ADS7852Y/2K - 12-Bit 8-Channel 500 kSPS ADC | Texas Instruments
MPN: ADS7852Y/2K ✓ Hoạt độngADS7852Y/2K Tóm tắt
An ADC is a data-conversion IC that converts continuously varying analog voltages into numeric values for processing, measurement, or control. The ADS7852 belongs to the SAR ADC family, where a successive-approximation conversion cycle repeatedly tests internal capacitor voltages against the sampled input. This architecture provides deterministic conversion timing and works effectively when several channels must be digitized at moderate speed.
The converter combines eight single-ended analog inputs with sample-and-hold circuits, a 2.5 V internal reference, and 12 parallel output lines. Typical power dissipation is 13 mW at a 500 kSPS throughput rate. Nap and sleep operating modes reduce power consumption to 2 mW, making the device useful in multiplexed industrial, instrumentation, and control systems that do not require continuous maximum-rate conversion.
Its parallel interface exposes all 12 conversion bits simultaneously, which can simplify connection to an FPGA, CPLD, or other digital acquisition logic. The 500 kSPS aggregate throughput supports approximately 62.5 kSPS per channel when all eight inputs are scanned continuously. System timing must account for acquisition, conversion, output settling, and the interval between successive conversions so every parallel bus capture corresponds to the intended channel.
Typical applications include factory data acquisition, process-control instrumentation, multichannel sensor measurement, industrial monitoring, and laboratory signal capture. Eight integrated inputs reduce the need for separate analog multiplexing circuitry, while the internal reference allows a self-contained measurement chain when precision requirements permit the fixed 2.5 V reference.
PCB design should provide a continuous ground plane, short analog traces, and local decoupling close to the supply pins. Analog and digital return currents should remain separated to minimize coupling from the 12-bit output bus into the input circuitry. Use the manufacturer datasheet pin-description table and recommended application circuit when assigning tracks, supplying reference bypass capacitance, and defining conversion-control timing.
This page combines the manufacturer specifications with practical interface, layout, application, and replacement guidance. It also identifies the exact package and operating characteristics engineers need when designing a parallel-output data-acquisition channel or deciding whether an alternative offers true pin-to-pin compatibility.
Bộ thay thế dễ dàng lắp đặt cho ADS7852Y/2K — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếADS7852Y/2K Tỷ lệ tối đa & tính chất điện
| Converter Type | Successive-approximation ADC (SAR) |
| Độ phân giải | 12 bit |
| Number of Input Channels | 8 channels |
| Throughput Rate | 500 kSPS |
| Output Interface | 12-bit parallel |
| Internal Reference Voltage | 2.5 V |
| Analog Input Range | 0 V to 2 × VREF, nominally 0 V to 5 V |
| Sample-and-Hold Function | Internal, one per analog input |
| Typical Power Dissipation | 13 mW at 500 kSPS |
| Reduced Power Consumption | 2 mW in nap or sleep mode |
| Power Management Modes | Nap mode and sleep mode |
| Hộp | 32-pin TQFP (PBS), 5 mm × 5 mm |
| Kiểu lắp đặt | Surface mount |
| Khoảng nhiệt độ hoạt động | -40 °C to +85 °C |
| Terminal Count | 32 terminals |
Hướng dẫn cấu hình chân ADS7852Y/2K 32-pin tqfp (pbs), 5 mm × 5 mm
Cấu hình chân cho ADS7852Y/2K (32-pin tqfp (pbs), 5 mm × 5 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho ADS7852Y/2K.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADS7852Y/2K phù hợp cho 6 Áp dụngs: Industrial Process Measurement, Factory Data-Acquisition Systems, Multichannel Sensor Interface, Laboratory Signal Capture, Power and Equipment Monitoring, Embedded Control and Diagnostics.
Industrial Process Measurement
The ADS7852Y/2K fits multichannel process instrumentation that must acquire several analog sensor signals with limited external multiplexing. Its eight internal sample-and-hold channels, 12-bit resolution, and 500 kSPS aggregate throughput provide approximately 62.5 kSPS per channel during an eight-channel scan. The internal 2.5 V reference establishes a nominal 0 V to 5 V measurement range. In a controller, the parallel output can feed an FPGA or CPLD, although isolation, transducer excitation, protection, and calibration must be designed separately.
Factory Data-Acquisition Systems
The ADS7852Y/2K is useful in factory test equipment that gathers several analog channels during each production cycle. Eight integrated sample-and-hold inputs reduce the number of external analog switches, while 500 kSPS aggregate throughput supports fast scanning of transducers, potentiometers, and control feedback. The 12-bit parallel bus can be captured directly by digital control logic when its timing is coordinated with conversion commands. Nap and sleep modes can reduce the typical power draw from 13 mW toward 2 mW during inactive intervals.
Multichannel Sensor Interface
The ADS7852Y/2K supports acquisition from multiple low-bandwidth sensors whose outputs fit within the nominal 0 V to 5 V input range. Eight sample-and-hold channels allow the converter to capture related measurements without a separate analog multiplexer, and the internal 2.5 V reference simplifies front-end referencing. Designers should add conditioning, filtering, and input protection where sensor outputs exceed those limits. Parallel digital routing should be kept short and controlled to avoid introducing acquisition error at the converter input.
Laboratory Signal Capture
The ADS7852Y/2K can form the acquisition front end of a compact laboratory instrument that records several slowly changing or medium-speed analog signals. Its 12-bit resolution, eight channels, and 500 kSPS throughput provide a practical balance between measurement granularity and data volume. The full parallel interface can simplify capture in FPGA-based test equipment, while the internal reference avoids an external reference circuit. For low-level signals, separate buffer and gain stages remain necessary because the ADC input range is 0 V to 5 V.
Power and Equipment Monitoring
The ADS7852Y/2K is suitable for monitoring several slow power-system or equipment parameters, including scaled voltages and temperature-sensor outputs. Eight channels permit synchronized sampling of related operating conditions, while the 500 kSPS aggregate rate provides ample margin for supervisory measurements. A parallel-output FPGA can calculate thresholds and report system status without serial-interface overhead. Each input still requires scaling, filtering, and appropriate isolation where the measured circuit is not referenced to the converter ground.
Embedded Control and Diagnostics
The ADS7852Y/2K can serve as the measurement engine in an embedded controller that evaluates analog health signals, actuator feedback, or configurable test points. Its eight channels reduce wiring overhead, and nap mode supports intermittent diagnostics without keeping the converter active continuously. The 32-pin TQFP (PBS) package remains physically substantial, so the design should reserve adequate routing area for the 12-bit output bus and clean analog routing. Control firmware must honor the conversion sequence and parallel-output timing documented by the manufacturer.
Dữ liệu tham khảo kỹ thuật cho ADS7852Y/2K — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 32-pin TQFP (PBS), 5 mm × 5 mm |
| Brand | Texas Instruments |
| Resolution | 12 bit |
| Input Channels | 8 channels |
| Throughput Rate | 500 kSPS |
| Converter Architecture | Successive approximation (SAR) |
| Internal Reference | 2.5 V |
| Analog Input Range | 0 V to 2 × VREF, nominally 0 V to 5 V |
| Output Interface | Full 12-bit parallel output |
| Power Dissipation | 13 mW typical at 500 kSPS; 2 mW in nap or sleep mode |
| Operating Temperature | -40 °C to +85 °C |
Bảo phân biệt quan trọng
- Eight-channel integration reduces external analog multiplexing (vsADS7851Y/2K)
- Parallel output reduces digital capture complexity (vsADS7883Y/2K)
- Moderate-rate conversion supports continuous multichannel scanning (vsADS7841Y/2K)
Ghi chú thiết kế
Keep the eight analog inputs away from the 12 parallel output traces and place analog ground connections using a continuous ground plane. Route each analog input as a short trace directly to its assigned pin, with input conditioning components close to the converter. The parallel bus should connect to the receiving digital device without unnecessary stubs, because fast output edges can couple into adjacent high-impedance analog nodes.
Place the manufacturer-recommended supply bypass capacitors immediately beside the relevant supply and ground pins. Use the ADS7852 datasheet application circuit for capacitor type, capacitance, and placement rather than substituting an arbitrary network. Keep the analog and digital supply return paths controlled, and verify acquisition accuracy across the intended supply tolerance because reference and converter performance can vary with supply conditions.
Do not treat the 500 kSPS specification as a guaranteed conversion rate for every channel under all timing conditions. Conversion-command latency, acquisition time, parallel-output settling, and digital bus capture must be coordinated according to the manufacturer timing diagrams. In an eight-channel scan, confirm that the selected sample rate satisfies the signal bandwidth and that the receiving logic identifies the channel associated with each captured 12-bit word.
Use a continuous, low-impedance ground reference and return digital output current away from sensitive input traces. If the analog signals have high source impedance, add local buffering and charge-injection or acquisition-settling analysis rather than relying on the ADC sample-and-hold alone. For sensors near the upper input limit, include headroom and transient protection without adding excessive capacitance that could prevent the internal acquisition network from settling.
Thông tin tuân thủ
The -40 °C to +85 °C industrial temperature range is identified by the product listing. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the manufacturer information used for this record.