AS22010P - 10GBASE-T Multi-Rate Ethernet PHY | Aeonsemi
Артикул: AS22010P ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.75 | $257,50 |
| 100 | $22.4 | $2.240,00 |
| 500 | $19.95 | $9.975,00 |
| 1.000 | $17.8 | $17.800,00 |
AS22010P Обзор
An Ethernet PHY (physical layer transceiver) is the analog front-end and digital encoding block that connects a MAC controller to a copper twisted-pair cable. Multi-rate PHYs like the AS22010P auto-negotiate among several IEEE 802.3 speeds on the same RJ45 port, allowing platform designers to upgrade from Gigabit Ethernet to multi-gigabit without changing the magnetics or PCB footprint. Within the broader hierarchy, the AS22010P sits as: Ethernet PHY → physical layer transceiver → network interface IC → wired-connectivity semiconductor. The ChronoPHY™ architecture prioritizes low-jitter clock recovery and PTP/1588 timestamping accuracy to support deterministic networking for AI edge and Wi-Fi 7 backhaul.
Key features include support for NBASE-T and MGBASE-T multi-gig rates (2.5G/5G alongside 10G), extended cable reach beyond the IEEE 802.3 baseline of 55 m on Cat6A, advanced EMC and interference immunity, integrated PTP/1588 timing features, and approximately 40% lower power than the prior generation AS21010P. The BGA package provides a compact 7 mm × 7 mm footprint suitable for high-density switch and NIC designs where PCB real estate is at a premium.
Typical applications include Wi-Fi 7 access-point uplinks, AI-edge inference gateways, multi-gigabit NAS platforms, AV-over-IP bridges, industrial TSN switches, and 10GBASE-T NIC cards. Designers migrating from the first-generation AS21010P can drop the AS22010P into the same board layout while gaining lower power, improved timing accuracy, and extended cable reach. For deterministic AI edge and wireless-infrastructure deployments, the AS22010P's low-jitter clock path directly improves MAC-to-PHY timestamp fidelity, a critical parameter for 5G fronthaul and TSN workflows.
When designing with the AS22010P, observe the BGA PCB-layout recommendations in the datasheet (microvia stack-up, matched 100-ohm differential impedance, and integrated magnetic-module footprint) to preserve EMC performance across the full 100 m cable reach. This page synthesizes manufacturer documentation, second-generation release data, and parameter-by-parameter comparisons not consolidated on any single manufacturer page.
Аналоги без доработки для AS22010P — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с AS22010P (тот же форм-фактор и посадочное место) — отличается по Mounting Type, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
AS21010P
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
AS22010
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
NVT4858UKZ
✅ Прямая замена✓ В наличии
$0.64 / шт.
Открыть даташит →AS22010P Характеристики
| Product Type | Multi-rate Ethernet PHY transceiver |
| Architecture | ChronoPHY™ (Aeonsemi 2nd generation) |
| Ports | Single-port |
| Supported Standards | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-Te |
| Maximum Data Rate | 10 Gbps |
| Auto-Negotiation Rates | 10M / 100M / 1G / 2.5G / 5G / 10G |
| Cable Reach | Extended reach on Cat6A (up to 100 m) |
| Timing Features | PTP/IEEE 1588 timestamping, low-jitter clock recovery |
| Диапазон рабочих температур | -40 °C to +85 °C (industrial) |
| Корпус | 7 mm × 7 mm BGA |
| Тип монтажа | Surface Mount (BGA) |
| Power Reduction vs 1st Gen | Approximately 40% lower than AS21010P |
| Typical Applications | Wi-Fi 7 APs, AI edge, TSN switches, NAS, AV-over-IP |
| Compliance | IEEE 802.3an, IEEE 802.3bz, IEEE 802.3u, IEEE 1588 |
| Статус RoHS | Compliant |
Руководство по цоколевке AS22010P в корпусе 7 mm × 7 mm bga
Цоколевка для AS22010P (корпус 7 mm × 7 mm bga). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для AS22010P.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
AS22010P подходит для 6 применениеs: Wi-Fi 7 Access-Point Uplink, AI-Edge Inference Gateway, Multi-Gigabit NAS Platform, Industrial TSN Switch, AV-over-IP Bridge, 10GBASE-T Network Interface Card.
Wi-Fi 7 Access-Point Uplink
The AS22010P provides the 10GBASE-T backhaul link between Wi-Fi 7 tri-band access points and the upstream switch or cloud gateway. Its multi-rate NBASE-T/MGBASE-T support auto-negotiates 2.5G/5G/10G on existing Cat6A cabling, allowing operators to upgrade AP uplinks without re-pulling cable. The ChronoPHY™ 2nd-generation low-jitter clock path delivers the timestamp accuracy required for multi-AP coordination and 802.11be MLO synchronization, while the ~40% power reduction over 1st-gen PHYs eases PoE+ thermal budgets in ceiling-mounted APs.
Рекомендуется
AI-Edge Inference Gateway
Deterministic AI-edge inference workloads require bounded-latency Ethernet to synchronize GPU/NPU clusters across the edge fabric. The AS22010P's integrated PTP/IEEE 1588 hardware timestamping and ChronoPHY™ low-jitter clock recovery directly improve MAC-to-PHY timestamp fidelity, which is critical for distributed inference and federated-learning workflows. The BGA-49 package allows the PHY to sit adjacent to the switch ASIC on dense edge-AI boards, and the -40 °C to +85 °C industrial temperature range supports factory and outdoor edge deployments.
Рекомендуется
Multi-Gigabit NAS Platform
The AS22010P is the ideal PHY for multi-gigabit NAS platforms running local AI inference or AV-over-IP serving. A single 10GBASE-T port delivers 10× the bandwidth of legacy Gigabit NAS backplanes, while auto-negotiating down to 2.5G/5G when connected to mixed-rate switches. Aeonsemi's launch materials cite NAS as a primary target. The 7 mm × 7 mm BGA allows dense multi-port NAS designs, and the extended cable reach beyond the IEEE 802.3an baseline of 55 m on Cat6A gives NAS designers headroom for in-rack and cross-room cabling.
Рекомендуется
Industrial TSN Switch
Time-Sensitive Networking (TSN) switches in factory-automation and process-control applications require Ethernet PHYs with hardware timestamping and bounded latency. The AS22010P's ChronoPHY™ architecture was explicitly designed for TSN, with sub-microsecond timestamp accuracy and deterministic latency for IEEE 802.1Qbv scheduling. The -40 °C to +85 °C industrial temperature range supports harsh factory environments, and the extended cable reach simplifies wiring in large industrial cells. Up to 40% lower power than 1st-gen PHYs reduces switch thermal load.
Рекомендуется
AV-over-IP Bridge
AV-over-IP systems transport uncompressed 4K/8K video over Ethernet and demand deterministic, low-latency links to avoid lip-sync artifacts. The AS22010P provides the 10G bandwidth and ChronoPHY™ timing accuracy needed for HDMI-over-IP and SDVoE deployments. Multi-rate auto-negotiation allows the bridge to fall back to 2.5G/5G when connected to legacy switches, while the extended cable reach supports in-wall and rack-to-rack AV distribution without intermediate repeaters.
Рекомендуется
10GBASE-T Network Interface Card
The AS22010P enables single-port 10GBASE-T NIC cards for workstations, servers, and content-creation systems. Its low power (~40% below 1st-gen) helps NIC cards fit within PCIe-slot thermal envelopes, and the small 7 mm × 7 mm BGA footprint simplifies layout on space-constrained riser cards. Multi-rate support means a single NIC can connect to any switch from 100M legacy gear to 10G enterprise cores, providing plug-and-play flexibility for IT rollouts.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для AS22010P — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | AS21010P | AS22010 | NVT4858UKZ |
|---|---|---|---|---|
| Brand | Aeonsemi | Aeonsemi | Aeonsemi | NXP Semiconductors |
| Package | 7 mm × 7 mm BGA | 7 mm × 7 mm BGA - same | 7 mm × 7 mm BGA - same | BGA - same footprint class |
| PTP/IEEE 1588 Timestamping | Yes (hardware) | Yes (software-assisted) | Optional | No |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
Ключевые отличия
- ChronoPHY 2nd-gen architecture with integrated PTP/IEEE 1588 hardware timestamping (против AS21010P)
- Approximately 40% lower power than 1st generation (против AS21010P)
- Extended cable reach beyond IEEE 802.3an baseline (против AS21010P)
Заметки по проектированию
Use a 4-layer PCB stack-up with a continuous ground plane beneath the AS22010P BGA to control the 100-ohm differential impedance on the MDI traces. Route the four MDI differential pairs with matched length (within 5 mils) and keep series components within 200 mils of the BGA balls. Add stitching vias around the BGA perimeter to suppress common-mode noise that could degrade 10GBASE-T BER margins on long Cat6A runs.
The 7 mm × 7 mm BGA package has limited heat dissipation at full 10G activity. Estimated: at 1.5 W typical 10G active power and 31 C/W θJA on a 4-layer JEDEC test board, the junction rises approximately 47 °C above ambient. In enclosed designs (NIC cards, ceiling APs), provide at least 100 mm² of copper pour directly under the BGA thermal pad to keep junction below 100 °C at 85 °C ambient.
Use an integrated magnetic module (iMag) rated for 10GBASE-T to avoid the insertion-loss and return-loss penalties of discrete magnetics at 10G. The AS22010P datasheet's reference schematics use a specific 1:10-BTL center-tap ratio; deviating from this ratio can cause common-mode current excursions that fail IEEE 802.3an PSD-MASK conformance. Always validate with a TDR measurement on first prototypes.
Do not substitute the AS22010P into an AS21010P socket without re-validating the firmware register map - the ChronoPHY™ 2nd-generation adds new PTP/1588 timestamping registers and removes legacy 1G-only power-management bits. A bootloader check should verify the silicon revision ID before loading firmware. Mixing 1st-gen and 2nd-gen firmware on the same network can cause silent timestamp drift in TSN workflows.
Информация о соответствии
RoHS and lead-free confirmed via Aeonsemi product page. AEC-Q100 not applicable - industrial-grade Ethernet PHY, not an automotive part. Halogen-free and conflict-mineral declarations not explicitly stated in the verified web data.
