APA600-FG484 - 600K Gate 180MHz ProASICPLUS FPGA | Microchip
Артикул: APA600-FG484 ✓ АктивенAPA600-FG484 Обзор
A ProASICPLUS FPGA is a programmable-logic semiconductor that combines configurable logic blocks, programmable interconnect resources, and embedded memory in one device. Within the product hierarchy, an FPGA is a semiconductor and a programmable-logic IC, while the APA600 belongs to the ProASICPLUS family of Flash-based, nonvolatile FPGAs. The 600K system-gate resource provides substantially more design capacity than small programmable logic devices, supporting parallel data paths, control logic, protocol handling, and moderate signal-processing functions.
The APA600-FG484 includes 370 I/O, which provides a substantial interface complement for connecting external memories, control signals, communications peripherals, and mixed-signal system components. Its 180 MHz device speed is useful for designs operating below the maximum theoretical operating frequency when conservative timing margins are required. The 484-FBGA package also supports dense board layouts, although its fine ball pitch requires careful PCB design, inspection, and assembly planning.
Typical applications include industrial automation, embedded control, communications infrastructure, test equipment, and high-density digital interfaces. The Flash-based configuration architecture is valuable in products that must retain a programmable configuration through power cycles, field updates, or production reprogramming. The device should be selected only after checking the complete electrical, timing, pin, and package constraints for the specific design.
A critical design consideration is that the 484-ball FBGA package is not a simple two-dimensional leaded footprint. The PCB must use the manufacturer-recommended land pattern, power and ground distribution, via arrangement, and assembly profile. Confirm the exact pinout and differential-I/O requirements in the manufacturer datasheet before routing the board. Use the Request a Quote form on this page for current availability, lead time, and commercial terms.
Аналоги без доработки для APA600-FG484 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
APA600-FGG484
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
APA600-FGG484I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
APA600-FG484I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
APA600-FG484A
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
APA600-FG484
✅ Прямая заменаУточнить цену
Открыть даташит →APA600-FG484 Максимальные параметры и электрические характеристики
| Product Type | Flash-based ProASICPLUS field-programmable gate array |
| System Gates | 600,000 gates |
| I/O Count | 370 I/O |
| Maximum Operating Frequency | 180 MHz |
| Logic Cell Count | 21,504 cells |
| Technology | 0.22 um CMOS |
| Core Voltage | 2.5 V |
| Configuration Technology | Flash, nonvolatile |
| Корпус | 484-FBGA, 23 x 23 mm |
| Ball Pitch | 1.0 mm |
| Тип монтажа | Surface mount |
| Lead-Free Status | Lead-free status not stated for APA600-FG484 |
| Статус RoHS | Non-compliant |
| Статус жизненного цикла | Active |
| Minimum Order Quantity | 60 pieces |
| Lead Time | 16 weeks |
| Programming | Nonvolatile Flash configuration |
Руководство по цоколевке APA600-FG484 в корпусе 484-fbga, 23 x 23 mm
Цоколевка для APA600-FG484 (корпус 484-fbga, 23 x 23 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для APA600-FG484.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
APA600-FG484 подходит для 6 применениеs: Industrial Automation Control, Communications Protocol Bridge, Embedded Data Acquisition, Test and Measurement Equipment, Network Interface Acceleration, Video and Image Processing.
Industrial Automation Control
The APA600-FG484 fits industrial automation controllers that combine parallel sensor conditioning logic, machine-state sequencing, communications, and safety-related interlocks in one programmable device. Its 600,000 system gates and 21,504 logic cells provide room for substantial control logic without relying on several small CPLDs, while 370 I/O support encoders, relay drivers, and field-bus interfaces. Flash-based configuration is useful where the control firmware must remain available after power loss. The 484-FBGA package also reduces board footprint, but it requires qualified assembly processes, fine-pitch inspection, and careful power-delivery design.
Рекомендуется
Communications Protocol Bridge
APA600-FG484 can implement protocol conversion, framing, buffering, and interface multiplexing between legacy serial peripherals and newer digital subsystems. Its 370 available I/O and 600K system gates allow multiple parallel datapaths to coexist with state-machine control logic, while the 180 MHz device speed provides useful timing headroom for synchronous interfaces. Flash configuration supports field reprogramming of bridge protocols without volatile SRAM initialization. Engineers should verify the exact I/O standards, clocking resources, and pin assignments for every external transceiver, particularly where source-synchronous signals or differential pairs are involved.
Рекомендуется
Embedded Data Acquisition
The APA600-FG484 is suited to embedded data-acquisition systems that must coordinate multiple converters, counters, buffers, and digital interfaces. A 370-I/O complement can connect parallel ADC data buses, clock and control signals, status lines, and external memory interfaces, while 600,000 system gates support acquisition sequencing and test logic. The nonvolatile Flash configuration simplifies field upgrades and preserves setup data across power cycles. Timing closure remains important: the 180 MHz headline frequency is a device-level maximum, and each implemented path must meet timing requirements at its actual clock rate.
Рекомендуется
Test and Measurement Equipment
APA600-FG484 can serve in programmable test and measurement equipment where sequencing, pattern generation, instrument-bus control, and acquisition functions must share a single FPGA. Its high logic capacity allows parallel control paths to replace chains of discrete programmable logic devices, and 370 I/O provide extensive connectivity to converters, relays, front-end circuits, and communication transceivers. Flash-based configuration is beneficial in instruments that must retain complex test sequences after power cycling. Designers should reserve resources for clock distribution, debug access, and boundary-scan requirements while maintaining the manufacturer’s recommended 484-FBGA layout.
Рекомендуется
Network Interface Acceleration
APA600-FG484 is appropriate for line-rate packet processing, protocol framing, checksum generation, buffering, and traffic-control functions in embedded network equipment. The 600,000-gate architecture provides substantial parallel datapath capacity, and the 370 I/O can support packet interfaces, status controls, clocks, and management signals. Its 180 MHz maximum operating frequency can serve moderate-speed Ethernet, industrial network, or proprietary interface architectures when timing margins are respected. Configuration memory is nonvolatile, which supports reliable boot behavior and simplifies field maintenance, while board-level signal integrity and synchronous-interface timing require careful implementation.
Рекомендуется
Video and Image Processing
APA600-FG484 can support parallel pixel pipelines, timing generators, lookup tables, control state machines, and interface adapters in compact image-processing modules. Its 600,000 system gates provide substantially more parallel processing capability than a conventional CPLD, and 370 I/O allow direct connection to CMOS sensors, display interfaces, memories, and pipeline-control signals. The 180 MHz operating ceiling supports many moderate-speed pixel-clock architectures, though actual video timing depends on the selected I/O, clocking scheme, and logic mapping. Use the exact device pinout and package drawing to plan high-speed routing and connector escape paths.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для APA600-FG484 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | APA600-FGG484 | APA600-FGG484I | APA600-FG484I | APA600-FG484A | APA600-FG484 |
|---|---|---|---|---|---|---|
| Package | 484-FBGA, 23 x 23 mm | 484-FBGA, 1.0 mm pitch | 484-FBGA, 1.0 mm pitch | 484-FBGA, 1.0 mm pitch | 484-FBGA | 484-FBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates |
| Maximum Operating Frequency | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz |
| Core Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Configuration Technology | Nonvolatile Flash | Flash-based ProASICPLUS | Flash-based ProASICPLUS | Flash-based ProASICPLUS | Flash-based ProASICPLUS | Flash-based ProASICPLUS |
Ключевые отличия
- Nonvolatile Flash configuration supports field-retained programmable logic (против APA600-FGG484I)
- RoHS-compliant family options are available for controlled sourcing (против APA600-FGG484)
- Industrial-temperature ordering options support environmental requirements (против APA600-FGG484)
Заметки по проектированию
Use the manufacturer’s 484-FBGA land pattern and assembly guidelines rather than a generic 484-ball footprint. The 1.0 mm pitch, 23 x 23 mm package requires controlled escape routing, adequate solder-mask and paste design, and alignment capability suitable for fine-pitch BGA assembly. Validate the complete stack-up, copper weight, via strategy, and reflow profile before releasing the PCB.
Plan a low-impedance power distribution network that separates the 2.5 V core supply from other rails and provides local decoupling at the device. Follow the datasheet’s recommended external-component and power-sequencing requirements. Do not infer analog, I/O, or auxiliary voltage values from the 2.5 V core figure; confirm each supply requirement in the device-specific datasheet.
Route clocks and high-speed interfaces with short return paths and continuous reference planes. The 484-FBGA footprint has limited escape-routing freedom, so finalize the pin assignment early and preserve access to configuration, programming, clock, and debug pins. Review every high-speed net for crosstalk, return-path discontinuities, and simultaneous-switching-noise effects.
Do not treat APA600-FG484, APA600-FG484I, APA600-FGG484, and APA600-FGG484I as interchangeable solely because their logic capacities and package pin counts match. Check temperature grade, RoHS and lead-finish status, speed grade, device identification, configuration compatibility, and programming-tool support. A production substitution should be confirmed against the manufacturer ordering table.
Информация о соответствии
The APA600-FG484 product listing identifies the device as RoHS non-compliant. Other compliance attributes are not stated for the exact ordering code.
