ADV7403BSTZ-110 - 12-Bit 110 MHz Video Decoder | Analog Devices
料号: ADV7403BSTZ-110 ✗ 停产ADV7403BSTZ-110 概述
A video decoder is an interface IC that converts legacy analog video signals into a digital pixel stream for processing, display, capture, or transmission. The ADV7403 belongs to the broader video-processing IC hierarchy and combines four noise-shaped 12-bit ADCs, a 12-channel analog input multiplexer, analog video decoding, and digital output formatting in one package. Its BT.656 output provides a conventional parallel digital-video interface for downstream processors and display controllers.
Key capabilities include 12-bit video digitization, four noise-shaped video ADCs, a 12-channel analog input multiplexer, SCART fast-blank support, and multiformat decoding for PAL, NTSC, and SECAM. The -110 speed grade supports operation to 110 MHz, while a separate 140 MHz grade is identified as ADV7403KST-140. These distinctions are important because sampling speed affects supported signal bandwidth and timing margin.
The integrated conversion path reduces the number of discrete analog-to-digital and decoding functions required for legacy video ingestion. Composite and S-Video sources can be selected through the analog input multiplexer and converted into digital ITU-R BT.656 data. Digital pixel data may then be routed to an FPGA, processor, scaler, capture controller, or video processor without requiring a separate external video decoder for these supported formats.
Typical uses include industrial video inspection, professional broadcast and surveillance equipment, video capture cards, legacy media conversion, test and measurement systems, and embedded video-processing equipment. The device is most appropriate where PAL, NTSC, or SECAM analog sources must become digital video while preserving a defined 12-bit conversion path and standardized serial output.
Layout should follow the manufacturer's pin-description table and recommended decoupling arrangement because this 100-pin mixed-signal LQFP contains high-speed digital outputs alongside sensitive analog inputs. Keep analog and digital return paths controlled, place bypass capacitors close to their supply pins, and treat the exposed analog and digital interfaces according to the pin table rather than assuming identical routing requirements.
This page combines manufacturer-device facts, lifecycle status, source links, parameter comparisons, and practical replacement guidance. It also distinguishes the 110 MHz grade from the 140 MHz ADV7403KST-140 option and identifies the limitations of using an ADV7401 or ADV7510 as a direct drop-in replacement.
直接替换替代料: ADV7403BSTZ-110 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ADV7403BSTZ-110 (相同外形与封装尺寸) ——差异在于 ADC Resolution, Package, Digital Output Format, RoHS Status.
ADV7403KSTZ-140
✅ 直接替换联系询价
查看数据手册 →ADV7403KST-140
✅ 直接替换📋 参考替代料(不在目录中)
ADV7403BSTZ-110 规格参数
| Device Type | Multiformat video decoder and RGB graphics digitizer |
| ADC Resolution | 12 bit |
| Maximum Sampling Speed | 110 MHz |
| Video ADC Count | 4 |
| Analog Input Multiplexer Channels | 12 |
| Supported Analog Formats | PAL, NTSC, and SECAM |
| Supported Analog Inputs | Composite and S-Video |
| Digital Output Format | Serial ITU-R BT.656 |
| Graphics Input Function | RGB graphics digitizer |
| SCART Fast-Blank Support | Supported |
| 工作温度范围 | -40°C to +85°C |
| 封装 | 100-lead LQFP |
| Package Dimensions | 14 mm × 14 mm |
| RoHS 状态 | RoHS compliant |
| Lifecycle Recommendation | Not recommended for new designs |
| Product Family | ADV7403 |
| Speed-Grade Designator | -110 |
ADV7403BSTZ-110 14 mm × 14 mm 引脚配置指南
ADV7403BSTZ-110(14 mm × 14 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: ADV7403BSTZ-110.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ADV7403BSTZ-110 适用于 6 应用s: Industrial Visual Inspection, Professional Video Monitoring, Legacy Media Conversion, Video Capture Cards, Broadcast Test Equipment, Security and Surveillance Retrofit.
Industrial Visual Inspection
The ADV7403BSTZ-110 fits legacy machine-vision systems that receive composite or S-Video from analog cameras and need a standardized digital output. Its four 12-bit noise-shaped ADCs, 12-channel analog multiplexer, and multiformat PAL/NTSC/SECAM decoding allow an acquisition subsystem to replace separate analog conversion stages. The resulting ITU-R BT.656 stream can connect to an FPGA or embedded processor for inspection analysis. The 110 MHz grade should be matched against the intended pixel rate, while the -40°C to +85°C range supports controlled industrial environments. Because the family is not recommended for new designs, production equipment should plan controlled substitution or board revision.
推荐
Professional Video Monitoring
The ADV7403BSTZ-110 is appropriate for professional monitoring and broadcast-adjacent equipment that must ingest PAL, NTSC, or SECAM composite or S-Video. Its 12-bit digitization and integrated decoder produce ITU-R BT.656 pixel data for downstream scaling, recording, or display processing without a separate legacy-video decoder. The 12-channel analog multiplexer supports flexible source selection, while SCART fast-blank support can simplify compatible synchronization interfaces. Because the ADV7403 is not recommended for new designs, this device best serves established platforms with controlled production plans rather than newly launched broadcast products.
推荐
Legacy Media Conversion
The ADV7403BSTZ-110 can serve as the conversion front end in equipment that transfers legacy analog video into a digital workflow. Composite and S-Video sources are decoded as PAL, NTSC, or SECAM and emitted as ITU-R BT.656 data for capture, storage, enhancement, or transcoding. Its integrated four-ADC, 12-bit architecture reduces the component count compared with a discrete digitizer and decoder approach. The 110 MHz grade is appropriate when the target resolution and pixel timing remain below the limits of the selected operating mode. Existing converter designs can benefit from the standardized digital interface, but new products should first assess whether a currently recommended interface IC would reduce redesign risk.
推荐
Video Capture Cards
For an expansion or capture card that accepts legacy analog video, the ADV7403BSTZ-110 provides a clear source-to-pixel-data path. The decoder handles PAL, NTSC, and SECAM composite or S-Video, digitizes the selected channel with the integrated 12-bit ADCs, and presents a serial ITU-R BT.656 interface to the FPGA or capture controller. This allows clocking, formatting, and pixel data to be handled digitally downstream. The 100-lead LQFP requires careful analog routing and multilayer decoupling, and its 110 MHz grade should not be confused with the 140 MHz ADV7403KST-140 option when planning maximum pixel-clock support.
推荐
Broadcast Test Equipment
The ADV7403BSTZ-110 is suitable for test equipment that needs to analyze or convert standard-definition analog video signals. Its support for PAL, NTSC, and SECAM provides broad legacy-format coverage, while the 12-bit digitizers and digital BT.656 output allow measured pixel data to be captured, displayed, or checked by programmable logic. SCART fast-blank support can assist systems using compatible synchronization signaling. For production instruments, the industrial temperature range supports controlled test environments. The not-for-new-designs designation should be addressed through a product-life review and a planned path to a supported decoder if the platform will remain in production for many years.
推荐
Security and Surveillance Retrofit
The ADV7403BSTZ-110 can support retrofit equipment that receives composite or S-Video from an installed analog surveillance camera and must provide digital video to a modern processor. Its PAL, NTSC, and SECAM decoding removes the need for a separate legacy-video front end, while the 12-bit ITU-R BT.656 output connects to downstream image processing or recording electronics. The 110 MHz sampling grade and industrial temperature range fit many controlled installations. Board-level integration still requires careful handling of analog noise, grounding, clocking, and synchronization. Because the family is not recommended for new designs, long-lived surveillance projects should require a lifecycle and availability commitment before deployment.
推荐
推荐产品汇总
工程参考数据: ADV7403BSTZ-110 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ADV7403KSTZ-140 | ADV7403KST-140 |
|---|---|---|---|
| Package | 100-lead LQFP (14 mm × 14 mm) | 100-lead LQFP (14 mm × 14 mm) | 100-lead LQFP (14 mm × 14 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Maximum Sampling Speed | 110 MHz | 140 MHz | 140 MHz |
| Product Family | ADV7403 | ADV7403 | ADV7403 |
关键差异点
- Integrated 12-bit multiformat conversion in one device (对比 ADV7403KSTZ-140)
- Lower nominal sampling-speed grade (对比 ADV7403KSTZ-140)
- Broad legacy analog-format coverage (对比 ADV7401BSTZ-110)
设计说明
Treat the composite and S-Video inputs as sensitive high-impedance analog nodes. Route them away from the BT.656 outputs, clock signals, and switching-power nodes; keep return paths continuous under the inputs; and follow the recommended analog ground and reference arrangement in the manufacturer datasheet. Place input filtering and termination close to the source interface so that leakage and induced noise do not degrade the 12-bit conversion path.
Place every required bypass capacitor directly beside its associated supply and ground pins, with short, low-inductance connections and a solid ground plane. The ADV7403BSTZ-110 has separate digital, analog, and PLL-related supply domains, so do not assume that connecting the supply pins together on the schematic is sufficient. Follow the capacitor values, placement, and power-up sequence given in the datasheet and typical application circuit.
Route the serial ITU-R BT.656 clock and data as a controlled-impedance group on a multilayer board, and avoid stubs or test-point branches that are not part of the validated topology. Match trace lengths according to the source and destination clocking requirements, provide continuous reference planes, and account for connector and package parasitics when configuring the digital video link.
Do not treat the ADV7403KST-140 140 MHz grade as an unconditional drop-in replacement for the ADV7403BSTZ-110. Although both belong to the ADV7403 family and use the same 100-lead LQFP format, review ordering suffixes, clock limits, supply behavior, enable sequencing, exposed-pin treatment, and every unused or no-connect pin before approving a substitution.
合规信息
The manufacturer datasheet states that ADV7403BSTZ-110 is available in a RoHS-compliant 100-lead LQFP package. No separate REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statement was identified.