AK5388AEQ - 24-Bit 4-Channel Audio ADC | AKM
Артикул: AK5388AEQ ✗ Снят с производстваAK5388AEQ Обзор
An audio ADC is a specialized analog-to-digital converter that converts four simultaneous analog input signals into high-resolution digital samples for processing, recording, or transmission. Within the broader semiconductor hierarchy, the AK5388AEQ is an ADC, then a data converter, then an interface IC and integrated circuit. Its four-channel architecture and I2S interface make it suited to multichannel professional audio, recording equipment, digital mixers, and high-fidelity playback systems.
Principal features include 24-bit resolution, sampling capability up to 216 kHz, four analog channels, and AKM Enhanced Dual Bit modulator architecture. The 120 dB dynamic range captures a wide range of signal amplitudes, while the 110 dB S/(N+D) rating quantifies noise and distortion performance. Optional mono mode raises dynamic range to 123 dB, a 3 dB improvement over the standard four-channel performance.
The AK5388A family uses an Enhanced Dual Bit architecture to balance conversion accuracy against implementation cost. I2S output provides a conventional digital connection to audio processors, DACs, and digital transports. The converter uses separate low-voltage and high-voltage supply ranges of 3 V to 3.6 V and 4.75 V to 5.25 V, respectively, allowing compatible signal-chain partitioning where appropriate.
Typical uses include professional audio mixers, multichannel recording interfaces, digital consoles, studio monitors, broadcast equipment, and high-end home audio systems. Four-channel conversion reduces the number of converters required for surround or multichannel monitoring, while the 216 kHz sampling capability supports high-resolution audio workflows.
PCB implementation requires careful treatment of analog and digital supply rails, short analog input routes, and a stable low-noise reference. Decoupling capacitors should be positioned close to their associated supply pins, and analog and digital return currents should be managed so switching and digital-interface activity does not couple into the input channels. The complete pin assignment and recommended application circuit should be taken from the manufacturer datasheet.
This page consolidates the confirmed AK5388AEQ specifications, package details, application guidance, pricing workflow, and substitution constraints to support faster engineering evaluation. It also distinguishes directly documented characteristics from parameters that require confirmation in the datasheet or with the manufacturer.
Аналоги без доработки для AK5388AEQ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AK5388AEQ (тот же форм-фактор и посадочное место) — отличается по Dynamic Range, Maximum Sampling Rate.
Для этого товара нет аналогов без доработки.
Запросить аналогиAK5388AEQ Максимальные параметры и электрические характеристики
| Converter Type | 24-bit audio ADC |
| Channel Count | 4 channels |
| Maximum Sampling Rate | 216 kHz |
| Digital Audio Interface | I2S |
| Dynamic Range | 120 dB |
| Signal-to-Noise Plus Distortion | 110 dB |
| Mono Mode Dynamic Range | 123 dB |
| Modulator Architecture | Enhanced Dual Bit |
| Low-Voltage Supply Range | 3 V to 3.6 V |
| High-Voltage Supply Range | 4.75 V to 5.25 V |
| Корпус | 44-LQFP, 10 mm x 10 mm |
| Число выводов | 44 pins |
| Тип монтажа | Surface mount |
| Application Category | High-end digital audio systems |
| Digital Output Format | I2S |
Руководство по цоколевке AK5388AEQ в корпусе 44-lqfp, 10 mm x 10 mm
Цоколевка для AK5388AEQ (корпус 44-lqfp, 10 mm x 10 mm). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для AK5388AEQ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
AK5388AEQ подходит для 6 применениеs: Professional Multichannel Recording Interface, Digital Mixing Console, Studio Monitor and Metering System, High-End Home Audio System, Broadcast and Live-Sound Processing, Digital Audio Development Platform.
Professional Multichannel Recording Interface
The AK5388AEQ fits a professional recording interface that requires four simultaneous analog inputs and high-resolution conversion. Its 24-bit resolution and operation up to 216 kHz preserve wide dynamic-range material, while the documented 120 dB dynamic range and 110 dB S/(N+D) support professional capture performance. Four channels can feed an audio processor over I2S without requiring four separate converter packages. The implementation should follow the manufacturer application circuit for analog input filtering, supply decoupling, reference stability, and clock routing. Verify that the downstream processor accepts the converter's I2S format and clocking arrangement, and evaluate the legacy part's lifecycle position before beginning a long production program.
Рекомендуется
Digital Mixing Console
The AK5388AEQ can serve as the front-end converter for a digital mixing console with four-channel input strips. Its four-channel architecture maps naturally to grouped microphone, line, or instrument inputs, while 24-bit conversion and sampling up to 216 kHz support high-resolution mixing and monitoring workflows. The I2S interface provides a direct digital path to a DSP or digital audio processor. Design the analog front end for low distortion and the clock network for low jitter, because converter performance alone does not determine the final console noise floor. Confirm master/slave clock mode, data alignment, channel ordering, and supported sampling rates against the selected digital processor before releasing the PCB layout.
Рекомендуется
Studio Monitor and Metering System
The AK5388AEQ is appropriate for a studio monitoring or metering system that requires accurate conversion of multiple analog channels. Its 120 dB dynamic range and 110 dB S/(N+D) are relevant when preserving low-level details during capture and level analysis, and the optional 123 dB mono mode can improve dynamic range for single-channel monitoring paths. The converter's I2S output can deliver samples to a digital signal processor, meter controller, or display pipeline. In a practical design, maintain a short and symmetric analog input path, use stable reference and clock connections, and keep digital switching activity away from sensitive analog returns. Validate channel mapping and latency with the monitoring processor before deploying the board.
Рекомендуется
High-End Home Audio System
The AK5388AEQ can be used in a high-end home audio system that accepts balanced or single-ended analog sources and requires a multichannel digital conversion stage. Four inputs at 24-bit resolution and up to 216 kHz are appropriate for premium playback, recording, and switching applications. The 120 dB dynamic range helps retain detail across quiet passages and high-level transients, while I2S provides a conventional link to an audio DAC or digital processor. Because the part uses separate 3 V to 3.6 V and 4.75 V to 5.25 V supply ranges, careful rail partitioning is required. The obsolete lifecycle indication should be checked against the expected service life of the product before the design is committed.
Рекомендуется
Broadcast and Live-Sound Processing
The AK5388AEQ can support multichannel broadcast or live-sound processing when four analog sources must be captured at high resolution. The four-channel converter reduces board area compared with four single-channel devices, and operation up to 216 kHz provides headroom for high-resolution production workflows. The 120 dB dynamic range and 110 dB S/(N+D) are useful for preserving program material before downstream level processing. A robust design must provide low-jitter clocking, isolated or carefully partitioned analog returns, and correctly sequenced supplies. Validate the I2S framing, clock relationship, and latency through the signal processor. For new long-lived products, also evaluate an actively supported converter because lifecycle continuity may outweigh the benefit of retaining this architecture.
Рекомендуется
Digital Audio Development Platform
The AK5388AEQ is useful in a digital audio development platform for evaluating four-channel conversion, I2S clocking, and high-resolution sampling. Its 24-bit format and 216 kHz maximum rate make it possible to test professional-class signal paths, while mono mode provides a way to examine dynamic-range behavior with fewer active channels. The device can feed an audio processor, logic analyzer, or digital test setup while engineers characterize analog noise, clock jitter sensitivity, and digital timing. Its 44-LQFP footprint also provides a defined land pattern for controlled prototype work. Because no confirmed drop-in replacement has been identified, preserve the footprint when testing alternatives and document any changes to pin functions, supply sequencing, or digital timing rather than assuming interchangeability.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AK5388AEQ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Package | 44-LQFP (10 mm x 10 mm) |
| Brand | Asahi Kasei Microdevices |
| Converter Type | 24-bit audio ADC |
| Channel Count | 4 channels |
| Maximum Sampling Rate | 216 kHz |
| Digital Audio Interface | I2S |
| Dynamic Range | 120 dB |
| Signal-to-Noise Plus Distortion | 110 dB |
| Mono Mode Dynamic Range | 123 dB |
| Low-Voltage Supply Range | 3 V to 3.6 V |
| High-Voltage Supply Range | 4.75 V to 5.25 V |
| Modulator Architecture | Enhanced Dual Bit |
Ключевые отличия
- Four-channel high-resolution conversion in one package (против Typical single-channel audio ADC)
- Extended dynamic range in optional mono operation (против Standard four-channel operating mode)
- Professional-rate I2S conversion (против Lower-rate audio ADC)
- Compact 44-LQFP integration (против Multi-package four-channel converter arrangement)
Заметки по проектированию
Follow the manufacturer application layout for analog input, digital interface, supply, and ground connections. Keep the four analog input paths short and symmetric, place input filtering components close to their associated pins, and route high-current digital returns away from sensitive analog nodes. The 44-LQFP package is only 10 mm by 10 mm, so adequate escape routing and component placement are important for preserving full-scale accuracy.
The converter requires a 3 V to 3.6 V rail and a 4.75 V to 5.25 V rail. Use separate local decoupling branches for each supply domain and place the specified capacitors close to the relevant pins. Keep analog and digital supply paths separate until their planned grounding point. Confirm startup, shutdown, and power-sequencing requirements in the manufacturer datasheet rather than assuming that the two rails may be brought up in any order.
I2S data, clock, and latch signals are high-speed digital connections even though their logic levels are low voltage. Use short traces, a continuous reference plane, and clean return paths; avoid routing them across split planes or through noisy switching-regulator areas. Match clock timing and data alignment to the connected processor, and measure the system clock for jitter before attributing audio performance solely to the ADC.
Do not substitute the AK5388A family name for the exact AK5388AEQ orderable code without checking the ordering table, package, temperature range, and grade. Similarly, do not treat a converter with similar resolution or sampling speed as a drop-in replacement unless all 44 pins, supply rails, clock requirements, and I2S framing have been checked. Confirm obsolete-part authenticity, condition, and storage history when procuring remaining inventory.
Информация о соответствии
The available product documents identify the converter and package but do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this is a professional audio converter rather than an automotive-qualified device.