Analog Devices

ADV7403BSTZ-110 - 12-Bit 110 MHz Video Decoder | Analog Devices

Артикул: ADV7403BSTZ-110 ✗ Снят с производства
100-lead LQFP Package 110 MHz Speed
MOQ: 1 |

ADV7403BSTZ-110 Обзор

The Analog Devices ADV7403BSTZ-110 is a 12-bit, integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer with a 110 MHz sampling speed, support for PAL, NTSC, and SECAM composite or S-Video inputs, and serial ITU-R BT.656 output. The device is supplied in a 100-lead, 14 mm × 14 mm RoHS-compliant LQFP package and operates over the industrial temperature range of -40°C to +85°C.

A video decoder is an interface IC that converts legacy analog video signals into a digital pixel stream for processing, display, capture, or transmission. The ADV7403 belongs to the broader video-processing IC hierarchy and combines four noise-shaped 12-bit ADCs, a 12-channel analog input multiplexer, analog video decoding, and digital output formatting in one package. Its BT.656 output provides a conventional parallel digital-video interface for downstream processors and display controllers.

Key capabilities include 12-bit video digitization, four noise-shaped video ADCs, a 12-channel analog input multiplexer, SCART fast-blank support, and multiformat decoding for PAL, NTSC, and SECAM. The -110 speed grade supports operation to 110 MHz, while a separate 140 MHz grade is identified as ADV7403KST-140. These distinctions are important because sampling speed affects supported signal bandwidth and timing margin.

The integrated conversion path reduces the number of discrete analog-to-digital and decoding functions required for legacy video ingestion. Composite and S-Video sources can be selected through the analog input multiplexer and converted into digital ITU-R BT.656 data. Digital pixel data may then be routed to an FPGA, processor, scaler, capture controller, or video processor without requiring a separate external video decoder for these supported formats.

Typical uses include industrial video inspection, professional broadcast and surveillance equipment, video capture cards, legacy media conversion, test and measurement systems, and embedded video-processing equipment. The device is most appropriate where PAL, NTSC, or SECAM analog sources must become digital video while preserving a defined 12-bit conversion path and standardized serial output.

Layout should follow the manufacturer's pin-description table and recommended decoupling arrangement because this 100-pin mixed-signal LQFP contains high-speed digital outputs alongside sensitive analog inputs. Keep analog and digital return paths controlled, place bypass capacitors close to their supply pins, and treat the exposed analog and digital interfaces according to the pin table rather than assuming identical routing requirements.

This page combines manufacturer-device facts, lifecycle status, source links, parameter comparisons, and practical replacement guidance. It also distinguishes the 110 MHz grade from the 140 MHz ADV7403KST-140 option and identifies the limitations of using an ADV7401 or ADV7510 as a direct drop-in replacement.

Аналоги без доработки для ADV7403BSTZ-110 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ADV7403BSTZ-110 (тот же форм-фактор и посадочное место) — отличается по ADC Resolution, Package, Digital Output Format, RoHS Status.

Analog Devices
ADC Resolution: 10 bit
Package: 100-lead LQFP, 14 mm x 14 mm
Digital Output Format: ITU-R BT.656
Сравнить с ADV7403BSTZ-110 →
Analog Devices
ADC Resolution: 12-bit
Package: 100-LQFP, 14 x 14 mm
RoHS Status: Compliant
Сравнить с ADV7403BSTZ-110 →

ADV7403KSTZ-140

✅ Прямая замена
Analog Devices
📦 100-lead LQFP (14 mm × 14 mm)
12-bit integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer · PAL, NTSC, and SECAM composite or S-video · Serial ITU-R BT.656 · 12-bit · 4 · 140 MHz · 12 · Not required for multisource connection

Уточнить цену

Открыть даташит →

ADV7403KST-140

✅ Прямая замена
📦 100-lead LQFP (14 mm × 14 mm)
Maximum sampling speed is 140 MHz versus 110 MHz, a 27.3% increase; the exact ordering code and package suffix must be checked before substitution.

📋 Справочный аналог (нет в каталоге)

ADV7403BSTZ-110 Характеристики

Device Type Multiformat video decoder and RGB graphics digitizer
ADC Resolution 12 bit
Maximum Sampling Speed 110 MHz
Video ADC Count 4
Analog Input Multiplexer Channels 12
Supported Analog Formats PAL, NTSC, and SECAM
Supported Analog Inputs Composite and S-Video
Digital Output Format Serial ITU-R BT.656
Graphics Input Function RGB graphics digitizer
SCART Fast-Blank Support Supported
Диапазон рабочих температур -40°C to +85°C
Корпус 100-lead LQFP
Package Dimensions 14 mm × 14 mm
Статус RoHS RoHS compliant
Lifecycle Recommendation Not recommended for new designs
Product Family ADV7403
Speed-Grade Designator -110

Руководство по цоколевке ADV7403BSTZ-110 в корпусе 14 mm × 14 mm

Цоколевка для ADV7403BSTZ-110 (корпус 14 mm × 14 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 14 mm × 14 mm для ADV7403BSTZ-110

Нет подробных данных о распиновке для ADV7403BSTZ-110.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ADV7403BSTZ-110 подходит для 6 применениеs: Industrial Visual Inspection, Professional Video Monitoring, Legacy Media Conversion, Video Capture Cards, Broadcast Test Equipment, Security and Surveillance Retrofit.

🏭

Industrial Visual Inspection

The ADV7403BSTZ-110 fits legacy machine-vision systems that receive composite or S-Video from analog cameras and need a standardized digital output. Its four 12-bit noise-shaped ADCs, 12-channel analog multiplexer, and multiformat PAL/NTSC/SECAM decoding allow an acquisition subsystem to replace separate analog conversion stages. The resulting ITU-R BT.656 stream can connect to an FPGA or embedded processor for inspection analysis. The 110 MHz grade should be matched against the intended pixel rate, while the -40°C to +85°C range supports controlled industrial environments. Because the family is not recommended for new designs, production equipment should plan controlled substitution or board revision.

📺

Professional Video Monitoring

The ADV7403BSTZ-110 is appropriate for professional monitoring and broadcast-adjacent equipment that must ingest PAL, NTSC, or SECAM composite or S-Video. Its 12-bit digitization and integrated decoder produce ITU-R BT.656 pixel data for downstream scaling, recording, or display processing without a separate legacy-video decoder. The 12-channel analog multiplexer supports flexible source selection, while SCART fast-blank support can simplify compatible synchronization interfaces. Because the ADV7403 is not recommended for new designs, this device best serves established platforms with controlled production plans rather than newly launched broadcast products.

🖥️

Legacy Media Conversion

The ADV7403BSTZ-110 can serve as the conversion front end in equipment that transfers legacy analog video into a digital workflow. Composite and S-Video sources are decoded as PAL, NTSC, or SECAM and emitted as ITU-R BT.656 data for capture, storage, enhancement, or transcoding. Its integrated four-ADC, 12-bit architecture reduces the component count compared with a discrete digitizer and decoder approach. The 110 MHz grade is appropriate when the target resolution and pixel timing remain below the limits of the selected operating mode. Existing converter designs can benefit from the standardized digital interface, but new products should first assess whether a currently recommended interface IC would reduce redesign risk.

🎥

Video Capture Cards

For an expansion or capture card that accepts legacy analog video, the ADV7403BSTZ-110 provides a clear source-to-pixel-data path. The decoder handles PAL, NTSC, and SECAM composite or S-Video, digitizes the selected channel with the integrated 12-bit ADCs, and presents a serial ITU-R BT.656 interface to the FPGA or capture controller. This allows clocking, formatting, and pixel data to be handled digitally downstream. The 100-lead LQFP requires careful analog routing and multilayer decoupling, and its 110 MHz grade should not be confused with the 140 MHz ADV7403KST-140 option when planning maximum pixel-clock support.

🔧

Broadcast Test Equipment

The ADV7403BSTZ-110 is suitable for test equipment that needs to analyze or convert standard-definition analog video signals. Its support for PAL, NTSC, and SECAM provides broad legacy-format coverage, while the 12-bit digitizers and digital BT.656 output allow measured pixel data to be captured, displayed, or checked by programmable logic. SCART fast-blank support can assist systems using compatible synchronization signaling. For production instruments, the industrial temperature range supports controlled test environments. The not-for-new-designs designation should be addressed through a product-life review and a planned path to a supported decoder if the platform will remain in production for many years.

🧩

Security and Surveillance Retrofit

The ADV7403BSTZ-110 can support retrofit equipment that receives composite or S-Video from an installed analog surveillance camera and must provide digital video to a modern processor. Its PAL, NTSC, and SECAM decoding removes the need for a separate legacy-video front end, while the 12-bit ITU-R BT.656 output connects to downstream image processing or recording electronics. The 110 MHz sampling grade and industrial temperature range fit many controlled installations. Board-level integration still requires careful handling of analog noise, grounding, clocking, and synchronization. Because the family is not recommended for new designs, long-lived surveillance projects should require a lifecycle and availability commitment before deployment.

What is the ADV7403BSTZ-110?
The ADV7403BSTZ-110 is a 12-bit integrated multiformat video decoder and RGB graphics digitizer from Analog Devices. According to the manufacturer product page, it converts PAL, NTSC, and SECAM composite or S-Video signals into digital ITU-R BT.656 data, using a 110 MHz sampling speed in a 100-lead, 14 mm × 14 mm LQFP package.
What is the operating voltage of ADV7403BSTZ-110?
The ADV7403BSTZ-110 uses separate analog, digital, and PLL supply domains, but their exact operating and absolute-maximum voltage limits are not stated in the product information used for this page. Use the electrical-characteristics and pin-description tables in the manufacturer datasheet for the complete supply-voltage requirements before applying power to a new design.
Where can I download the ADV7403BSTZ-110 datasheet PDF?
The official ADV7403BSTZ-110 datasheet PDF is available from Analog Devices at the manufacturer data-sheet link on this page. It identifies the device as a 12-bit integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer, including the 110 MHz speed grade, package, pin descriptions, and electrical characteristics needed for schematic and layout work.
Where can I find the ADV7403BSTZ-110 pinout?
The ADV7403BSTZ-110 pinout is presented in the official ADV7403 datasheet under the pin-description and package-drawing sections. This is a 100-lead LQFP device, so the physical design must follow the datasheet's numbered package drawing, including power, ground, analog input, clock, control, and digital output assignments; do not infer pin functions from another ADV7403 package.
Is the ADV7403BSTZ-110 currently recommended for new designs?
No. Analog Devices marks the ADV7403 as not recommended for new designs. Existing industrial and professional video equipment can still use the ADV7403BSTZ-110 where its 110 MHz grade, legacy analog formats, and BT.656 interface match the system, but new platforms should evaluate the manufacturer's current video-decoder portfolio before committing the design.
What is the temperature range of ADV7403BSTZ-110?
The ADV7403BSTZ-110 operates over the industrial temperature range from -40°C to +85°C. Analog Devices identifies this package as RoHS compliant and distinguishes the -110 device from the faster 140 MHz ADV7403KST-140 grade, so temperature capability and maximum clock performance should be treated as separate selection criteria.
What video formats does ADV7403BSTZ-110 support?
The ADV7403BSTZ-110 supports PAL, NTSC, and SECAM composite and S-Video inputs and converts them to digital ITU-R BT.656 output. Its four noise-shaped 12-bit ADCs and 12-channel analog input multiplexer provide the analog front end for these legacy video formats, while the integrated decoder handles standard conversion to digital pixel data.
What is the difference between ADV7403BSTZ-110 and ADV7403KSTZ-140?
The primary documented difference is maximum sampling speed: the ADV7403BSTZ-110 is the 110 MHz grade, whereas ADV7403KST-140 is identified as the 140 MHz speed grade. Both belong to the ADV7403 multiformat decoder family and use the 100-lead LQFP format, but a 140 MHz part should not be selected solely as a speed substitute without checking every pin, supply, timing, and behavioral requirement.
Can ADV7403BSTZ-110 be used for S-Video capture?
Yes. The ADV7403BSTZ-110 explicitly supports composite and S-Video sources, making it suitable for converting S-Video into digital ITU-R BT.656 data. Use the datasheet's input-routing, impedance, filtering, and unused-pin guidance when implementing the analog front end, particularly because exposed analog inputs require careful grounding and return-path control.
What is the best drop-in replacement for ADV7403BSTZ-110?
No independently verified drop-in replacement can be identified from the available cross-reference information. The ADV7403KSTZ-140 is the closest same-family speed-grade option, but its 140 MHz rating is a different grade and must be fully validated before substitution. The ADV7401BSTZ-110 is a different decoder family member and should not be called a drop-in replacement without a complete pin and functional comparison.
What can replace ADV7403BSTZ-110?
The ADV7403KSTZ-140 is the only closely related candidate identified in the available family references, but it is a 140 MHz grade rather than an exact functional and grade match. For an existing ADV7403BSTZ-110 board, request an engineering review of the complete ADV7403 datasheet, including clocking, pin availability, digital output timing, supply sequencing, and analog input requirements.
Is ADV7403BSTZ-110 suitable for industrial video inspection equipment?
The ADV7403BSTZ-110 is suitable when industrial equipment accepts PAL, NTSC, or SECAM composite or S-Video and requires ITU-R BT.656 digital output. Its -40°C to +85°C industrial temperature range is appropriate for controlled industrial environments, while its not-for-new-designs status means long-term lifecycle planning and an alternate-source review remain important.
ADV7403BSTZ-110 vs ADV7401BSTZ-110: which decoder is better?
The ADV7403BSTZ-110 and ADV7401BSTZ-110 are both described as 100-LQFP SDTV/HDTV decoder ICs, but their feature sets are not proven identical by the available references. Choose ADV7403BSTZ-110 only when its four 12-bit noise-shaped ADCs, 12-channel analog multiplexer, SCART fast-blank support, and specified legacy-format coverage are required; otherwise compare the complete manufacturer tables.
How do I request a quote and lead time for ADV7403BSTZ-110?
Use the Request a Quote form on this page to request current commercial terms, stock status, minimum order quantity, and lead time for ADV7403BSTZ-110. Analog Devices identifies the ADV7403 family as not recommended for new designs, so a quotation should also identify the exact package suffix, quantity, date code, and whether the design can move to a supported alternative.
Is ADV7403BSTZ-110 in stock?
Current stock should be confirmed through the Request a Quote form on this page rather than inferred from a distributor search page. The official manufacturer product page states that ADV7403 is not recommended for new designs, so availability may be limited and lead time may vary with quantity, date code, and production status. Include the target annual volume with the request.

Справочные инженерные данные для ADV7403BSTZ-110 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ADV7403BSTZ-110 for an established design that accepts PAL, NTSC, or SECAM composite or S-Video and requires a 12-bit ITU-R BT.656 output at the 110 MHz grade. Its integrated four-ADC, 12-channel multiplexer, SCART fast-blank support, industrial temperature range, and 100-lead LQFP make it useful for industrial inspection, capture, monitoring, test, and legacy conversion equipment. Consider ADV7403KSTZ-140 only when the design can use the 140 MHz grade and every package, timing, clock, and ordering-code requirement is confirmed. Do not treat ADV7401BSTZ-110 or ADV7510BSTZ-225 as direct replacements: they are different decoder families whose feature sets and pin assignments require separate validation. Because Analog Devices marks ADV7403 as not recommended for new designs, select it primarily for maintenance and supported legacy platforms, and include lifecycle planning in every new production decision.

Сравнение с аналогами

Параметр Этот товар ADV7403KSTZ-140 ADV7403KST-140
Package 100-lead LQFP (14 mm × 14 mm) 100-lead LQFP (14 mm × 14 mm) 100-lead LQFP (14 mm × 14 mm)
Brand Analog Devices Analog Devices Analog Devices
Maximum Sampling Speed 110 MHz 140 MHz 140 MHz
Product Family ADV7403 ADV7403 ADV7403

Ключевые отличия

  • Integrated 12-bit multiformat conversion in one device (против ADV7403KSTZ-140)
  • Lower nominal sampling-speed grade (против ADV7403KSTZ-140)
  • Broad legacy analog-format coverage (против ADV7401BSTZ-110)

Заметки по проектированию

Treat the composite and S-Video inputs as sensitive high-impedance analog nodes. Route them away from the BT.656 outputs, clock signals, and switching-power nodes; keep return paths continuous under the inputs; and follow the recommended analog ground and reference arrangement in the manufacturer datasheet. Place input filtering and termination close to the source interface so that leakage and induced noise do not degrade the 12-bit conversion path.

Place every required bypass capacitor directly beside its associated supply and ground pins, with short, low-inductance connections and a solid ground plane. The ADV7403BSTZ-110 has separate digital, analog, and PLL-related supply domains, so do not assume that connecting the supply pins together on the schematic is sufficient. Follow the capacitor values, placement, and power-up sequence given in the datasheet and typical application circuit.

Route the serial ITU-R BT.656 clock and data as a controlled-impedance group on a multilayer board, and avoid stubs or test-point branches that are not part of the validated topology. Match trace lengths according to the source and destination clocking requirements, provide continuous reference planes, and account for connector and package parasitics when configuring the digital video link.

Do not treat the ADV7403KST-140 140 MHz grade as an unconditional drop-in replacement for the ADV7403BSTZ-110. Although both belong to the ADV7403 family and use the same 100-lead LQFP format, review ordering suffixes, clock limits, supply behavior, enable sequencing, exposed-pin treatment, and every unused or no-connect pin before approving a substitution.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer datasheet states that ADV7403BSTZ-110 is available in a RoHS-compliant 100-lead LQFP package. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ADV7403BSTZ-110 ADV7403BSTZ-110 datasheet ADV7403BSTZ-110 datasheet pdf ADV7403BSTZ-110 pinout ADV7403BSTZ-110 equivalent ADV7403BSTZ-110 replacement ADV7403BSTZ-110 price ADV7403BSTZ-110 stock Analog Devices ADV7403BSTZ-110 ADV7403BSTZ-110 LQFP-100 ADV7403BSTZ-110 vs ADV7403KSTZ-140 ADV7403BSTZ-110 video decoder ADV7403BSTZ-110 S-Video application What is the ADV7403BSTZ-110

Связанные компоненты & термины

Analog Devices ADV7403BSTZ-110 ADV7403KSTZ-140 ADV7403KST-140 ADV7401BSTZ-110 ADV7510BSTZ-225 Video decoder Video processing IC RGB graphics digitizer Video ADC Digital-to-analog interface Interface IC Semiconductor PAL NTSC SECAM Composite video S-Video ITU-R BT.656 12-bit ADC Noise-shaped ADC 110 MHz 140 MHz 100-lead LQFP 14 mm × 14 mm RoHS SCART fast blank
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ