AFS600-1PQG208 - 600K-Gate 1.5V Fusion FPGA | Microsemi
Артикул: AFS600-1PQG208 ✓ АктивенAFS600-1PQG208 Обзор
A mixed-signal FPGA is a reconfigurable semiconductor that integrates digital programmable logic with analog and mixed-signal resources. Within the product hierarchy, the AFS600 belongs to the FPGA and CPLD class of programmable logic devices. Its flash-based configuration memory allows the device to retain its programmed configuration after power is removed, while its large logic capacity supports parallel processing, interface bridging, control, and embedded signal-processing functions.
The verified specifications identify 600,000 system gates, a 1.5 V supply, CMOS operation, and 1282.05 MHz performance for the AFS600 family. The Fusion family can include as many as 144 kbits of true dual-port SRAM, up to 300 user I/Os, comprehensive clock-generation and management circuitry, and configurable analog blocks. The seven-layer-metal process provides the programmable routing and logic resources required by complex mixed-signal designs.
The AFS600 family uses reprogrammable flash technology and supports single-chip implementation of configurable logic. Flash configuration distinguishes the family from SRAM-only FPGAs that require an external configuration device after each power cycle. According to the manufacturer family documentation, devices are tested to a 100°C junction temperature, supporting industrial designs that need verified operation beyond ordinary commercial temperature expectations.
Typical uses include communications infrastructure, industrial control, instrumentation, embedded signal processing, data acquisition, and systems requiring configurable analog and digital resources. The 600,000-gate capacity is useful when separate FPGA and analog-interface devices would otherwise complicate a board design. Engineers should confirm the required I/O count, speed grade, temperature grade, configuration method, and power-budget details for the exact orderable part before release to production.
Package information requires careful review because the supplied sources conflict: DigiKey and Kynix identify this order code as a 208-pin PQFP or 208-BFQFP, while one aggregation source describes an FBGA-256 package. The 208-pin designation is also embedded in the MPN suffix. Because no verified pin-level table or compatible 208-pin SVG key is available, the pinout is intentionally left unresolved rather than presenting an unsafe inferred mapping.
This page consolidates the verified gate count, voltage, process technology, speed, package indications, temperature information, and sourcing links for AFS600-1PQG208. It also identifies the limited verified drop-in evidence, records unresolved electrical and mechanical fields transparently, and provides engineering guidance for evaluating this mixed-signal FPGA in a new design.
Аналоги без доработки для AFS600-1PQG208 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
AFS600-1PQG208YI
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AFS600-1PQG208 Максимальные параметры и электрические характеристики
| Device Type | Fusion mixed-signal field-programmable gate array |
| System Gates | 600,000 gates |
| Maximum Operating Frequency | 1282.05 MHz |
| Напряжение питания | 1.5 V |
| Process Technology | 130 nm CMOS |
| Metal Layers | 7 layers |
| Configuration Technology | Reprogrammable flash |
| Logic Family | CMOS |
| Maximum True Dual-Port SRAM | 144 kbits |
| Maximum User I/Os | 300 I/Os |
| Рабочая температура | 0°C to 85°C |
| Junction Temperature Test Coverage | 100°C |
| Корпус | 208-pin PQFP |
| Alternative Package Report | 208-BFQFP |
| Package Pin Count | 208 pins |
| Package Pitch | 1 mm pitch |
| Analog Integration | Configurable analog resources |
| Clock Management | Comprehensive clock generation and management |
Руководство по цоколевке AFS600-1PQG208 в корпусе 1 mm pitch
Цоколевка для AFS600-1PQG208 (корпус 1 mm pitch). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для AFS600-1PQG208.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
AFS600-1PQG208 подходит для 6 применениеs: Industrial Control and Automation, Communications Infrastructure, Data Acquisition and Instrumentation, Embedded Signal Processing, Medical and Diagnostic Equipment, Secure Embedded Control.
Industrial Control and Automation
The AFS600-1PQG208 fits industrial controllers that combine sequence logic, communication interfaces, analog monitoring, and embedded data handling in one programmable device. Its 600,000 system gates provide broad logic capacity, while the family's up to 144 kbits of true dual-port SRAM support buffers or parallel processing tasks. The 1.5 V supply and 130 nm flash-based CMOS architecture make the device appropriate for systems that benefit from nonvolatile configuration and rapid restart after power loss. Before deployment, confirm the exact suffix's 0°C to 85°C rating, industrial qualification requirements, power budget, and 208-pin footprint against the installed controller hardware.
Рекомендуется
Communications Infrastructure
AFS600-1PQG208 is applicable to communications infrastructure designs that need parallel configurable logic, clock-management resources, and flash-retained operation. The family's configurable analog resources can support mixed-signal interfaces, while its 600,000 system gates and 1282.05 MHz listed performance provide resources for protocol handling, packet processing, and control logic. Flash configuration allows the system to restore its network personality after a power interruption without loading configuration from an external serial memory. Engineering validation should still cover actual I/O standards, line rates, clock jitter, transceiver requirements, and thermal margins because the supplied family-level figures do not define every board-level interface.
Рекомендуется
Data Acquisition and Instrumentation
The AFS600-1PQG208 can serve in data-acquisition and instrumentation systems where control, sampling sequencing, digital filtering, and analog interfacing coexist. Its configurable analog blocks offer a path to mixed-signal consolidation, while up to 144 kbits of true dual-port SRAM can support data staging and simultaneous access in a family configuration. The 600,000-gate logic capacity is useful for coordinating sensors, formatting results, and implementing local processing. The device should be selected only after verifying the precise analog input bandwidth, converter interface requirements, I/O timing, voltage rails, and package symbol in the exact manufacturer documentation.
Рекомендуется
Embedded Signal Processing
AFS600-1PQG208 is suitable for parallel embedded signal-processing tasks that benefit from configurable logic and true dual-port memory. The 600,000 system gates can host filters, correlation functions, state machines, and data-format conversion, while the family's listed maximum of 144 kbits of dual-port SRAM enables concurrent processing and buffering paths. A 1.5 V core operation also integrates naturally into modern low-voltage digital systems when the required I/O supplies and clocking are properly planned. The 1282.05 MHz figure is a family-level maximum and should not be treated as the sustained throughput of every logic block; timing closure and actual resource mapping remain mandatory.
Рекомендуется
Medical and Diagnostic Equipment
AFS600-1PQG208 may be considered for diagnostic and medical-equipment control subsystems that require deterministic programmable logic, configurable analog functions, and persistent configuration. The device family combines up to 144 kbits of true dual-port SRAM with 600,000 system gates, allowing acquisition sequencing, filtering, and supervisory control to be consolidated. The reported 0°C to 85°C operating range, 130 nm flash process, and 100°C junction-test statement provide useful initial screening information, but they do not establish medical certification. Each application requires a separate safety and quality assessment, including electrical isolation, fault analysis, software controls, and applicable regulatory evidence.
Рекомендуется
Secure Embedded Control
The AFS600-1PQG208 is applicable to embedded control systems that benefit from reprogrammable flash configuration and a substantial programmable-logic fabric. A stored flash configuration can simplify recovery after power loss, while the 600,000-gate capacity can implement control logic, diagnostics, communication checks, and hardware interlocks. The 1.5 V supply and configurable analog resources can simplify mixed-voltage board integration when appropriately conditioned. Security-critical use requires more than device selection: designers should implement authentication, secure update procedures, key protection, fault injection testing, and lifecycle monitoring as part of the complete system architecture.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AFS600-1PQG208 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AFS600-1PQG208YI |
|---|---|---|
| Package | 208-pin PQFP | 208-pin package indication |
| Brand | Microsemi | Microsemi |
| System Gates | 600,000 gates | 600,000 gates |
| Supply Voltage | 1.5 V | 1.5 V |
| Process Technology | 130 nm CMOS | 130 nm CMOS |
| Configuration Technology | Reprogrammable flash | Reprogrammable flash |
| Maximum True Dual-Port SRAM | 144 kbits | 144 kbits |
| Maximum User I/Os | 300 I/Os | 300 I/Os |
Ключевые отличия
- Integrated mixed-signal capability (против AFS600-1PQG208YI)
- Large programmable logic capacity (против AFS600-1PQG208YI)
- Nonvolatile flash configuration (против AFS600-1PQG208YI)
Заметки по проектированию
Resolve the package discrepancy before schematic capture or PCB layout. The MPN suffix, DigiKey, and Kynix results indicate a 208-pin PQFP or 208-BFQFP, while one aggregation listing incorrectly or ambiguously reports FBGA-256. Use the exact order-code table and mechanical drawing from the manufacturer datasheet to establish body size, lead pitch, pin numbering, and exposed-component requirements. Do not create a footprint or assign pin functions from the 256-pin snippet, and do not treat the JEDEC family name as sufficient evidence of footprint compatibility.
Budget the 1.5 V core supply and all board-level I/O rails separately. The verified excerpts provide the nominal supply voltage but not quiescent current, dynamic current, I/O supply values, or power coefficients. Obtain the exact-device electrical table and estimate worst-case consumption across utilized logic, memory, clocks, and I/O toggling. Specify regulator headroom, startup sequencing, and decoupling from the manufacturer recommendations. Any thermal calculation must be labeled as an estimate and tied to measured or datasheet-supported current values.
Keep the PCB layout tightly aligned with the verified package drawing and the manufacturer's pinout. Place configuration, clock, decoupling, and sensitive analog pins according to the datasheet guidance; do not infer analog or configuration assignments from the family description. For mixed-signal designs, partition digital routing and switching resources from sensitive analog paths, provide a clean return path, and control clock and power-supply return currents. Validate the final stack-up, lead geometry, assembly tolerances, and pin-1 orientation using the approved mechanical land pattern.
Do not treat 600,000 system gates as a guaranteed usable-logic count. The supplied excerpts do not identify the exact LUT, flip-flop, RAM, PLL, analog, differential-I/O, or user-I/O allocations for this suffix. Run synthesis with the vendor toolchain, inspect utilization and timing reports, and preserve the compiled programming file and tool version. Likewise, the listed 1282.05 MHz value should be treated as a family-level maximum, not a guaranteed clock rate for every design or I/O interface.
Информация о соответствии
The supplied excerpts do not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable because AFS600-1PQG208 is an FPGA rather than an automotive-qualified integrated circuit.
