APA600-FG484 - 600K Gate 180MHz ProASICPLUS FPGA | Microchip
MPN： APA600-FG484 ✓ 啟用中APA600-FG484 概覽
A ProASICPLUS FPGA is a programmable-logic semiconductor that combines configurable logic blocks, programmable interconnect resources, and embedded memory in one device. Within the product hierarchy, an FPGA is a semiconductor and a programmable-logic IC, while the APA600 belongs to the ProASICPLUS family of Flash-based, nonvolatile FPGAs. The 600K system-gate resource provides substantially more design capacity than small programmable logic devices, supporting parallel data paths, control logic, protocol handling, and moderate signal-processing functions.
The APA600-FG484 includes 370 I/O, which provides a substantial interface complement for connecting external memories, control signals, communications peripherals, and mixed-signal system components. Its 180 MHz device speed is useful for designs operating below the maximum theoretical operating frequency when conservative timing margins are required. The 484-FBGA package also supports dense board layouts, although its fine ball pitch requires careful PCB design, inspection, and assembly planning.
Typical applications include industrial automation, embedded control, communications infrastructure, test equipment, and high-density digital interfaces. The Flash-based configuration architecture is valuable in products that must retain a programmable configuration through power cycles, field updates, or production reprogramming. The device should be selected only after checking the complete electrical, timing, pin, and package constraints for the specific design.
A critical design consideration is that the 484-ball FBGA package is not a simple two-dimensional leaded footprint. The PCB must use the manufacturer-recommended land pattern, power and ground distribution, via arrangement, and assembly profile. Confirm the exact pinout and differential-I/O requirements in the manufacturer datasheet before routing the board. Use the Request a Quote form on this page for current availability, lead time, and commercial terms.
直接替換替代品，適用於 APA600-FG484 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
APA600-FGG484
✅ 直接替換📋 參考替代品（不在目錄中）
APA600-FGG484I
✅ 直接替換📋 參考替代品（不在目錄中）
APA600-FG484I
✅ 直接替換📋 參考替代品（不在目錄中）
APA600-FG484A
✅ 直接替換📋 參考替代品（不在目錄中）
APA600-FG484
✅ 直接替換聯絡詢價
查看資料表 →APA600-FG484 最大額定值與電氣特性
| Product Type | Flash-based ProASICPLUS field-programmable gate array |
| System Gates | 600,000 gates |
| I/O Count | 370 I/O |
| Maximum Operating Frequency | 180 MHz |
| Logic Cell Count | 21,504 cells |
| Technology | 0.22 um CMOS |
| Core Voltage | 2.5 V |
| Configuration Technology | Flash, nonvolatile |
| 封裝 | 484-FBGA, 23 x 23 mm |
| Ball Pitch | 1.0 mm |
| 安裝類型 | Surface mount |
| Lead-Free Status | Lead-free status not stated for APA600-FG484 |
| RoHS 狀態 | Non-compliant |
| 生命週期狀態 | Active |
| Minimum Order Quantity | 60 pieces |
| Lead Time | 16 weeks |
| Programming | Nonvolatile Flash configuration |
APA600-FG484 484-fbga, 23 x 23 mm 腳位配置指南
APA600-FG484（484-fbga, 23 x 23 mm 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： APA600-FG484.
請參閱 資料表 以查看完整腳位配置。
典型應用
APA600-FG484 適用於 6 應用s: Industrial Automation Control, Communications Protocol Bridge, Embedded Data Acquisition, Test and Measurement Equipment, Network Interface Acceleration, Video and Image Processing.
Industrial Automation Control
The APA600-FG484 fits industrial automation controllers that combine parallel sensor conditioning logic, machine-state sequencing, communications, and safety-related interlocks in one programmable device. Its 600,000 system gates and 21,504 logic cells provide room for substantial control logic without relying on several small CPLDs, while 370 I/O support encoders, relay drivers, and field-bus interfaces. Flash-based configuration is useful where the control firmware must remain available after power loss. The 484-FBGA package also reduces board footprint, but it requires qualified assembly processes, fine-pitch inspection, and careful power-delivery design.
推薦
Communications Protocol Bridge
APA600-FG484 can implement protocol conversion, framing, buffering, and interface multiplexing between legacy serial peripherals and newer digital subsystems. Its 370 available I/O and 600K system gates allow multiple parallel datapaths to coexist with state-machine control logic, while the 180 MHz device speed provides useful timing headroom for synchronous interfaces. Flash configuration supports field reprogramming of bridge protocols without volatile SRAM initialization. Engineers should verify the exact I/O standards, clocking resources, and pin assignments for every external transceiver, particularly where source-synchronous signals or differential pairs are involved.
推薦
Embedded Data Acquisition
The APA600-FG484 is suited to embedded data-acquisition systems that must coordinate multiple converters, counters, buffers, and digital interfaces. A 370-I/O complement can connect parallel ADC data buses, clock and control signals, status lines, and external memory interfaces, while 600,000 system gates support acquisition sequencing and test logic. The nonvolatile Flash configuration simplifies field upgrades and preserves setup data across power cycles. Timing closure remains important: the 180 MHz headline frequency is a device-level maximum, and each implemented path must meet timing requirements at its actual clock rate.
推薦
Test and Measurement Equipment
APA600-FG484 can serve in programmable test and measurement equipment where sequencing, pattern generation, instrument-bus control, and acquisition functions must share a single FPGA. Its high logic capacity allows parallel control paths to replace chains of discrete programmable logic devices, and 370 I/O provide extensive connectivity to converters, relays, front-end circuits, and communication transceivers. Flash-based configuration is beneficial in instruments that must retain complex test sequences after power cycling. Designers should reserve resources for clock distribution, debug access, and boundary-scan requirements while maintaining the manufacturer’s recommended 484-FBGA layout.
推薦
Network Interface Acceleration
APA600-FG484 is appropriate for line-rate packet processing, protocol framing, checksum generation, buffering, and traffic-control functions in embedded network equipment. The 600,000-gate architecture provides substantial parallel datapath capacity, and the 370 I/O can support packet interfaces, status controls, clocks, and management signals. Its 180 MHz maximum operating frequency can serve moderate-speed Ethernet, industrial network, or proprietary interface architectures when timing margins are respected. Configuration memory is nonvolatile, which supports reliable boot behavior and simplifies field maintenance, while board-level signal integrity and synchronous-interface timing require careful implementation.
推薦
Video and Image Processing
APA600-FG484 can support parallel pixel pipelines, timing generators, lookup tables, control state machines, and interface adapters in compact image-processing modules. Its 600,000 system gates provide substantially more parallel processing capability than a conventional CPLD, and 370 I/O allow direct connection to CMOS sensors, display interfaces, memories, and pipeline-control signals. The 180 MHz operating ceiling supports many moderate-speed pixel-clock architectures, though actual video timing depends on the selected I/O, clocking scheme, and logic mapping. Use the exact device pinout and package drawing to plan high-speed routing and connector escape paths.
推薦
推薦產品摘要
工程參考資料，適用於 APA600-FG484 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | APA600-FGG484 | APA600-FGG484I | APA600-FG484I | APA600-FG484A | APA600-FG484 |
|---|---|---|---|---|---|---|
| Package | 484-FBGA, 23 x 23 mm | 484-FBGA, 1.0 mm pitch | 484-FBGA, 1.0 mm pitch | 484-FBGA, 1.0 mm pitch | 484-FBGA | 484-FBGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates | 600,000 gates |
| Maximum Operating Frequency | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz |
| Core Voltage | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V |
| Configuration Technology | Nonvolatile Flash | Flash-based ProASICPLUS | Flash-based ProASICPLUS | Flash-based ProASICPLUS | Flash-based ProASICPLUS | Flash-based ProASICPLUS |
主要差異化特點
- Nonvolatile Flash configuration supports field-retained programmable logic (對比APA600-FGG484I)
- RoHS-compliant family options are available for controlled sourcing (對比APA600-FGG484)
- Industrial-temperature ordering options support environmental requirements (對比APA600-FGG484)
設計說明
Use the manufacturer’s 484-FBGA land pattern and assembly guidelines rather than a generic 484-ball footprint. The 1.0 mm pitch, 23 x 23 mm package requires controlled escape routing, adequate solder-mask and paste design, and alignment capability suitable for fine-pitch BGA assembly. Validate the complete stack-up, copper weight, via strategy, and reflow profile before releasing the PCB.
Plan a low-impedance power distribution network that separates the 2.5 V core supply from other rails and provides local decoupling at the device. Follow the datasheet’s recommended external-component and power-sequencing requirements. Do not infer analog, I/O, or auxiliary voltage values from the 2.5 V core figure; confirm each supply requirement in the device-specific datasheet.
Route clocks and high-speed interfaces with short return paths and continuous reference planes. The 484-FBGA footprint has limited escape-routing freedom, so finalize the pin assignment early and preserve access to configuration, programming, clock, and debug pins. Review every high-speed net for crosstalk, return-path discontinuities, and simultaneous-switching-noise effects.
Do not treat APA600-FG484, APA600-FG484I, APA600-FGG484, and APA600-FGG484I as interchangeable solely because their logic capacities and package pin counts match. Check temperature grade, RoHS and lead-finish status, speed grade, device identification, configuration compatibility, and programming-tool support. A production substitution should be confirmed against the manufacturer ordering table.
合規資訊
The APA600-FG484 product listing identifies the device as RoHS non-compliant. Other compliance attributes are not stated for the exact ordering code.
