AKM (Asahi Kasei Microdevices)

AK5388AEQ - 24-Bit 4-Channel Audio ADC | AKM

MPN: AK5388AEQ ✗ پایان تولید
3 V to 3.6 V Vdss 44-LQFP, 10 mm x 10 mm Package
حداقل سفارش: 1 |

AK5388AEQ نمای کلی

The Asahi Kasei Microdevices AK5388AEQ is a 24-bit, 4-channel audio ADC optimized for high-end digital audio systems, with operation up to 216 kHz and digital audio output through I2S. It provides 120 dB dynamic range, 110 dB signal-to-noise-plus-distortion performance, and an optional mono operating mode that extends dynamic range to 123 dB. The device is packaged in a 44-LQFP measuring 10 mm by 10 mm.

An audio ADC is a specialized analog-to-digital converter that converts four simultaneous analog input signals into high-resolution digital samples for processing, recording, or transmission. Within the broader semiconductor hierarchy, the AK5388AEQ is an ADC, then a data converter, then an interface IC and integrated circuit. Its four-channel architecture and I2S interface make it suited to multichannel professional audio, recording equipment, digital mixers, and high-fidelity playback systems.

Principal features include 24-bit resolution, sampling capability up to 216 kHz, four analog channels, and AKM Enhanced Dual Bit modulator architecture. The 120 dB dynamic range captures a wide range of signal amplitudes, while the 110 dB S/(N+D) rating quantifies noise and distortion performance. Optional mono mode raises dynamic range to 123 dB, a 3 dB improvement over the standard four-channel performance.

The AK5388A family uses an Enhanced Dual Bit architecture to balance conversion accuracy against implementation cost. I2S output provides a conventional digital connection to audio processors, DACs, and digital transports. The converter uses separate low-voltage and high-voltage supply ranges of 3 V to 3.6 V and 4.75 V to 5.25 V, respectively, allowing compatible signal-chain partitioning where appropriate.

Typical uses include professional audio mixers, multichannel recording interfaces, digital consoles, studio monitors, broadcast equipment, and high-end home audio systems. Four-channel conversion reduces the number of converters required for surround or multichannel monitoring, while the 216 kHz sampling capability supports high-resolution audio workflows.

PCB implementation requires careful treatment of analog and digital supply rails, short analog input routes, and a stable low-noise reference. Decoupling capacitors should be positioned close to their associated supply pins, and analog and digital return currents should be managed so switching and digital-interface activity does not couple into the input channels. The complete pin assignment and recommended application circuit should be taken from the manufacturer datasheet.

This page consolidates the confirmed AK5388AEQ specifications, package details, application guidance, pricing workflow, and substitution constraints to support faster engineering evaluation. It also distinguishes directly documented characteristics from parameters that require confirmation in the datasheet or with the manufacturer.

جایگزین‌های drop-in برای AK5388AEQ — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای AK5388AEQ (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Dynamic Range, Maximum Sampling Rate.

AKM (Asahi Kasei Microdevices)
Dynamic Range: 120dB
Maximum Sampling Rate: 216kHz
مقایسه با AK5388AEQ →

هیچ جایگزین مستقیمی برای این محصول موجود نیست.

درخواست جایگزین

AK5388AEQ حداکثر مقادیر مجاز و مشخصات الکتریکی

Converter Type 24-bit audio ADC
Channel Count 4 channels
Maximum Sampling Rate 216 kHz
Digital Audio Interface I2S
Dynamic Range 120 dB
Signal-to-Noise Plus Distortion 110 dB
Mono Mode Dynamic Range 123 dB
Modulator Architecture Enhanced Dual Bit
Low-Voltage Supply Range 3 V to 3.6 V
High-Voltage Supply Range 4.75 V to 5.25 V
بسته‌بندی 44-LQFP, 10 mm x 10 mm
تعداد پایه 44 pins
نوع نصب Surface mount
Application Category High-end digital audio systems
Digital Output Format I2S

راهنمای پیکربندی پین AK5388AEQ 44-lqfp, 10 mm x 10 mm

پیکربندی پین برای AK5388AEQ (پکیج 44-lqfp, 10 mm x 10 mm). این قطعه آنالوگ دارای پین‌های ورودی، خروجی و تغذیه است. برای پیکربندی‌های پین offset null، جبران‌سازی و فعال‌سازی به دیتاشیت سازنده مراجعه کنید. ایده‌آل برای مدارهای شرطی‌سازی سیگنال و تقویت‌کننده.

نمودار پین‌آوت پکیج 44-lqfp, 10 mm x 10 mm برای AK5388AEQ

داده پین‌آوت تفصیلی موجود نیست برای AK5388AEQ.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

AK5388AEQ مناسب است برای 6 کاربردs: Professional Multichannel Recording Interface, Digital Mixing Console, Studio Monitor and Metering System, High-End Home Audio System, Broadcast and Live-Sound Processing, Digital Audio Development Platform.

🎧

Professional Multichannel Recording Interface

The AK5388AEQ fits a professional recording interface that requires four simultaneous analog inputs and high-resolution conversion. Its 24-bit resolution and operation up to 216 kHz preserve wide dynamic-range material, while the documented 120 dB dynamic range and 110 dB S/(N+D) support professional capture performance. Four channels can feed an audio processor over I2S without requiring four separate converter packages. The implementation should follow the manufacturer application circuit for analog input filtering, supply decoupling, reference stability, and clock routing. Verify that the downstream processor accepts the converter's I2S format and clocking arrangement, and evaluate the legacy part's lifecycle position before beginning a long production program.

🏭

Digital Mixing Console

The AK5388AEQ can serve as the front-end converter for a digital mixing console with four-channel input strips. Its four-channel architecture maps naturally to grouped microphone, line, or instrument inputs, while 24-bit conversion and sampling up to 216 kHz support high-resolution mixing and monitoring workflows. The I2S interface provides a direct digital path to a DSP or digital audio processor. Design the analog front end for low distortion and the clock network for low jitter, because converter performance alone does not determine the final console noise floor. Confirm master/slave clock mode, data alignment, channel ordering, and supported sampling rates against the selected digital processor before releasing the PCB layout.

📺

Studio Monitor and Metering System

The AK5388AEQ is appropriate for a studio monitoring or metering system that requires accurate conversion of multiple analog channels. Its 120 dB dynamic range and 110 dB S/(N+D) are relevant when preserving low-level details during capture and level analysis, and the optional 123 dB mono mode can improve dynamic range for single-channel monitoring paths. The converter's I2S output can deliver samples to a digital signal processor, meter controller, or display pipeline. In a practical design, maintain a short and symmetric analog input path, use stable reference and clock connections, and keep digital switching activity away from sensitive analog returns. Validate channel mapping and latency with the monitoring processor before deploying the board.

🎵

High-End Home Audio System

The AK5388AEQ can be used in a high-end home audio system that accepts balanced or single-ended analog sources and requires a multichannel digital conversion stage. Four inputs at 24-bit resolution and up to 216 kHz are appropriate for premium playback, recording, and switching applications. The 120 dB dynamic range helps retain detail across quiet passages and high-level transients, while I2S provides a conventional link to an audio DAC or digital processor. Because the part uses separate 3 V to 3.6 V and 4.75 V to 5.25 V supply ranges, careful rail partitioning is required. The obsolete lifecycle indication should be checked against the expected service life of the product before the design is committed.

🌐

Broadcast and Live-Sound Processing

The AK5388AEQ can support multichannel broadcast or live-sound processing when four analog sources must be captured at high resolution. The four-channel converter reduces board area compared with four single-channel devices, and operation up to 216 kHz provides headroom for high-resolution production workflows. The 120 dB dynamic range and 110 dB S/(N+D) are useful for preserving program material before downstream level processing. A robust design must provide low-jitter clocking, isolated or carefully partitioned analog returns, and correctly sequenced supplies. Validate the I2S framing, clock relationship, and latency through the signal processor. For new long-lived products, also evaluate an actively supported converter because lifecycle continuity may outweigh the benefit of retaining this architecture.

🔧

Digital Audio Development Platform

The AK5388AEQ is useful in a digital audio development platform for evaluating four-channel conversion, I2S clocking, and high-resolution sampling. Its 24-bit format and 216 kHz maximum rate make it possible to test professional-class signal paths, while mono mode provides a way to examine dynamic-range behavior with fewer active channels. The device can feed an audio processor, logic analyzer, or digital test setup while engineers characterize analog noise, clock jitter sensitivity, and digital timing. Its 44-LQFP footprint also provides a defined land pattern for controlled prototype work. Because no confirmed drop-in replacement has been identified, preserve the footprint when testing alternatives and document any changes to pin functions, supply sequencing, or digital timing rather than assuming interchangeability.

What is the AK5388AEQ?
The AK5388AEQ is a 24-bit, 4-channel audio ADC for high-end digital audio equipment. According to the AKM Semiconductor datasheet, it supports sampling rates up to 216 kHz, uses I2S digital output, and delivers 120 dB dynamic range with 110 dB S/(N+D). The converter is housed in a 44-LQFP package measuring 10 mm by 10 mm.
What are the key specifications of AK5388AEQ?
The AK5388AEQ combines 24-bit resolution, 4-channel conversion, and operation up to 216 kHz. The manufacturer datasheet identifies 120 dB dynamic range, 110 dB signal-to-noise-plus-distortion, and optional mono mode with 123 dB dynamic range. Its I2S interface and dual supply ranges of 3 V to 3.6 V and 4.75 V to 5.25 V suit high-resolution multichannel audio systems.
Where can I download the AK5388AEQ datasheet PDF?
The AK5388AEQ datasheet PDF is available from AKM Semiconductor through the linked manufacturer document and from the DigiKey-hosted copy in the product sources. The document covers the AK5388A family, including its 24-bit four-channel architecture, Enhanced Dual Bit modulator, electrical characteristics, pin descriptions, and application information. Use the PDF for the authoritative AK5388AEQ pin and electrical limits.
Where can I find the AK5388AEQ pinout?
The AK5388AEQ pinout is documented in the pin-description section of the AK5388A manufacturer datasheet. The device uses a 44-LQFP package with 44 numbered pins, but the exact signal assignment for every pin is not reproduced on this page. Use the package drawing and pin-description table in the manufacturer PDF when assigning PCB nets, and consult the pin table for analog inputs, supplies, clocks, and I2S signals.
Is the AK5388AEQ suitable for high-resolution audio?
The AK5388AEQ is suitable for high-resolution multichannel audio because it provides 24-bit conversion, supports sampling up to 216 kHz, and offers 120 dB dynamic range. The 110 dB S/(N+D) specification supports use in recording and playback paths requiring low conversion noise. System performance still depends on analog-front-end design, clocking, grounding, supply integrity, and the downstream audio processor.
What is the difference between AK5388AEQ and AK5388A?
AK5388AEQ is the orderable package suffix used for the AK5388A 44-LQFP device, while AK5388A is the family designation used in the manufacturer datasheet. The documented converter performance includes 24-bit resolution, 216 kHz sampling, four channels, 120 dB dynamic range, and 110 dB S/(N+D). Check the ordering-information section before treating another suffix as an exact replacement because package, temperature, and grade options can differ.
What can replace AK5388AEQ?
A replacement for the AK5388AEQ must preserve the 44-LQFP footprint, pin assignment, 24-bit resolution, four-channel capability, I2S interface, and approximately 216 kHz sampling rate. No confirmed pin-compatible substitute is identified for this exact MPN. Treat functionally similar audio ADCs as redesign candidates until their pinouts, clock requirements, supply rails, digital formats, and acquisition performance have been verified against the AK5388AEQ datasheet.
Is there an AKM drop-in replacement for AK5388AEQ?
No same-brand drop-in replacement is confirmed for the AK5388AEQ. The cross-reference results do not identify another AKM orderable MPN with the same 44-LQFP pinout and matching electrical and digital interfaces. Confirm any proposed alternative with the manufacturer, and avoid substituting an AK5388-family device solely because it has a similar converter description or sampling rate.
What is the best Cross Reference equivalent for AK5388AEQ?
There is no verified cross-brand drop-in equivalent for the AK5388AEQ in the available cross-reference results. A qualifying replacement would need the same 44-LQFP footprint and pin-to-pin compatibility while maintaining 24-bit resolution, four channels, I2S output, and up to 216 kHz sampling. Because these requirements are unusually restrictive, request lifecycle and second-source information directly from Asahi Kasei Microdevices for a guaranteed production solution.
When should I choose AK5388AEQ over another audio ADC?
Choose the AK5388AEQ when an existing high-end audio design specifically requires its 44-LQFP interface, 24-bit four-channel conversion, I2S output, and sampling capability up to 216 kHz. Its 120 dB dynamic range and optional 123 dB mono mode are useful in professional recording and monitoring equipment. For a new design, compare newer converters on power, clocking, digital formats, latency, and availability rather than assuming this legacy device is the lowest-power choice.
Is the AK5388AEQ suitable for a digital mixer or multichannel recorder?
The AK5388AEQ is suitable for a digital mixer or multichannel recorder that uses four simultaneous analog channels and an I2S interface. Its 24-bit resolution and operation up to 216 kHz align with high-resolution professional audio workflows, while the four-channel architecture reduces the number of converters needed for surround or multichannel monitoring. Confirm clock, master-mode, and digital-interface compatibility with the selected audio processor.
What power supplies does the AK5388AEQ require?
The AK5388AEQ uses two documented supply ranges: 3 V to 3.6 V and 4.75 V to 5.25 V. These rails serve different internal sections of the converter, so a successful implementation requires correct sequencing, decoupling, and grounding between analog and digital domains. Follow the manufacturer application diagram for capacitor values and startup relationships rather than combining the two supply ranges into one operating condition.
Where can I buy AK5388AEQ online?
Use the Request a Quote form on this page to request AK5388AEQ availability, current pricing, minimum order quantity, and lead time. Because this part is marked obsolete in one market listing and no current manufacturer inventory statement is confirmed, a written quote should establish exact suffix availability and delivery conditions. Provide the target quantity, packaging preference, and required ship date with the request.
What is the price of AK5388AEQ?
The current commercial price for AK5388AEQ should be obtained through the Request a Quote form on this page. The part is an obsolete-market audio ADC, so its price and availability may vary with quantity, condition, and remaining inventory. The form allows the request to be tied to the exact AK5388AEQ MPN and a specific order quantity rather than relying on a potentially stale historical listing.
What is the lead time and stock status of AK5388AEQ?
Current stock and lead time for AK5388AEQ should be confirmed through the Request a Quote form on this page. The part has an obsolete lifecycle indication, which means normal active-production scheduling cannot be assumed. Request the exact MPN, acceptable package condition, annual usage, and required delivery date so the supplier can confirm whether any remaining inventory can support the project.

داده‌های مرجع مهندسی برای AK5388AEQ — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the AK5388AEQ when maintaining an existing design that uses its exact 44-LQFP footprint, four-channel 24-bit conversion, I2S interface, 216 kHz sampling capability, and dual supply ranges. It is particularly suitable for legacy professional recording, mixing, monitoring, and broadcast equipment where changing the converter architecture would require substantial PCB and firmware work. For a new design, weigh the obsolete lifecycle position against currently supported audio ADCs with integrated clocking, lower power, smaller packages, or additional digital formats. Do not select a different part merely because it offers 24-bit resolution or four channels; verify pin assignment, clock mode, I2S alignment, reference voltage, supply sequencing, acquisition latency, and package geometry. Request the manufacturer’s lifecycle guidance before committing to a production program.

مقایسه با جایگزین‌ها

پارامتر این محصول
Package 44-LQFP (10 mm x 10 mm)
Brand Asahi Kasei Microdevices
Converter Type 24-bit audio ADC
Channel Count 4 channels
Maximum Sampling Rate 216 kHz
Digital Audio Interface I2S
Dynamic Range 120 dB
Signal-to-Noise Plus Distortion 110 dB
Mono Mode Dynamic Range 123 dB
Low-Voltage Supply Range 3 V to 3.6 V
High-Voltage Supply Range 4.75 V to 5.25 V
Modulator Architecture Enhanced Dual Bit

تفاوت‌های کلیدی

  • Four-channel high-resolution conversion in one package (در مقابلTypical single-channel audio ADC)
  • Extended dynamic range in optional mono operation (در مقابلStandard four-channel operating mode)
  • Professional-rate I2S conversion (در مقابلLower-rate audio ADC)
  • Compact 44-LQFP integration (در مقابلMulti-package four-channel converter arrangement)

یادداشت‌های طراحی

Follow the manufacturer application layout for analog input, digital interface, supply, and ground connections. Keep the four analog input paths short and symmetric, place input filtering components close to their associated pins, and route high-current digital returns away from sensitive analog nodes. The 44-LQFP package is only 10 mm by 10 mm, so adequate escape routing and component placement are important for preserving full-scale accuracy.

The converter requires a 3 V to 3.6 V rail and a 4.75 V to 5.25 V rail. Use separate local decoupling branches for each supply domain and place the specified capacitors close to the relevant pins. Keep analog and digital supply paths separate until their planned grounding point. Confirm startup, shutdown, and power-sequencing requirements in the manufacturer datasheet rather than assuming that the two rails may be brought up in any order.

I2S data, clock, and latch signals are high-speed digital connections even though their logic levels are low voltage. Use short traces, a continuous reference plane, and clean return paths; avoid routing them across split planes or through noisy switching-regulator areas. Match clock timing and data alignment to the connected processor, and measure the system clock for jitter before attributing audio performance solely to the ADC.

Do not substitute the AK5388A family name for the exact AK5388AEQ orderable code without checking the ordering table, package, temperature range, and grade. Similarly, do not treat a converter with similar resolution or sampling speed as a drop-in replacement unless all 44 pins, supply rails, clock requirements, and I2S framing have been checked. Confirm obsolete-part authenticity, condition, and storage history when procuring remaining inventory.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The available product documents identify the converter and package but do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this is a professional audio converter rather than an automotive-qualified device.

تاریخ تأیید داده‌ها: 2026-11-16 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

AK5388AEQ datasheet AK5388AEQ datasheet pdf AK5388AEQ pinout AK5388AEQ specifications AK5388AEQ equivalent AK5388AEQ replacement AK5388AEQ cross reference AK5388AEQ footprint AK5388AEQ price AK5388AEQ stock AK5388 24 bit 4 channel ADC AK5388 216 kHz I2S ADC AK5388AEQ professional audio converter Asahi Kasei AK5388AEQ

قطعات و اصطلاحات مرتبط

Asahi Kasei Microdevices AKM Semiconductor AK5388AEQ AK5388A 24-bit ADC audio analog-to-digital converter data converter interface IC integrated circuit semiconductor I2S Enhanced Dual Bit architecture dynamic range signal-to-noise plus distortion four-channel ADC mono mode 44-LQFP LQFP package family surface-mount package professional audio digital mixer recording interface studio monitor broadcast equipment
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ