can capture the 12-bit bus efficiently. Choose a serial-output ADC when connector count, PCB routing, or clocked data transfer is more important than parallel capture. Consider lower-channel-count devices when fewer signals require conversion and board area is constrained. Any proposed substitute must preserve the 32-pin TQFP (PBS) land pattern, pin-to-pin control behavior, reference arrangement, timing, and electrical limits; package similarity alone is not sufficient. Because no alternative in the supplied cross-reference results is confirmed as a true drop-in replacement, validate any substitution against the manufacturer datasheet and application circuit before releasing a production design.

Сравнение с аналогами

Параметр Этот товар
Package 32-pin TQFP (PBS), 5 mm × 5 mm
Brand Texas Instruments
Resolution 12 bit
Input Channels 8 channels
Throughput Rate 500 kSPS
Converter Architecture Successive approximation (SAR)
Internal Reference 2.5 V
Analog Input Range 0 V to 2 × VREF, nominally 0 V to 5 V
Output Interface Full 12-bit parallel output
Power Dissipation 13 mW typical at 500 kSPS; 2 mW in nap or sleep mode
Operating Temperature -40 °C to +85 °C

Ключевые отличия

  • Eight-channel integration reduces external analog multiplexing (против ADS7851Y/2K)
  • Parallel output reduces digital capture complexity (против ADS7883Y/2K)
  • Moderate-rate conversion supports continuous multichannel scanning (против ADS7841Y/2K)

Заметки по проектированию

Keep the eight analog inputs away from the 12 parallel output traces and place analog ground connections using a continuous ground plane. Route each analog input as a short trace directly to its assigned pin, with input conditioning components close to the converter. The parallel bus should connect to the receiving digital device without unnecessary stubs, because fast output edges can couple into adjacent high-impedance analog nodes.

Place the manufacturer-recommended supply bypass capacitors immediately beside the relevant supply and ground pins. Use the ADS7852 datasheet application circuit for capacitor type, capacitance, and placement rather than substituting an arbitrary network. Keep the analog and digital supply return paths controlled, and verify acquisition accuracy across the intended supply tolerance because reference and converter performance can vary with supply conditions.

Do not treat the 500 kSPS specification as a guaranteed conversion rate for every channel under all timing conditions. Conversion-command latency, acquisition time, parallel-output settling, and digital bus capture must be coordinated according to the manufacturer timing diagrams. In an eight-channel scan, confirm that the selected sample rate satisfies the signal bandwidth and that the receiving logic identifies the channel associated with each captured 12-bit word.

Use a continuous, low-impedance ground reference and return digital output current away from sensitive input traces. If the analog signals have high source impedance, add local buffering and charge-injection or acquisition-settling analysis rather than relying on the ADC sample-and-hold alone. For sensors near the upper input limit, include headroom and transient protection without adding excessive capacitance that could prevent the internal acquisition network from settling.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The -40 °C to +85 °C industrial temperature range is identified by the product listing. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the manufacturer information used for this record.

Данные проверены: 2026-11-18 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ADS7852Y/2K datasheet ADS7852Y/2K specifications ADS7852Y/2K pinout ADS7852Y/2K datasheet pdf ADS7852Y/2K application circuit ADS7852Y/2K equivalent ADS7852Y/2K replacement ADS7852Y/2K cross reference Texas Instruments ADS7852Y/2K ADS7852Y/2K 32 pin TQFP ADS7852Y/2K 500 kSPS ADC ADS7852Y/2K price ADS7852Y/2K stock ADS7852Y/2K schematic ADS7852Y/2K vs ADS7851Y/2K

Связанные компоненты & термины

Texas Instruments ADS7852Y/2K ADS7852 ADS7851Y/2K ADS7853Y/2K ADS7883Y/2K ADS7841Y/2K analog-to-digital converter ADC successive-approximation ADC SAR ADC data-conversion IC 12-bit resolution 500 kSPS throughput parallel output interface internal voltage reference 2.5 V reference sample and hold input multiplexer nap mode sleep mode 32-pin TQFP PBS package QFP family surface-mount package industrial instrumentation multichannel sensor measurement factory data acquisition FPGA CPLD
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ