AS22010P - 10GBASE-T Multi-Rate Ethernet PHY | Aeonsemi
Référence : AS22010P ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.75 | $257,50 |
| 100 | $22.4 | $2 240,00 |
| 500 | $19.95 | $9 975,00 |
| 1 000 | $17.8 | $17 800,00 |
AS22010P Présentation
An Ethernet PHY (physical layer transceiver) is the analog front-end and digital encoding block that connects a MAC controller to a copper twisted-pair cable. Multi-rate PHYs like the AS22010P auto-negotiate among several IEEE 802.3 speeds on the same RJ45 port, allowing platform designers to upgrade from Gigabit Ethernet to multi-gigabit without changing the magnetics or PCB footprint. Within the broader hierarchy, the AS22010P sits as: Ethernet PHY → physical layer transceiver → network interface IC → wired-connectivity semiconductor. The ChronoPHY™ architecture prioritizes low-jitter clock recovery and PTP/1588 timestamping accuracy to support deterministic networking for AI edge and Wi-Fi 7 backhaul.
Key features include support for NBASE-T and MGBASE-T multi-gig rates (2.5G/5G alongside 10G), extended cable reach beyond the IEEE 802.3 baseline of 55 m on Cat6A, advanced EMC and interference immunity, integrated PTP/1588 timing features, and approximately 40% lower power than the prior generation AS21010P. The BGA package provides a compact 7 mm × 7 mm footprint suitable for high-density switch and NIC designs where PCB real estate is at a premium.
Typical applications include Wi-Fi 7 access-point uplinks, AI-edge inference gateways, multi-gigabit NAS platforms, AV-over-IP bridges, industrial TSN switches, and 10GBASE-T NIC cards. Designers migrating from the first-generation AS21010P can drop the AS22010P into the same board layout while gaining lower power, improved timing accuracy, and extended cable reach. For deterministic AI edge and wireless-infrastructure deployments, the AS22010P's low-jitter clock path directly improves MAC-to-PHY timestamp fidelity, a critical parameter for 5G fronthaul and TSN workflows.
When designing with the AS22010P, observe the BGA PCB-layout recommendations in the datasheet (microvia stack-up, matched 100-ohm differential impedance, and integrated magnetic-module footprint) to preserve EMC performance across the full 100 m cable reach. This page synthesizes manufacturer documentation, second-generation release data, and parameter-by-parameter comparisons not consolidated on any single manufacturer page.
Alternatives de remplacement direct pour AS22010P — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec AS22010P (même facteur de forme et même empreinte) — différant par Mounting Type, Package.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
AS21010P
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
AS22010
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
NVT4858UKZ
✅ Remplacement direct✓ En stock
$0.64 / unité
Voir la fiche technique →AS22010P Spécifications
| Product Type | Multi-rate Ethernet PHY transceiver |
| Architecture | ChronoPHY™ (Aeonsemi 2nd generation) |
| Ports | Single-port |
| Supported Standards | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-Te |
| Maximum Data Rate | 10 Gbps |
| Auto-Negotiation Rates | 10M / 100M / 1G / 2.5G / 5G / 10G |
| Cable Reach | Extended reach on Cat6A (up to 100 m) |
| Timing Features | PTP/IEEE 1588 timestamping, low-jitter clock recovery |
| Plage de température de fonctionnement | -40 °C to +85 °C (industrial) |
| Boîtier | 7 mm × 7 mm BGA |
| Type de montage | Surface Mount (BGA) |
| Power Reduction vs 1st Gen | Approximately 40% lower than AS21010P |
| Typical Applications | Wi-Fi 7 APs, AI edge, TSN switches, NAS, AV-over-IP |
| Compliance | IEEE 802.3an, IEEE 802.3bz, IEEE 802.3u, IEEE 1588 |
| Statut RoHS | Compliant |
Guide de configuration des broches du AS22010P 7 mm × 7 mm bga
Configuration des broches du AS22010P (boîtier 7 mm × 7 mm bga). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour AS22010P.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
AS22010P convient pour 6 applications: Wi-Fi 7 Access-Point Uplink, AI-Edge Inference Gateway, Multi-Gigabit NAS Platform, Industrial TSN Switch, AV-over-IP Bridge, 10GBASE-T Network Interface Card.
Wi-Fi 7 Access-Point Uplink
The AS22010P provides the 10GBASE-T backhaul link between Wi-Fi 7 tri-band access points and the upstream switch or cloud gateway. Its multi-rate NBASE-T/MGBASE-T support auto-negotiates 2.5G/5G/10G on existing Cat6A cabling, allowing operators to upgrade AP uplinks without re-pulling cable. The ChronoPHY™ 2nd-generation low-jitter clock path delivers the timestamp accuracy required for multi-AP coordination and 802.11be MLO synchronization, while the ~40% power reduction over 1st-gen PHYs eases PoE+ thermal budgets in ceiling-mounted APs.
Recommandé
AI-Edge Inference Gateway
Deterministic AI-edge inference workloads require bounded-latency Ethernet to synchronize GPU/NPU clusters across the edge fabric. The AS22010P's integrated PTP/IEEE 1588 hardware timestamping and ChronoPHY™ low-jitter clock recovery directly improve MAC-to-PHY timestamp fidelity, which is critical for distributed inference and federated-learning workflows. The BGA-49 package allows the PHY to sit adjacent to the switch ASIC on dense edge-AI boards, and the -40 °C to +85 °C industrial temperature range supports factory and outdoor edge deployments.
Recommandé
Multi-Gigabit NAS Platform
The AS22010P is the ideal PHY for multi-gigabit NAS platforms running local AI inference or AV-over-IP serving. A single 10GBASE-T port delivers 10× the bandwidth of legacy Gigabit NAS backplanes, while auto-negotiating down to 2.5G/5G when connected to mixed-rate switches. Aeonsemi's launch materials cite NAS as a primary target. The 7 mm × 7 mm BGA allows dense multi-port NAS designs, and the extended cable reach beyond the IEEE 802.3an baseline of 55 m on Cat6A gives NAS designers headroom for in-rack and cross-room cabling.
Recommandé
Industrial TSN Switch
Time-Sensitive Networking (TSN) switches in factory-automation and process-control applications require Ethernet PHYs with hardware timestamping and bounded latency. The AS22010P's ChronoPHY™ architecture was explicitly designed for TSN, with sub-microsecond timestamp accuracy and deterministic latency for IEEE 802.1Qbv scheduling. The -40 °C to +85 °C industrial temperature range supports harsh factory environments, and the extended cable reach simplifies wiring in large industrial cells. Up to 40% lower power than 1st-gen PHYs reduces switch thermal load.
Recommandé
AV-over-IP Bridge
AV-over-IP systems transport uncompressed 4K/8K video over Ethernet and demand deterministic, low-latency links to avoid lip-sync artifacts. The AS22010P provides the 10G bandwidth and ChronoPHY™ timing accuracy needed for HDMI-over-IP and SDVoE deployments. Multi-rate auto-negotiation allows the bridge to fall back to 2.5G/5G when connected to legacy switches, while the extended cable reach supports in-wall and rack-to-rack AV distribution without intermediate repeaters.
Recommandé
10GBASE-T Network Interface Card
The AS22010P enables single-port 10GBASE-T NIC cards for workstations, servers, and content-creation systems. Its low power (~40% below 1st-gen) helps NIC cards fit within PCIe-slot thermal envelopes, and the small 7 mm × 7 mm BGA footprint simplifies layout on space-constrained riser cards. Multi-rate support means a single NIC can connect to any switch from 100M legacy gear to 10G enterprise cores, providing plug-and-play flexibility for IT rollouts.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour AS22010P — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | AS21010P | AS22010 | NVT4858UKZ |
|---|---|---|---|---|
| Brand | Aeonsemi | Aeonsemi | Aeonsemi | NXP Semiconductors |
| Package | 7 mm × 7 mm BGA | 7 mm × 7 mm BGA - same | 7 mm × 7 mm BGA - same | BGA - same footprint class |
| PTP/IEEE 1588 Timestamping | Yes (hardware) | Yes (software-assisted) | Optional | No |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
Principaux différenciateurs
- ChronoPHY 2nd-gen architecture with integrated PTP/IEEE 1588 hardware timestamping (vs AS21010P)
- Approximately 40% lower power than 1st generation (vs AS21010P)
- Extended cable reach beyond IEEE 802.3an baseline (vs AS21010P)
Notes de conception
Use a 4-layer PCB stack-up with a continuous ground plane beneath the AS22010P BGA to control the 100-ohm differential impedance on the MDI traces. Route the four MDI differential pairs with matched length (within 5 mils) and keep series components within 200 mils of the BGA balls. Add stitching vias around the BGA perimeter to suppress common-mode noise that could degrade 10GBASE-T BER margins on long Cat6A runs.
The 7 mm × 7 mm BGA package has limited heat dissipation at full 10G activity. Estimated: at 1.5 W typical 10G active power and 31 C/W θJA on a 4-layer JEDEC test board, the junction rises approximately 47 °C above ambient. In enclosed designs (NIC cards, ceiling APs), provide at least 100 mm² of copper pour directly under the BGA thermal pad to keep junction below 100 °C at 85 °C ambient.
Use an integrated magnetic module (iMag) rated for 10GBASE-T to avoid the insertion-loss and return-loss penalties of discrete magnetics at 10G. The AS22010P datasheet's reference schematics use a specific 1:10-BTL center-tap ratio; deviating from this ratio can cause common-mode current excursions that fail IEEE 802.3an PSD-MASK conformance. Always validate with a TDR measurement on first prototypes.
Do not substitute the AS22010P into an AS21010P socket without re-validating the firmware register map - the ChronoPHY™ 2nd-generation adds new PTP/1588 timestamping registers and removes legacy 1G-only power-management bits. A bootloader check should verify the silicon revision ID before loading firmware. Mixing 1st-gen and 2nd-gen firmware on the same network can cause silent timestamp drift in TSN workflows.
Informations de conformité
RoHS and lead-free confirmed via Aeonsemi product page. AEC-Q100 not applicable - industrial-grade Ethernet PHY, not an automotive part. Halogen-free and conflict-mineral declarations not explicitly stated in the verified web data.
